Effect of gamma radiolysis on pit initiation of zircaloy-2 in water containing sea salt

In spent fuel pools at the Fukushima Daiichi Nuclear Power Station (1F), seawater was injected for cooling purposes after the tsunami disaster in March 2011. It is well known that the chloride in the seawater has the potential to cause localized corrosion (e.g., pitting corrosion) in metals. In this study, we evaluated the pitting potentials of zircaloy-2, the material used in the fuel cladding tubes in 1F, as a function of chloride concentration. To accomplish this, we used artificial seawater under gamma-ray irradiation and investigated the effect of radiolysis on pit initiation of zircaloy-2 in water containing sea salt. Changes in the composition of water containing sea salt were analyzed as well, both before and after gamma-ray irradiation. The characteristics of the resultant oxide films formed on zircaloy-2 were evaluated by X-ray photoelectron spectroscopy and electrochemical impedance spectroscopy. The experimental results showed that the pitting potential under irradiation was slightly higher than that under conditions in which no radiation was present, and that the pitting potential decreased with increasing chloride concentration in the presence as well as the absence of radiation. Solution analyses for water containing sea salt showed that hydrogen peroxide was generated by irradiation. The oxide film was composed of zirconium oxide and was made thicker during the irradiation. The higher pitting potential could thus be explained by the capacity of hydrogen peroxide to oxidize the surface and enhance oxide film formation. Under gamma-ray irradiation, the zircaloy-2 surface with an oxide film formed by radiolysis products was found to be resistant to pitting in the presence of chloride.     

Examination of pin-by-pin fission rate distribution in large geometry evaluated by the Monte-Carlo method

Accuracy and reliability of pin-by-pin fission rate distribution in large geometries calculated by the multi-group Monte-Carlo method is examined through comparison with a deterministic transport code based on the method of characteristics. Various calculation geometries from a single assembly to a PWR full core are used for comparison of pin-by-pin fission rate distribution. An integral parameter, i.e., k-effective, can be accurately calculated by the Monte-Carlo method with a practical number of neutron histories (10⁶–10⁷) regardless of the size of the calculation geometry. On the other hand, comparison with the deterministic calculation shows that the estimated statistical errors for pin-by-pin fission rate distribution obtained by a Monte-Carlo calculation are somewhat underestimated in a large geometry, e.g., a PWR full core, under the present calculation conditions. Such underestimation of the statistical uncertainty of a local parameter should be carefully considered when the Monte-Carlo method is used as a reference tool for verification of a deterministic code, especially in large geometries.     

Motion control of underactuated linkage robot based on gymnastic skill

In this paper, a reproduction of a swing‐up and a giant swing motion of underactuated robots based on technique of the horizontal bar gymnast is discussed with focusing on an equivalent center of mass (ECM) of underactuated robots and the gymnast. At first, the behaviors of the ECM of the gymnast (ECMG) are analyzed by using a motion capturing technique and an efficient motion of the ECMG for the swing‐up and for the giant swing motion are identified from analysis results, respectively. Next, a partial linearization method, which can realize that the ECM of the Acrobot (ECMA) replicates this efficient motion, is designed and reproduces the underactuated robots the swing‐up and giant swing motion like the gymnast. Finally, an effectiveness of the proposed controller is shown by numerical simulations.     

Contribution of metal vapor mass at periphery part of pulsed arc to electromagnetic force in weld pool

The arc welding has been used in various welding methods because it is inexpensive and high in strength after welding. However, it is a problem that accidents such as collapse of the bridge occur because of the welding defects. The welding of low cost and high productivity is required without the welding defects. The pulsed TIG welding is inexpensive and capable of high‐quality welding. The electromagnetic force contributing to penetration changes because the transient response of arc temperature and iron vapor generated from anode occurs. However, the analysis of pulsed TIG welding with metal vapor has been elucidated only metal vapor concentration near anode with transient phenomenon and heat flux. Thus, the theoretical elucidation of penetration depth with control factor has not been researched. In this paper, the contribution of metal vapor mass at the periphery part of pulsed arc to the electromagnetic force in the weld pool is elucidated. As a result, the iron vapor mass at periphery part decreased with increasing the frequency. The iron vapor was stagnated at axial center within one cycle. The electromagnetic force to the penetration depth direction in weld pool increased at axial center. Therefore, the metal vapor mass at periphery part plays an important role for the electromagnetic force increment at axial center.     

Reduced‐order method for mathematical modeling of multiphase dc‐dc converter

A multiphase dc‐dc converter is effective for miniaturization and achieving high‐power density in a switching power supply. However, its mathematical modeling becomes complex as the phase number of the circuit increases. This study proposes a new modeling method to derive a reduced‐order method in a simple manner. The frequency characteristics of the reduced‐order model are fit to those of the original mathematical model of the multiphase dc‐dc converter. Therefore, the efficacy of the proposed method is validated.     

The effects of freezing and thawing on the survival of Escherichia coli O157:H7 in apple juice

Unpasteurized apple juice, adjusted to pH 3.6 to 7.0 was inoculated (10(7) CFU/ml) with single strains of E. coli O157:H7 to evaluate the effect of frozen storage on the viability of this organism. Samples were stored under frozen conditions (-20+/-2 degrees C) for up to 16 days. Cell populations were determined at regular intervals by plating onto tryptic soy agar with added pyruvate (TSAP) or onto sorbitol MacConkey agar (SMA). Populations in the neutralized juice remained unchanged during frozen storage. Populations in non-neutralized juice decreased by 1-3 log10 CFU/ml depending on the strain tested and the pH of the juice. The greatest population decrease was observed with the first freeze/thaw cycle of frozen storage (24 h) and a slow decline in survival occurred thereafter. Injury was observed after 2 weeks of storage when juice pH was at or below pH 4.2. When samples were subjected to multiple freeze/thaw cycles, loss of viability and injury increased with each freeze/thaw cycle.     

Visualizing vitreous using quantum dots as imaging agents

Vitreous is transparent tissue located between the lens and the retina of the eye, thus, difficult to look at by even ophthalmological microscope. But vitreous is connected with some sight-threatening eye diseases, for example, retinal detachment, macular hole, epi-retinal membrane, and so forth. Quantum dots (QDs) have been applied to a wide range of biological studies by taking advantage of their fluorescence properties. We established a novel technique of aqueous colloidal QD (ACQD) as a vitreous lesion detector. When compared with some conventional dyes used for clinical situation, i.e. fluorescein, indocyanine green, and triamcinolone acetonide, ACQD exerted a higher performance to detect a Weiss Ring. Furthermore ACQD is also effective to perform vitrectomy, an eye surgery to cut and eliminate vitreous. Some functional structures in vitreous are detected clearly when ACQD was injected into an enucleated porcine eye. We demonstrated that ACQD enabled any ophthalmic surgeon to perform vitrectomy reliably, easily, and more safely. Taken together, the ACQD-oriented vitreous staining system will promote ophthalmological science, and it will raise the cure rate of eye diseases     

12300 ps/nm, 2.4 Gb/s nonregenerative optical fiber transmissionexperiment and effect of transmitter phase noise

A nonregenerative optical transmission experiment with a chromatic dispersion of more than 10000 ps/nm is reported. Externally intensity-modulated 2.4 Gb/s optical signals were transmitted over 710 km of nondispersion-shifted optical fiber using ten Er-doped fiber amplifiers with a total net optical gain of 125 dB. Although the total chromatic dispersion amounted to 12300 ps/nm, the power penalty observed was as small as 0.5 dB, and an error floor was not observed. The effect of transmitter phase noise associated with fiber chromatic dispersion was experimentally investigated     

Acceptor recognition of kojibiose phosphorylase from Thermoanaerobacter brockii: syntheses of glycosyl glycerol and myo-inositol

The glucosyl transfer reaction of kojibiose phosphorylase (KP; EC 2.4.1.230) was examined using glycerol or myo-inositol as an acceptor. In the case of glycerol, KP produced two main transfer products: saccharides A and B. The structure of saccharide A was O-alpha-D-glucopyranosyl-(1-->1)-glycerol and that of saccharide B was O-alpha-D-glucopyranosyl-(1-->2)-O-alpha-D-glucopyranosyl-(1-->1)-glycerol. These results show that KP transferred a glucose residue to the hydroxyl group at position 1 of glycerol. On the other hand, when myo-inositol was used as an acceptor, KP produced four transfer products: saccharides 1-4. The structures of saccharides 1 and 2 were O-alpha-D-glucopyranosyl-(1-->1)- and O-alpha-D-glucopyranosyl-(1-->5)-myo-inositol, respectively; those of saccharides 3 and 4 were O-alpha-D-glucopyranosyl-(1-->2)-O-alpha-D-glucopyranosyl-(1-->1)- and O-alpha-D-glucopyranosyl-(1-->2)-O-alpha-D-glucopyranosyl-(1-->5)-myo-inositol, respectively. KP transferred a glucose residue to the hydroxyl group at position 1 or 5 of myo-inositol. On the basis of the structures of their glucosyl transfer products, glycerol and myo-inositol were found to have a common structure with three hydroxyl groups corresponding to the hydroxyl group of the glucose molecule at positions 2, 3 and 4. The conformation of these three hydroxyl groups in the structure is equatorial. This structure is the substrate recognition site of KP. It has been suggested that KP strictly recognizes the structures of glycerol and myo-inositol, and catalyzes the transfer reaction of a glucose residue to the hydroxyl group at position 1 in glycerol, and at position 1 or 5 in myo-inositol, corresponding to position 2 in glucose.