Calcium ion as a second messenger for o-nitrophenylsulfenyl-adrenocorticotropin (NPS-ACTH) and ACTH in bovine adrenal steroidogenesis

o-Nitrophenyl sulfenyl-modified ACTH (NPS-ACTH) stimulated steroidogenesis acutely in bovine fasciculata-reticularis cells without increase in cellular cAMP synthesis. Application of NPS-ACTH to the cultured cells induced Ca2+ signals in individual cells as detected by video-enhanced microscopic fluorescence measurements. The percentage of Ca2+ signaling cells corresponded well with the increase of steroidogenesis induced by NPS-ACTH below 1 nM. Treatment of the cells with nicardipine, a Ca2+ channel blocker, suppressed the Ca2+ signals except for the transient increase just after the addition of NPS-ACTH and also blocked completely the stimulative effect on the steroidogenesis of NPS-ACTH below 1 nM. At a dosage of NPS-ACTH higher than 10 nM, the stimulative effect of steroidogenesis was partly suppressed by nicardipine and also by AA-861, a lipoxygenase inhibitor. The action of NPS-ACTH might be mediated by both Ca2+ and lipoxygenase metabolite(s) of arachidonic acid as dual second messengers. The effect of ACTH in pM range on the steroidogenesis was suppressed completely by the treatment with nicardipine and AA-861 at the same time, indicating that the action was mediated by both Ca2+ and the lipoxygenase metabolite(s) but not by cAMP. cAMP plays a significant role as a second messenger for ACTH action only at ACTH concentrations greater than 10 pM.     

A procedure to obtain a fully stressed shape of elastic continuum

In this paper, a procedure for obtaining a fully stresses shape of elastic continuum under arbitrary design conditions is proposed, by using the optimum distribution of the material properties such as the Young's modulus or the plate thickness. By using this technique, the optimum multiple-connected shape can be created from the original shape of simply body. The optimum shape of a road-pole subjected to an uniformly distributed load is determined by using the technique, and from the results the effectiveness of the technique is examined numerically.     

Experimental Facsimile Communication System on Packet Switched Data Network

The use of the public data network for facsimile communication has remarkable advantages with regard to high speed and reliable transmission and, in addition, it is well applicable to provide value added facilities for future service extension. The Research and Development Laboratories of Kokusai Denshin Denwa (KDD) Company, Ltd. have developed an experimental facsimile communication system on the packet switched data network (PSDN). The system is composed of packet switching exchanges (PSE), high speed digital facsimile terminal equipment, a facsimile communication processor (FCP), and facsimile packet assembly/ disassembly equipment (FAX-PAD). The facsimile equipment in the system adopts a two-dimensional modified READ code and has the interface protocol to the PSDN. The FCP provides the store-and-forward facilities to provide such services as delayed delivery, multiaddress delivery, and mailbox service. The FAX-PAD realizes the interworking between facsimile equipments on the public switched telephone network (PSTN) and those on PSDN. After various experiments including international field tests, it was confirmed that the system is useful for future advanced facsimile service.     

Defect levels in chromium-doped silicon

The transient capacitance technique has been used to study the chromium-related levels in the silicon band gap. Chromium was diffused at temperature of 1100 and 1150°C for 0.5 and 3 hr. Five different levels at E_c?0.11 eV, E_c?0.21 eV, E_c?0.28 eV, E_c?0.36 eV and E_c?0.45 eV were obtained from the Arrheniu plots of the electron thermal-emission rates. The number of levels in the upper half of the band gap decreased from five to two with an increase of Cr-diffusion period. Two levels were located at E_c?0.20 eV (donor) and E_c?0.43 eV (acceptor). A donor level was also observed at E_v + 0.25 eV. The donor level was not affected by the diffusion condition. The majority carrier capture cross sections of the three dominant levels have been measured by the transient capacitance technique modified by the pulse transformer. The values were σ_n = 4.1 × 10^?15 cm² for the upper donor at E_c?0.20 eV, σ_n = 2.0 × 10^?16 cm² for the acceptor at E_c ?0.43 eV and σ_p = 9.1 × 10^?18 cm² for the lower donor at E_v + 0.25 eV, and were independent of temperature. The three dominant levels are due to distinct chromium centers.     

Photocatalytic degradation of trichloroethylene in water using TiO2 pellets

A recirculating system of aqueous trichloroethylene (TCE) solutions through the packed bed reactor with TiO2 pellets has been developed in order to mineralize TCE without difficulties for filtration and recovery of catalyst. The TiO2 pellets prepared by sol gel method have photocatalytic activity similar to commercially available PC-101 and PC-102 in the powder form and to ST-B11 pellets. In batch experiments with TiO2 powders, Degussa P-25 is the most active photocatalyst, which indicates that specific surface area is not an important factor controlling the photocatalytic activity in aqueous solutions. The degradation rates of TCE in the recirculating system with TiO2 pellets decreased in the presence of H2O2, while were remarkably accelerated by adding S2O8(2-). The presence of S2O8(2-) ions more than 0.01 mol dm(-3) completely suppressed hole-electron recombination and mineralized 50 ppm TCE with the 2 h irradiation. In a reactor without TiO2 photocatalysts, TCE was photodegraded by SO4- radicals which produced by photodissociation of S2O8(2-). The degradation rates increased with increase of the initial S2O8(2-) concentration. However, TCE was not mineralized but converted to intermediates which were slowly degraded to Cl- by continuing the irradiation.     

Compensation of Interchannel Crosstalk Induced by Optical Fiber Nonlinearity in Carrier Phase-Locked WDM System

A scheme that compensates the waveform distortion induced by nonlinear interchannel crosstalk such as four-wave mixing (FWM) and cross-phase modulation as well as self-phase modulation in phase-locked wavelength-division-multiplexing transmission systems is proposed. Reduction of FWM-induced waveform distortion by controlling the phase relationship between neighbouring channels and its cancellation by precompensation is successfully demonstrated     

A Passive UHF RF Identification CMOS Tag IC Using Ferroelectric RAM in 0.35-μm Technology

A passive UHF RF identification (RFID) tag IC with embedded 2-KB ferroelectric RAM (FeRAM) for rewritable applications enables a 2.9 times faster read-and-write transaction time over EEPROM-based tag ICs. The resulting FeRAM-based tag has a nominally identical communication range for both read and write operations, which is indispensable for data write applications. The evaluated tag communication range with a folded dipole antenna is from 0 m to 4.3 m, at the 953-MHz carrier frequency with 4-W transmitting Effective Isotropic Radiated Power (EIRP) from a reader/writer. The developed tag IC features two circuit blocks to maximize the communication range in 0.35-mum CMOS/FeRAM technology. First is a CMOS-only full-wave rectifier, which can improve the measured efficiency by up to 36.6% by reducing the input parasitic capacitances and optimization of multiplier structure. This efficiency is more than twice that of previously-published results. Second is a low-voltage current-mode ASK demodulator to accommodate a low-breakdown voltage of FeRAM, which converts the ASK power modulation into a linearly modulated current over an incoming power range of 27 dB, corresponding to the entire communication range. The developed demodulator can thus resolve the primary design tradeoff issue between device protection and detection sensitivity in the conventional voltage-mode demodulator     

Wide-wavelength tunable lasers with 100 ghz fsr ring resonators

A widely tunable laser, consisting of a 100 GHz FSR triple-ring resonator and a semiconductor optical amplifier, is presented. The 100 GHz FSR ring resonator makes it possible to demonstrate 96 nm wavelength tuning with stable single-mode operation produced by a large threshold gain difference     

Self-dissolving micropile array tips for percutaneous administration of insulin

Two kinds of insulin were loaded into self-dissolving micropile array tip (following tip). Fully-loaded tip (f-tip) and partially-loaded tip (p-tip) were prepared using chondroitin sulfate for the percutaneous administration of insulin. One hundred micropiles were constructed on a 1.0 × 1.0 cm tip. The mean length of the micropile in a tip were 483.4 ± 4.7 μm for the f-tip and 492.6 ± 2.4 μm for the p-tip. The insulin content of the p-tip was 28.5% of that of the f-tip. The pharmacological efficiency of insulin loaded tip was evaluated in rat experiments by measuring their hypoglycemic effects. The maximum hypoglycemic effect of insulin was observed at 1.7 ± 0.2 h for the f-tip and 1.5 ± 0.2 h for the p-tip. Good dose-dependency was observed for the plasma glucose level vs. time curves. These results suggest the usefulness of p-tip as a percutaneous DDS of insulin.