Equating student satisfaction measures

Colleges and universities conduct student satisfaction studies for many important policy making reasons. However the differences in instrumentation and the use of students' self-reported ratings of satisfaction makes such decisions sample-, instrument-, and institution-dependent. A common metric of student satisfaction would assist decision makers by providing a richness of information not typically obtained. The present study investigated the extent to which two nationally known instruments of student satisfaction could be scaled on the same quantitative metric. Pseudo-common item equating (Fisher, 1997) based on five link items of low and high endorsability enabled comparisons of "similar, but not identical items, from different instruments, calibrated on different samples" (p. 87). Results suggest that both instruments measured similar constructs and could be reasonably used to create a single, common metric. While samples used in the experiment were less than ideal, results clearly demonstrated the usefulness and reasonability of the pseudo-common item equating process.     

Mechanical characteristics of optical coatings prepared by various techniques: a comparative study

Good performance of optical coatings depends on the appropriate combination of optical and mechanical properties. Therefore, successful applications require good understanding of the relationship between optical microstructural and mechanical characteristics and film stability. In addition, there is a lack of standard mechanical tests that allow one to compare film properties measured in different laboratories. We give an overview of the methodology of mechanical measurements suitable for optical coatings; this includes depth-sensing indentation, scratch resistance, friction, abrasion and wear testing, and stress and adhesion evaluation. We used the techniques mentioned above in the same laboratory to systematically compare the mechanical behavior of frequently used high- and low-index materials, namely, TiO2, Ta2O5, and SiO2, prepared by different complementary techniques. They include ion-beam-assisted deposition by electron-beam evaporation, magnetron sputtering, dual-ion-beam sputtering, plasma-enhanced chemical-vapor deposition, and filtered cathodic arc deposition. The mechanical properties are correlated with the film microstructure that is inherently related to energetic conditions during film growth.     

Impact of Fiber Non-linearity in High Capacity WDM Systems and in Cross-Connected Backbone Networks

The rapidly increasing data traffic volumes will demand for very high transmission capacity and network nodes throughput. Wavelength division multiplexing (WDM) technology will be asked to support many channels on the same fiber, both in point-to-point links and in WDM optical networks. The transmission of a high number of wavelength channels in all these systems is a key issue. This paper analyzes this topic, in both high capacity links and optical networks, highlighting the impact of fiber non-linearity, and addressing the main source of impairments. This is done through the use of a semi-analytical model recently upgraded to account for all the contributions deriving from Kerr effects, particularly four-wave mixing and cross-phase modulation. The analysis reveals that more than one hundred of channels at 2.5 Gbit/s can be transmitted in point-to-point links whose length can span until the order of 1000 km, and 32 channels per fiber, at the previous bit rate, can be handled in WDM networks, without dispersion compensation. For a higher number of channels (e.g., 64) dispersion compensation is needed.     

The complexity of mean flow time scheduling problems with release times

We study the problem of preemptive scheduling of n} jobs with given release times on m identical parallel machines. The objective is to minimize the average flow time. In this paper, show that when all jobs have equal processing times then the problem can be solved in polynomial time using linear programming. Our algorithm can also be applied to the open-shop problem with release times and unit processing times. For the general case (when processing times are arbitrary), we show that the problem is unary NP-hard. P. Baptiste and C. Dürr: Supported by the NSF/CNRS grant 17171 and ANR/Alpage. P. Brucker: Supported by INTAS Project 00-217 and by DAAD PROCOPE Project D/0427360. M. Chrobak: Supported by NSF grants CCR-0208856 and INT-0340752. S. A. Kravchenko: Supported by the Alexander von Humboldt Foundation.     

The use of natural Kazakhstan zeolites for the development of gas purification catalysts

The results of investigation of catalysts based on natural zeolite in comparison with synthetic ZSM-5 zeolite used in reduction of nitrogen oxides and conversion of carbon monoxide are presented. It was found that rearrangement of the crystal structure of natural zeolite begins upon heating it above 500 °C in air. The structure of natural zeolite has been improved by introduction of various modifiers and selection of thermal regime of samples training. It has been shown that developed compositions of press-mass for preparation of carriers for gas purification catalysts in the form of granules and tablets satisfy the requirements on ductility and mechanical strength. The efficiency of synthesized granular and block Cu–Ce, Cu–Ni–Cr, Ti–V, Ti–VW, and TiO₂–V₂O₅ catalysts based on natural and synthetic zeolites was determined in conversion of CO and nitrogen oxides. The results of X-ray structure analysis of clinoptilolite of the Republic of Kazakhstan deposits—Chankanai and Taizhuzgen—are represented in comparison with synthetic ZSM-5 zeolite. The paper also comprises data about their thermal stability, ductility, and strength of compositions on their base. Metals particles morphology and dispersity are studied by the method of electronic microscopy. These particles were used as active components of synthesized catalysts.     

Effect of different fermentation parameters on bioethanol production from corn meal hydrolyzates by free and immobilized cells of Saccharomyces cerevisiae var. ellipsoideus

BACKGROUND: Bioethanol produced from renewable biomass, such as corn meal, is a biofuel that is both renewable and environmentally friendly. Significant scientific and technological investments will be needed to achieve substitution of conventional fossil fuels with alternative fuels. The ethanol fermentation of enzymatically obtained corn meal hydrolyzates by free and immobilized cells of Saccharomyces cerevisiae var. ellipsoideus yeast in a batch system was studied. The initial glucose and inoculum concentration and the time required for the efficient ethanol production were optimized taking into account parameters such as ethanol concentration, ethanol yield, percentage of the theoretical yield of ethanol and volumetric productivity in both immobilized and free cell systems. RESULTS: The yeast cells were immobilized in Ca–alginate by an electrostatic droplet generation method. An optimal initial inoculum concentration of 2% (v/v) and optimal fermentation time of 38 h for both immobilized and free yeasts were determined. An optimal initial glucose concentration of 150 g L^?1 for free system was achieved. At the initial glucose concentration of 176 g L no substrate or product inhibition were achieved with immobilized yeast. CONCLUSION: By immobilization of the yeast into Ca–alginate using the method of electrostatic droplet generation a superior system was realized, which exhibited lower substrate inhibition and higher tolerance to ethanol. The cells of S. cerevisiae var. ellipsoideus yeast entrapped in Ca–alginate showed good physical and chemical stability, and no substrate and product diffusion restrictions were noticed. Copyright © 2008 Society of Chemical Industry     

Influence of thermal cycling treatment on the anneal hardening effect of Cu–10Zn Alloy

This paper reports the results of investigations on the influence of the so called thermal cycling treatment on the anneal hardening effect of the copper-based Cu–10 at.% Zn alloy. The quenched samples were subjected to cold rolling of 20, 40 and 60% in reduction, followed by annealing with and without thermocycling treatment below the recrystallization temperature. Anneal hardening effect was observed in both samples in the temperature range between 180 and 300 °C and was followed by an increase in the hardness and electrical conductivity. These investigations showed that the thermal cycling treatment some increased the intensity of anneal hardening effect.     

Gas-phase Photocatalytic Oxidation of Acrylonitrile on Sulphated TiO<Subscript>2</Subscript>: Continuous Flow and Transient Study

Abstract  

The gaseous products of photocatalytic oxidation (PCO) of acrylonitrile on sulphated P25 in concentrations from 10 to 100 ppm at 60 to 130 °C were CO₂, HCN and HNCO. This photocatalyst showed disproportionally improved performance at higher temperature and longer retention times. The temperature-programmed oxidation (TPO) after PCO disclosed possible reaction routes.     

Some Characteristics of Free Cell Population in the Airways of Rats after Intratracheal Instillation of Copper-Containing Nano-Scale Particles

We used stable water suspensions of copper oxide particles with mean diameter 20 nm and of particles containing copper oxide and element copper with mean diameter 340 nm to assess the pulmonary phagocytosis response of rats to a single intratracheal instillation of these suspensions using optical, transmission electron, and semi-contact atomic force microscopy and biochemical indices measured in the bronchoalveolar lavage fluid. Although both nano and submicron ultrafine particles were adversely bioactive, the former were found to be more toxic for lungs as compared with the latter while evoking more pronounced defense recruitment of alveolar macrophages and especially of neutrophil leukocytes and more active phagocytosis. Based on our results and literature data, we consider both copper solubilization and direct contact with cellular organelles (mainly, mitochondria) of persistent particles internalized by phagocytes as probable mechanisms of their cytotoxicity.