Effect of porosity and hydrostatic pressure on water absorption in a semicrystalline fluoropolymer

This paper discusses the effect of porosity and hydrostatic pressure on diffusion kinetics and equilibrium water uptake in a semicrystalline fluoropolymer. Water sorption experiments at atmospheric pressure and under water pressures up to 250 MPa were carried out during 18 months at 40 °C on reference and porous samples. Porosity of samples was induced due to a cavitation process occurring at the highest triaxiality area of waisted and notched specimens during tensile tests. Water uptake was found to be very sensitive to porosity, showing an increase in samples with a high void fraction. On the other hand, water content decreased with increasing pressure suggesting a compaction of the porous space in which water can be stored. Two models describing this water uptake behaviour were considered. The first is a classical model which assumes that sorption occurs only by diffusion following Fick’s law. Fick’s model was found to be in agreement with the experimental results. A “Langmuir-type” sorption model was also proposed to describe water uptake in porous samples, considering a two-phase water transport mechanism: one portion of the absorbed water diffuses through the polymer matrix and the other portion is stored in voids. This model was implemented in a user subroutine using ABAQUS? software and simulations were confronted to experimental sorption curves showing satisfactory agreements. The potential of the Langmuir-type sorption model resides on its availability to be coupled to a poro-mechanical model, in order to improve the understanding of coupling between the mechanical behaviour and water sorption mechanism in a porous polymer.     

Improving the performances of earth air heat exchangers through Constructal design

Earth to air heat exchanger (EAHE) is a well‐known technique used to preheat or precool outdoor air before blowing it into a building. However, its geometry is often very simple as it consists in one or multiple straight pipes, while more complex arrangements can be found in heat exchangers design. In this paper, we explore the advantage of designing an EAHE as a network through the Constructal law point of view. A methodology is first proposed to design a single pipe EAHE when the need is defined in terms of cooling power, overall efficiency and enthalpy difference between the inlet air and the ground. Next, the single pipe EAHE is used as a reference for designing a tree‐shaped network under the constraint of identical fluid volume and cooling power. The geometrical features are allowed to change for the different branches of the network. The network coefficient of performance is found to increase significantly with the bifurcation level, illustrating the superior performances of the network. This approach was found to be robust as the improvements were not depending on the cooling demand or the environmental conditions. However, further work is needed to move from this theoretical result to practical considerations.     

Study of the Transit-Time Limitations of the Impulse Response in Mid-Wave Infrared HgCdTe Avalanche Photodiodes

The impulse response in frontside-illuminated mid-wave infrared HgCdTe electron avalanche photodiodes (APDs) has been measured with localized photoexcitation at varying positions in the depletion layer. Gain measurements have shown an exponential gain, with a maximum value of M = 5000 for the diffusion current at a reverse bias of V _b = 12 V. When the light was injected in the depletion layer, the gain was reduced as the injection approached the N+ edge of the junction. The impulse response was limited by the diode series resistance–capacitance product, RC, due to the large capacitance of the diode metallization. Hence, the fall time is given by the RC constant, estimated as RC = 270 ps, and the rise time is due to the charging of the diode capacitance via the transit and multiplication of carriers in the depletion layer. The latter varies between t _10–90 = 20 ps (at intermediate gains M < 500) and t _10–90 = 70 ps (at M = 3500). The corresponding RC-limited bandwidth is BW = 600 MHz, which yields a new absolute record in gain–bandwidth product of GBW = 2.1 THz. The increase in rise time at high gains indicates the existence of a limit in the transit-time-limited gain–bandwidth product, GBW = 19 THz. The impulse response was modeled using a one-dimensional deterministic model, which allowed a quantitative analysis of the data in terms of the average velocity of electrons and holes. The fitting of the data yielded a saturation of the electron and hole velocity of v _e = 2.3 × 10⁷ cm/s and v _h = 1.0 × 10⁷ cm/s at electric fields E > 1.5 kV/cm. The increase in rise time at high bias is consistent with the results of Monte Carlo simulations and can be partly explained by a reduction of the electron saturation velocity due to frequent impact ionization. Finally, the model was used to predict the bandwidth in diodes with shorter RC = 5 ps, giving BW = 16 GHz and BW = 21 GHz for x _j = 4 μm and x _j = 2 μm, respectively, for a gain of M = 100.     

Kinetic and mechanistic investigations of progesterone reaction with ozone

The removal of progesterone by ozone in aqueous solution was studied in this work. The absolute rate constant was evaluated and first by-products were identified. The reaction was studied in the 2.0-8.0 pH range and was found to be a second-order reaction, first-order relative to each compound concentration. The rate constant, determined by kinetic experiments in presence of an OH radical scavenger (tert-butanol), was independent of pH. The value was evaluated to be equal to 480+/-30 M(-1)s(-1) by two kinetic methods. Mass spectrometry analyses were performed to investigate primary degradation products generated by the reaction of ozone with progesterone. Two by-products were evidenced. According to these results, a degradation pathway of progesterone reacting with ozone was proposed.     

Influence of plastic deformation in flexible pad laser shock forming – experimental and numerical analysis

Flexible Pad Laser Shock Forming (FPLSF) is a new microforming process using laser-induced shock pressure and a hyperelastic flexible pad to induce high strain-rate (~10⁵ s^?1) plastic deformation on metallic foils to produce 3D microcraters. This paper studies the effect of two significant process parameters of FPLSF, flexible pad material and its thickness, on the deformation characteristics of the metal foils using experiments and finite element analysis. A finite element model is developed to simulate the FPLSF process. The stress-strain distribution across the foil and the flexible pad at different process stages of FPLSF are studied using FE analysis. Flexible pad materials including silicone rubber, polyurethane rubber, and natural rubber with thicknesses ranging between 300 μm and 3000 μm have been investigated in detail. Experimental results highlight that both the hardness and thickness of the flexible pad significantly influence the deformed crater geometry, thickness distribution across the formed crater and surface hardness at the crater surfaces. The experimental results are correlated with the stress-strain distributions from finite element analysis to study the underlying behaviors.     

Fluctuating renewables in a long-term climate change mitigation strategy

Integrated Assessment models, widely applied in climate change mitigation research, show that renewable energy sources (RES) play an important role in the decarbonization of the electricity sector. However, the representation of relevant technologies in those models is highly stylized, thereby omitting important information about the variability of electricity demand and renewables supply. We present a power system model combining long time scales of climate change mitigation and power system investments with short-term fluctuations of RES. Investigating the influence of increasingly high temporal resolution on the optimal technology mix yields two major findings: the amount of flexible natural gas technologies for electricity generation rises while the share of wind energy only depends on climate policy constraints. Furthermore, overall power system costs increase as temporal resolution is refined in the model, while mitigation costs remain unaffected.     

Improving the transfer of near infrared prediction models by orthogonal methods

Eight calibration transfer methods based on the removal of orthogonal signal were compared for the standardization of whole soybean protein and oil models. Dynamic orthogonal projection (DOP), transfer by orthogonal projection (TOP), error removal by orthogonal subtraction (EROS), orthogonal signal correction (OSC), and orthogonal projections to latent structures (O-PLS) as well as the modification and extension of some of these methods were compared in the transfer of models in intra and inter-brand situations using two Foss Infratecs and two Bruins OmegAnalyzerGs. For each brand, a master was designated and its models transferred onto the second unit of its network and the two units of the second brand. Calibration models were transferable from brand to brand with similar or better precision than when each instrument was calibrated on its own calibration set (for Infratec 1229, the relative predictive determinant (RPD) increased in intra and inter-brand calibration transfer situations from 10.42 to 11.45 and 10.57, with DOP and EROS respectively). Performance of each method was different across parameters, instruments, and validation sets. DOP modifications on the determination of the difference matrix showed promising results while TOP and EROS extensions to include variability specifically present in certain crop years did not bring any beneficial effects.     

Antibacterial activity of peptides extracted from tryptic hydrolyzate of whey protein by nanofiltration

Ultrafiltration permeate of whey protein tryptic hydrolyzate was processed by nanofiltration (NF) to obtain retentate (NFR) and permeate (NFP) that were then tested as inhibitors of Listeria, Staphylococcus aureus and Escherichia coli. NFR at 20 mg mL^?1 was most effective as an inhibitor (P < 0.001); whereas E. coli was relatively resistant, the effect on Listeria and S. aureus was greater at 20 mg mL^?1 than at 10 mg mL^?1 (P < 0.01). Peptide analysis revealed that NFR was rich in anionic peptides over eight amino acid residues in length. The antibacterial activity of two anionic peptides (84–91 and 125–135) and a cationic peptide (36–42) derived from β-lactoglobulin was tested. Peptide 125–135 was more inhibitory (P < 0.05) than peptide 84–91 against Listeria monocytogenes and S. aureus; peptide 36–42 was not inhibitory. NFR appears to have potential as a natural bio-preservative.