Resolution of a Five-Component Mixture of Quaternary Ammonium Surfactants on Silica Gel 60 <Emphasis Type=Italic>F</Emphasis><Subscript>254</Subscript> High Performance Thin Layer Chromatographic Plates

The mutual separation of a mixture of cetyltrimethyl ammonium chloride (CTAC), methyl trioctyl ammonium bromide (MTOB), dodecyltrimethyl ammonium chloride (DTAC), benzyltrimethyl ammonium chloride (BTAC) and tetrabutyl ammonium bromide (TBAB), was achieved on silica high performance thin layer chromatographic plates using dimethyl sulfoxide with aqueous sodium-l-tartrate dibasic dihydrate as the solvent system. The effect of concentration of sodium-l-tartrate dibasic dihydrate on the mobility of all the five quaternaries was examined. The limit of detection of CTAC, MTOB, DTAC, BTAC and TBAB was estimated as 0.6, 0.6, 0.3, 0.6 and 0.3 μg/zone, respectively. The method developed was utilized to identify these surfactants in different spiked water samples after their preliminary separation.     

Performance and Microstructural Study on Soap Using Different Fatty Acids and Cations

The desired benefits of the finished soap product are governed by a professional selection of appropriate raw materials, the manufacturing process or both. A better understanding of the crystallization of the soap microstructure is needed which has direct effects on the properties of final products. Soap microstructures and soap composition are not only determined by the length of hydrophobic fatty chain, saturation extent of fatty acid chain, fatty acid distribution but also by the cation effect. Thus, four different fatty acid compositions and the effect of sodium and potassium cations were studied. The performance of the potassium and sodium bar soaps prepared was monitored and was correlated with solid phase thermal analysis. The microstructural effect was examined using ATR-FTIR, FESEM and XRD. The specific ion effect and ion interaction involving both cations and carboxylate anions on different chemical compositions was correlated.     

Effects of Reaction Parameters in Catalysis of Glycerol Oxidation by Citrate-Stabilized Gold Nanoparticles

Abstract  

This work describes a catalytic oxidation of glycerol using citrate-stabilized gold nanoparticles (citrate-AuNPs) having a mean diameter of 22 ± 3 nm. A careful product analysis was performed by mean of high-performance liquid chromatography, liquid chromatography–mass spectrometry and nuclear magnetic resonance spectroscopy. Effects of reaction temperature, oxygen pressure, catalyst and reactant concentration, and NaOH/glycerol molar ratio on glycerol conversion, and product yields were investigated. The glycerol conversion and glyceric acid yield were optimum when the oxidation was performed using 0.6 M glycerol and NaOH at 80 °C under 3 bar of O₂ pressure in the presence of 50 ppm citrate-AuNPs catalyst for 3 h.     

The utilization of microencapsulated phase change material wallboards for energy saving

Wallboards with micro encapsulated phase changing material (micro PCM) were used to investigate the performance and the energy saving characteristics as building materials in winter and summer climate conditions. The test house consisted of a boiler with under floor heating system, an air conditioner, micro PCM wallboard room and conventional wallboard room. The outer temperature of the rooms could be artificially controlled at the temperature range of −12 to 35 °C. Micro PCM content in wallboards was 0–4 kg/m². The melting temperature and latent heat of Micro PCM are 23 °C and 211 J/g. Also, micro PCM shows stable mechanical strength under 500 psi. As micro PCM content increased, the temperature fluctuations decreased. In case of micro PCM wallboard, temperature profiles in the room show stable and comfortable ranges. The optimum amount of micro PCM in wallboard to maximize energy saving efficiency was around 3 kg/m².     

Methylation of methyltrichlorosilane with methyl chloride over active metals and activated carbon

Gas phase methylation of methyltrichlorosilane with methyl chloride to high-valued dimethyldichlorosilane was carried out by using metallic aluminum as a chlorine acceptor in the co-presence of activated carbon, tin, and zinc. The addition of activated carbon in metallic aluminum significantly enhanced the methylation of methyltrichlorosilane, and dimethyldichlorosilane was dominantly produced. Activated carbon played a catalyst role in the methylation reaction. When active metals, such as tin and zinc, were added in the mixture of aluminum and activated carbon, the active metals and activated carbon synergistically catalyzed the methylation of methyltrichlorosilane with methyl chloride toward the formation of dimethyldichlorosilane.     

Application of statistical experimental design for optimization of downstream process for recovery of pullulan produced by <Emphasis Type=Italic>Aureobasidium pullulans</Emphasis> HP-2001

The optimal conditions of the downstream process for recovery of pullulan produced by Aureobasidium pullulans HP-2001 were examined using response surface method (RSM). The optimal amount of diatomite in filter press and the optimal flow rate in a continuous flow centrifuge for removal of cells from the culture broth of A. pullulans HP-2001 were found to be 5.0% (v/v) and 2.0 L/min. Based on central composite design (CCD) experiments and analysis of variance (ANOVA) indicated that the optimal conditions for recovery of pullulan from the supernatant by precipitation were the volume ratio of ethanol (or isopropanol) to supernatant of 3.0: 1.0, the reaction time of 29.5 h, and the reaction temperature of 20.2 °C. The expected maximal recovery yields of pullulan using ethanol and isopropanol under optimized conditions were 79.2 and 85.5%, respectively.     

Examining the effects of velocity ratio of the pressurized flow to the main inlet flow on coagulants dispersion in pump diffusion mixer

This study was conducted to evaluate the ratio of the pressurized flow to the main inlet flow, which has been considered one of the most important parameters for operating the pump diffusion mixer (PDM). Computational fluid dynamics (CFD) simulation was employed to evaluate the conventional operation rule of PDM and to propose a supplementary operating parameter and criterion. Test simulation of CFD was carried out for the 21 cases of flow ratio in a full scale PDM. The values of local velocity gradient were calculated in each case to analyze the simulation results in more detail. A wet test was conducted to verify CFD simulation results, which measures the factual coagulant dispersion distribution at a distance of 5.4 m from deflector. From results of both CFD simulation and wet test, the flow ratio was adequate as an operating parameter or criterion; also, the velocity ratio (dimensionless) of the pressurized flow to the main inlet was useful in predicting the performance of PDM. In addition, the injected coagulant could be dispersed evenly in overall cross section on the condition that the velocity ratio is at least over 20.     

Physico-chemical properties of silica aerogels prepared from TMOS/MTMS mixtures

In the present work, results on the physico-chemical properties of the silica aerogels prepared by sol–gel process using mixtures of TMOS and MTMS as precursor are reported. The wide range of precursor mixture was studied with ratio of MTMS/TMOS in precursor mixtures as 0:100, 25:75, 50:50, 75:25, and 100:0 by volume. The gels with these precursor mixtures were successfully prepared using two step acid–base catalysis for gelation. Acetic acid (0.001 M) and NH₄OH (1.5 M) were used for catalysis and resulting alcogels were subsequently dried by supercritical solvent extraction method. FTIR spectroscopy revealed that the aerogels show more intense peak at 1,260 and 790 cm⁻¹ attributed to Si–CH₃ resulting in more hydrophobic nature and these results were concurrent with adsorbed water content measurements made using Karl Fischer’s titration technique. The resulted aerogels were characterized using differential thermal analysis, thermo gravimetric analysis and surface area measurements. The surface area measurements showed an interesting trend that the surface area increased from 395 to 1,037 m²/g with increase in MTMS content in the precursor mixture from 0 to 50% and then again decreased to 512 m²/g for further increase in MTMS content from 50 to 100% in the precursor mixture. It was observed from our studies that silica aerogels prepared using a starting mixture of 50% TMOS and 50% MTMS resulted in high moisture resistance (adsorbed water content of 0.721% w/w), low density of 90 kg/m³ and the highest surface area of 1,037 m²/g, which has great potential for catalysis support applications.