Development of the Method for Nusinersen and Its Metabolites Identification in the Serum Samples of Children Treated with Spinraza for Spinal Muscular Atrophy

The application of oligonucleotides as drugs for different genetic diseases is increasing rapidly. Since 2016 they are used during spinal muscular atrophy treatment with the use of nusinersen oligonucleotide. The purpose of this study was to improve methods for the analysis of serum samples of patients treated with nusinersen. The results showed that liquid-liquid extraction (with phenol/chloroform) is insufficient and an additional purification step using solid-phase extraction is necessary. The best results were obtained for microextraction by packed sorbents. Important parameters in the optimization of the method were mainly the type of amine in the mobile phase and the stationary phase. Both influenced the selectivity of metabolite separation and thus their correct identification; while amine type impacted also the intensity of signals. Finally, the highest resolution of separation and the highest peak areas were obtained for N,N-dimethylbutylamine or N,N-diisopropylthylamine with an octadecyl column with a terminal aryl group. Over a dozen of metabolites were successfully identified with the use of methods developed during the study. The 3′ exonucleases and 5′ exonucleases were mainly responsible for nusinersen metabolism, consequently, 3′end shortmers, and 5′end shortmers were observed, as well as metabolites with simultaneous loss of bases at both ends of the sequence. However, some depurination and depyrimidination products were also identified. To the best of our knowledge, this is the first report on nusinersen and its metabolite identification in serum samples by liquid chromatography and mass spectrometry.     

Effects of Various Disinfection Methods on the Material Properties of Silicone Dental Impressions of Different Types and Viscosities

There is an ongoing search for novel disinfection techniques that are not only effective, cheap, and convenient, but that also do not have adverse effects on the properties of dental impressions. We compared the effects of various methods (UVC, gaseous ozone, commercial solution, and spray) on the dimensional change, tensile strength, and hardness of silicone impressions. Moreover, as a secondary aim, we performed a statistical comparison of the properties of nondisinfected addition (Panasil Putty Soft, Panasil monophase Medium, Panasil initial contact Light) and condensation silicones (Zetaplus Putty and Oranwash L), as well as a comparison of materials of various viscosities (putty, medium-bodied, and light-bodied). Our results revealed that addition silicones had higher dimensional stability, tensile strength, and Shore A hardness compared to condensation silicones. Both traditional (immersion and spraying) and alternative methods of disinfection (UVC and ozone) had no significant impact on the tensile properties and dimensional stability of the studied silicones; however, they significantly affected the hardness, particularly of Oranwash L. Our study demonstrated that, similarly to standard liquid disinfectants, both UVC and ozone do not strongly affect the material properties of most silicones. However, before recommendation, their usefulness for each individual material should be thoroughly evaluated.     

The Effects of Genistein at Different Concentrations on MCF-7 Breast Cancer Cells and BJ Dermal Fibroblasts

This study aimed to evaluate the safety and potential use of soy isoflavones in the treatment of skin problems, difficult-to-heal wounds and postoperative scars in women after the oncological treatment of breast cancer. The effects of different concentrations of genistein as a representative of soy isoflavonoids on MCF-7 tumor cells and BJ skin fibroblasts cultured in vitro were assessed. Genistein affects both healthy dermal BJ fibroblasts and cancerous MCF-7 cells. The effect of the tested isoflavonoid is closely related to its concentration. High concentrations of genistein destroy MCF-7 cancer cells, regardless of the exposure time, with a much greater effect on reducing cancer cell numbers at longer times (48 h). Lower concentrations of genistein (10 and 20 μM) increase the abundance of dermal fibroblasts. However, higher concentrations of genistein (50 μM and higher) are detrimental to fibroblasts at longer exposure times (48 h). Our studies indicate that although genistein shows high potential for use in the treatment of skin problems, wounds and surgical scars in women during and after breast cancer treatment, it is not completely safe. Introducing isoflavonoids to treatment requires further research into their mechanisms of action at the molecular level, taking into account genetic and immunological aspects. It is also necessary to conduct research in in vivo models, which will allow for eliminating adverse side effects of therapy.     

Determination of Iron Species in Samples of Iron-Fortified Food

The paper presents the determination of iron forms in food products. The procedure of sample extraction was developed and optimized, preserving the content of particular forms of iron. The colorimetric method using 2,2′-bipirydyl (measurements at 520 nm) was applied in Fe(II) determinations, while in Fe(III) determinations, the colorimetric method with potassium thiocyanate (measurements at 470 nm) was applied. The total content of iron was determined by the technique of atomic absorption spectrometry, which allowed for the determination of iron content in organic and inorganic complex compounds. Detection limits of 1 mg kg^?1 were obtained for all determined iron forms, with the precision ranging between 0.7 % and 1.5 % for 10 mg kg^?1 concentration. The optimized analytical procedure was applied in the determinations of iron forms in iron-fortified food products.     

Hydrogen production by steam reforming of ethanol over Co/CeO2 catalysts: Effect of cobalt content

The Co/CeO₂ catalysts obtained by co-precipitation method were used in the steam reforming of ethanol (SRE). The influence of cobalt active phase content (15–29 wt%), the reaction temperature (420–600 °C) and H₂O/EtOH molar ratio (12/1 and 6/1) were examined. The physicochemical characterization revealed that the cobalt content of the catalyst influences the metal-support interaction which results in catalyst performance in SRE process. The differences between catalytic properties of the Co/CeO₂ catalysts with different metal loading in SRE process decayed at 500 °C for H₂O/EtOH = 12/1. The best performance among the tested catalysts showed the 29Co/CeO₂ catalyst with the highest cobalt content, exhibiting the highest ethanol conversion, selectivity to two most desirable products and the lowest selectivity to by-products in comparison with catalysts containing smaller amount of metal. Its catalytic properties results probably from its unique physicochemical properties, i.e this catalyst contains large amount of cobalt but the metal crystallites are relatively small. Regardless cobalt content, an increase in the water-to-ethanol molar ratio in the feed increased the concentration of hydrogen an carbon dioxide and decreased formation of carbon monoxide, acetone, aldehyde and ethylene.     

The preparation of TiO2–nitrogen doped by calcination of TiO2·xH2O under ammonia atmosphere for visible light photocatalysis

The investigation on incorporating nitrogen group into titanium dioxide in order to obtain powdered visible light-active photocatalysts is presented. The industrial hydrated amorphous titanium dioxide (TiO₂·xH₂O) obtained directly from sulphate technology installation was modified by heat treatment at temperatures of 100–800 °C for 4 h in an ammonia atmosphere. The photocatalysts were characterized by UV–VIS–DR and XRD techniques. The UV–VIS–DR spectra of the modified catalysts exhibited an additional maximum in the VIS region (, ) which may be due to the presence of nitrogen in TiO₂ structure. On the basis of XRD analysis it can be supposed that the presence of nitrogen does not have any influence on the transformation temperature of anatase to rutile. The photocatalytic activity of the modified photocatalysts was determined on the basis of decomposition rate of phenol and azo-dye (Reactive Red 198) under visible light irradiation. The highest rate of phenol degradation was obtained for catalysts calcinated at 700 °C (6.55%), and the highest rate of dye decomposition was found for catalysts calcinated at 500 and 600 °C (ca. 40–45%). The nitrogen doping during calcination under ammonia atmosphere is a very promising way of preparation of photocatalysts which could have a practical application in water treatment system under broader solar light spectrum.     

3D Nanolithography by Means of Lipid Ink Spreading Inhibition

While patterning 2D metallic nanostructures are well established through different techniques, 3D printing still constitutes a major bottleneck on the way to device miniaturization. In this work a fluid phase phospholipid ink is used as a building block for structuring with dip-pen nanolithography. Following a bioinspired approach that relies on ink-spreading inhibition, two processes are presented to build 2D and 3D metallic structures. Serum albumin, a widely used protein with an innate capability to bind to lipids, is the key in both processes. Covering the sample surface with it prior to lipid writing, anchors lipids on the substrate, which ultimately allows the creation of highly stable 3D lipid-based scaffolds to build metallic structures.