Polyurethane Composites Reinforced with Walnut Shell Filler Treated with Perlite,Montmorillonite and Halloysite

In the following study, polyurethane (PUR) composites were modified with 2 wt.% of walnut shell filler modified with selected mineral compounds–perlite, montmorillonite, and halloysite. The impact of modified walnut shell fillers on selected properties of PUR composites, such as rheological properties (dynamic viscosity, foaming behavior), mechanical properties (compressive strength, flexural strength, impact strength), dynamic-mechanical behavior (glass transition temperature, storage modulus), insulation properties (thermal conductivity), thermal characteristic (temperature of thermal decomposition stages), and flame retardant properties (e.g., ignition time, limiting oxygen index, heat peak release) was investigated. Among all modified types of PUR composites, the greatest improvement was observed for PUR composites filled with walnut shell filler functionalized with halloysite. For example, on the addition of such modified walnut shell filler, the compressive strength was enhanced by ~13%, flexural strength by ~12%, and impact strength by ~14%. Due to the functionalization of walnut shell filler with thermally stable flame retardant compounds, such modified PUR composites were characterized by higher temperatures of thermal decomposition. Most importantly, PUR composites filled with flame retardant compounds exhibited improved flame resistance characteristics-in all cases, the value of peak heat release was reduced by ~12%, while the value of total smoke release was reduced by ~23%.     

Pectobacterium parmentieri SCC 3193 Mutants with Altered Synthesis of Cell Surface Polysaccharides Are Resistant to N4-Like Lytic Bacteriophage ϕA38 (vB_Ppp_A38) but Express Decreased Virulence in Potato (Solanum tuberosum L.) Plants

Pectobacterium parmentieri is a Gram-negative plant-pathogenic bacterium able to infect potato (Solanum tuberosum L.). Little is known about lytic bacteriophages infecting P. parmentieri and how phage-resistance influences the environmental fitness and virulence of this species. A lytic phage vB_Ppp_A38 (ϕA38) has been previously isolated and characterized as a potential biological control agent for the management of P. parmentieri. In this study, seven P. parmentieri SCC 3193 Tn5 mutants were identified that exhibited resistance to infection caused by vB_Ppp_A38 (ϕA38). The genes disrupted in these seven mutants encoded proteins involved in the assembly of O-antigen, sugar metabolism, and the production of bacterial capsule exopolysaccharides. The potential of A38-resistant P. parmentieri mutants for plant colonization and pathogenicity as well as other phenotypes expected to contribute to the ecological fitness of P. parmentieri, including growth rate, use of carbon and nitrogen sources, production of pectinolytic enzymes, proteases, cellulases, and siderophores, swimming and swarming motility, presence of capsule and flagella as well as the ability to form biofilm were assessed. Compared to the wild-type P. parmentieri strain, all phage-resistant mutants exhibited a reduced ability to colonize and to cause symptoms in growing potato (S. tuberosum L.) plants. The implications of bacteriophage resistance on the ecological fitness of P. parmentieri are discussed.     

Examining the Impact of Squaric Acid as a Crosslinking Agent on the Properties of Chitosan-Based Films

Hydrogels based on chitosan are very versatile materials which can be used for tissue engineering as well as in controlled drug delivery systems. One of the methods for obtaining a chitosan-based hydrogel is crosslinking by applying different components. The objective of the present study was to obtain a series of new crosslinked chitosan-based films by means of solvent casting method. Squaric acid—3,4-dihydroxy-3-cyclobutene-1,2-dione—was used as a safe crosslinking agent. The effect of the squaric acid on the structural, mechanical, thermal, and swelling properties of the formed films was determined. It was established that the addition of the squaric acid significantly improved Young’s modulus, tensile strength, and thermal stability of the obtained materials. Moreover, it should be stressed that the samples consisting of chitosan and squaric acid were characterized by a higher swelling than pure chitosan. The detailed characterization proved that squaric acid could be used as a new effective crosslinking agent.     

Role of miRNA in Melanoma Development and Progression

Melanoma is one of the most aggressive and progressive skin cancers. It develops from normal pigment-producing cells known as melanocytes, so it is important to know the mechanism behind such transformations. The study of metastasis mechanisms is crucial for a better understanding the biology of neoplastic cells. Metastasis of melanoma, or any type of cancer, is a multi-stage process in which the neoplastic cells leave the primary tumour, travel through the blood and/or lymphatic vessels, settle in distant organs and create secondary tumours. MicroRNA (miRNA) can participate in several steps of the metastatic process. This review presents the role of miRNA molecules in the development and progression as well as the immune response to melanoma.     

Integration of photocatalysis and membrane distillation for removal of mono- and poly-azo dyes from water

The paper reports investigations on the application of anatase-phase TiO₂ for the removal of azo dyes in a hybrid system coupling photocatalysis with direct contact membrane distillation (DCMD, MD). The process was conducted in a laboratory-scale installation equipped with a PP capillary module. The influence of reaction temperature and initial concentration of azo dyes on the effectiveness of their photodegradation was especially investigated. Two mono-azo dyes: Acid Red 18 (AR18) and Acid Yellow 36 (AY36) and one poly-azo dye, Direct Green 99 (DG99) were applied as model compounds. The increase of the reaction temperature from 313 to 333 K resulted in an improvement of the efficiency of photodecomposition of the dyes, as was found on the basis of changes of their masses in the feed solution. The comparison of the results obtained during photocatalysis alone and hybrid photocatalysis-MD process revealed that the reduction of feed volume in MD did not affect the photodegradation rate of the azo dyes. An improvement of the effectiveness of the degradation of dyes was obtained by an application of solutions with lower initial concentration (10 instead of 30 mg/dm³). Regardless of the process parameters applied, the product (distillate) was almost pure water with conductivity lower than 0.3 mS/m and pH above 5.2.     

The Obscure Effect of Tribulus terrestris Saponins Plus Inulin on Liver Morphology,Liver Fatty Acids,Plasma Glucose,and Lipid Profile in SD Rats with and without Induced Type 2 Diabetes Mellitus

Diabetes is a predictor of nonalcoholic fatty liver disease (NAFLD). There are data suggesting that Tribulus terrestris (TT) saponins act as antidiabetic agents and protect against NAFLD. The effect of saponins may be increased by fermentable fibers such as inulin. The aim of the present study was to investigate the influence of TT saponins and TT saponins plus inulin on the plasma lipid profile and liver fatty acids of rats with induced diabetes mellitus type 2 (T2DM). The study was performed on 36 male Sprague–Dawley rats divided into two main groups: control and diabetic. Animals of the diabetic (DM) group were fed a high-fat diet and injected with streptozotocin (low doses). Animals of the control group (nDM) were on a regular diet and were injected with buffer. After the injections, the animals were split into subgroups: three non-diabetic (nDM): (i) control (c-C); (ii) saponin-treated rats (C-Sap); (iii) rats treated with saponins + inulin (C-Sap + IN), and three diabetic subgroups (DM): (iv) control (c-DM); (v) saponin-treated rats (DM-Sap); (vi) rats treated with saponins + inulin (DM-Sap + IN). Liver fatty acids were extracted and analyzed by gas chromatography, and plasma glucose and lipids were measured. The study showed significant changes in liver morphology, liver fatty acids, plasma lipid profile, and plasma glucose. In summary, supplementation with TT saponins or saponins with inulin for one month decreased the level of steatosis in rats with induced type 2 diabetes. Moreover, there were favorable effects on the plasma lipid profile in the rats. However, additional supplementation with inulin had a negative effect on liver morphology (with a microvesicular type of steatosis) in the non-diabetes group. Moreover, supplementation with inulin had a negative effect on plasma glucose in both diabetic and non-diabetic rats. These data show that a diet enriched with fermentable fibers reveals different effects in different organisms, and not all sources and forms of fiber are beneficial to health.     

Combining preventive replacement and burn‐in procedures

This paper considers a non‐homogeneous population of items. Most of the items fail due to a wear‐out process. Therefore it is reasonable to employ a procedure of preventive maintenance. Some items, however, are of short life due to intrinsic defects. When used as replacement parts they may spoil results of planned prevention. The paper seeks for equilibrium of burn‐in and preventive replacement periods. Copyright © 2002 John Wiley & Sons, Ltd.     

Allergen arrays for antibody screening and immune cell activation profiling generated by parallel lipid dip-pen nanolithography

Multiple-allergen testing for high throughput and high sensitivity requires the development of miniaturized immunoassays that allow for a large test area and require only a small volume of the test analyte, which is often available only in limited amounts. Developing such miniaturized biochips containing arrays of test allergens needs application of a technique able to deposit molecules at high resolution and speed while preserving its functionality. Lipid dip-pen nanolithography (L-DPN) is an ideal technique to create such biologically active surfaces, and it has already been successfully applied for the direct, nanoscale deposition of functional proteins, as well as for the fabrication of biochemical templates for selective adsorption. The work presented here shows the application of L-DPN for the generation of arrays of the ligand 2,4-dinitrophenyl[1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-[6-[(2,4-dinitrophenyl)amino]hexanoyl] (DNP)] onto glass surfaces as a model system for detection of allergen-specific Immunoglobin E (IgE) antibodies and for mast cell activation profiling.