A.c.conduction mechanisms in poly(1-ethynylnaphtalene)

Summary The a.c.conduction mechanism in poly(1-ethynylnaphtalene) with various physical and isomeric (cis-cisoidal and trans-cisoidal) structures was investigated over the frequency and temperature ranges of 10–10⁵Hz and 190–373°K respectively.The conduction mechanism depends on the isomeric structure of the polymer,and for the cis-cisoidal polymer supplementary on temperature and frequency.Over the whole frequency range(at 190°K) and above a critical frequency (at higher temperatures),which is temperature dependent,the quantum hopping mechanism is involved in cis-cisoidal polymer.Outside of this range the conduction process takes place by two parallel mechanisms: band and hopping mechanisms.In trans-cisoidal polymer the quantum hopping mechanism is involved over the whole frequency and temperature range considered.     

Method for reconstructing atmospheric optical parameters from the data of polarization lidar sensing

Inversion of polarization lidar sensing data based on the form of the lidar sensing equation with allowance for contributions from multiple-scattering calls for a priori information on the scattering phase matrix. In the present study the parameters of the Stokes vectors for various propagation media, including those with the scattering phase matrices that vary along the measuring range, are investigated. It is demonstrated that, in spaceborne lidar sensing, a simple parameterization of the multiple-scattering contribution is applicable and the polarization signal's characteristics depend mainly on the lidar and depolarization ratios, whereas differences in the angular dependences of the matrix components are no longer determining factors. An algorithm for simultaneous reconstruction of the profiles of the backscattering coefficient and depolarization and lidar ratios in an inhomogeneous medium is suggested. Specific features of the methods are analyzed for the examples of interpretation of lidar signal profiles calculated by the Monte Carlo method and are measured experimentally.     

Sequential synthesis of type II colloidal CdTe/CdSe core-shell nanocrystals

Colloidal type II CdTe/CdSe nanocrystals were synthesized by sequential addition of a tri-n-octylphosphine telluride (TOPTe)/TOP solution and several shell-precursor solutions to a CdO/TOP solution; the shell-precursor solutions consisted of CdO and TOPSe in TOP. For the growth of the CdTe core, the TOPTe/TOP solution was swiftly added to the CdO/TOP solution at a higher temperature (300 degrees C) than the growth temperature (250 degrees C). For the growth of the CdSe shell, in contrast, the CdO/TOPSe/TOP solution was slowly added to the CdTe/TOP solution at a lower temperature than the growth temperature (200-240 degrees C). The temporal evolution of the optical properties of the growing core-shell nanocrystals was monitored in detail. During the growth of the CdSe shell, the core-shell nanocrystals exhibited interesting changes in photoluminescence (PL) properties. The highest PL efficiency (approximately 38 %) was detected from core-shell nanocrystals with a CdSe shell thickness of 0.4-0.5 nm (indicated by TEM); the formation of the first monolayer is proposed. Our synthetic approach is well suited to a practical realization of engineering materials with bandgaps in the near-IR and IR spectral ranges.     

Microstructure, Chemical and Phase Composition of Chromium Silicide Diffusion Coatings on Carbon Steels

The microstructure, chemical and phase composition of chromium silicide diffusion coatings on steels 20, 45, U8, and U10 are studied. It is established that the phases Cr²³C⁶ and Cr⁷C³ with a silicon content in them of up to 0.25 at.% form at the surface of chromium silicide coatings. The maximum silicon content at 7% in steels 20 and 45 is observed beneath the carbide layer at a depth of 40–50 µm, but for steel U10 it is 1.9% at the carbide layer-matrix boundary. It is shown that the corrosion resistance of chromium silicide diffusion coatings increases markedly compared with uncoated specimens: by a factor of 15–30 depending on the acid used (H₂SO₄, HCl, H₃PO₄, HNO₃, CH₃COOH). There is also an increase in the cavitation resistance of articles with chromium silicide coatings in water and 3% NaCl solution.__________Translated from Poroshkovaya Metallurgiya, Nos. 1–2(441), pp. 23–30, January–February, 2005.     

An alternative method for fabricating microcontact printing stamps

In this paper, we describe the development of microcontact printing stamps from photopatternable silicone. The photopatternability of this material enables convenient and fast stamp fabrication, and allows rapid patterning of substrates for culturing biological cells. Microcontact printing stamps made of the photopatternable silicone with linewidths as small as 2 μm were fabricated and reliable cell patterning results were obtained by optimizing the stamping process. An optimal stamp surface was obtained by optimizing the photolithographic process. Our successful demonstration of patterning cells using the photopatternable silicone stamps establishes this alternative approach for fabricating microcontact printing stamps.     

Bioethanol production from corn meal by simultaneous enzymatic saccharification and fermentation with immobilized cells of Saccharomyces cerevisiae var. ellipsoideus

The simultaneous enzymatic saccharification and fermentation (SSF) of corn meal using immobilized cells of Saccharomycescerevisiae var. ellipsoideus yeast in a batch system was studied. The yeast cells were immobilized in Ca-alginate by electrostatic droplet generation method. The process kinetics was assessed and determined and the effect of addition of various yeast activators (mineral salts: ZnSO₄ · 7H₂O and MgSO₄ · 7H₂O, and vitamins: Ca-pantothenate, biotin and myo-inositol) separately or mixed, was investigated. Taking into account high values of process parameters (such as ethanol concentration, ethanol yield, percentage of the theoretical ethanol yield, volumetric productivity and utilized glucose) and significant energy savings the SSF process was found to be superior compared to the SHF process. Further improvement in ethanol production was accomplished with the addition of mineral salts as yeast activators which contributed to the highest increase in ethanol production. In this case, the ethanol concentration of 10.23% (w/w), percentage of the theoretical ethanol yield of 98.08%, the ethanol yield of 0.55 g/g and the volumetric productivity of 2.13 g/l·h were obtained.     

Acceptive Immunity: The Role of Fucosylated Glycans in Human Host–Microbiome Interactions

The growth in the number of chronic non-communicable diseases in the second half of the past century and in the first two decades of the new century is largely due to the disruption of the relationship between the human body and its symbiotic microbiota, and not pathogens. The interaction of the human immune system with symbionts is not accompanied by inflammation, but is a physiological norm. This is achieved via microbiota control by the immune system through a complex balance of pro-inflammatory and suppressive responses, and only a disturbance of this balance can trigger pathophysiological mechanisms. This review discusses the establishment of homeostatic relationships during immune system development and intestinal bacterial colonization through the interaction of milk glycans, mucins, and secretory immunoglobulins. In particular, the role of fucose and fucosylated glycans in the mechanism of interactions between host epithelial and immune cells is discussed.     

Purification of brines by chemical precipitation and ion‐exchange processes for obtaining battery‐grade lithium compounds

Lithium salts are very important in the production of lithium batteries since they are used as precursors for the fabrication of cathode materials that require very low level of impurities (battery grade). Usually, the lithium extraction process from brine first yields lithium carbonate, which is then used as raw material for the production of other lithium compounds. However, it implies an increase in investment costs, considering more equipment and process stages. To remove the impurities and produce battery‐grade lithium compounds directly from brines, a laboratory‐scale process was developed using the methods of ion exchange and chemical precipitation. Thus, impurity‐free brine ready to be used in an industrial membrane electrolysis process is obtained. Different sequences and operating conditions were investigated for the purification of lithium‐concentrated brines, removing the main impurities of the natural brines: calcium, magnesium, and sulfate. For the characterization of solutions, crystals, and ion‐exchange resins, atomic absorption spectrophotometry, scanning electron microscopy, and X‐ray scattering spectroscopy were used. The results indicate that during the chemical precipitation process, lithium‐concentrated brine reacted with some additives (precipitating agents) at different stages in the batch reactors. Subsequently, the pulp obtained was sedimented and filtered, eliminating or reducing the impurities of the lithium brine. Thus, the most efficient precipitation sequence was evaluated as a function of the removal percentage of the species. The removal efficiencies obtained for Ca⁺², Mg⁺², and SO₄^?2 were of 98.93%, 99.93%, and 97.14%, respectively. Thereafter, the use of the ion‐exchange resins reduced the concentration of Ca⁺² and Mg⁺² to the values below 1 ppm. The combined use of both processes provided promising results that could be applied in the industry.