Study of a fuel cell network with water electrolysis for improving partial load efficiency of a residential cogeneration system

A fuel cell energy network which connects hydrogen and oxygen gas pipes, electric power lines and exhaust heat output lines of the fuel cell cogeneration for individual houses, respectively, is analysed. As an analysis case, the energy demand patterns of individual houses in Tokyo are used, and the analysis method for minimization of the operational cost using a genetic algorithm is described. The fuel cell network system of an analysis example assumed connecting the fuel cell cogeneration of five houses. If energy is supplied to the five houses using the fuel cell energy network proposed in this paper, 9% of city gas consumption will be reduced by the maximum from the results of analysis. Two per cent included with 9% is an effect of introducing water electrolysis operation of the fuel cells, corresponding to partial load operation of fuel cell cogeneration. Copyright © 2005 John Wiley & Sons, Ltd.     

Observation of Laminar and Turbulent Flow in Superfluid 4He using a Vibrating Wire

No Heading We have investigated the laminar and the turbulent flow in superfluid ⁴He using a vibrating wire made of thin NbTi ( 2.5 m). The wire velocity as a function of applied force has shown a large hysteresis at the first cooling from normal fluid to the superfluid state. But after a couple of increasing and decreasing wire velocity we have found that the hysteresis vanished and the laminar and the turbulent flow are clearly separated at a critical velocity. The wire moving just after the first cooling must be influenced by remnant vortices nucleated through the superfluid transition. The appearance of the laminar flow below the critical velocity suggests that vortex strings on the wire seem to be selected as suitable sizes by a vibrating flow at higher velocities. We also measured the velocity dependence after immersing the wire directly into the superfluid and found that the laminar region expands up to a velocity much higher than the critical velocity observed above. This result indicates that remnant vortices are considerably reduced by the immersing method.PACS numbers: 67.40.Vs, 47.27.Cn     

Theoretical analysis of electron-beam-excited KrF laser performance: New F2concentration optimization

For an electron-beam-excited KrF laser, we analyzed theoretically the dependence of the performance characteristics on the excitation rate and initial F2concentration. According to the analysis of KrF* formation processes, KrF* relaxation processes, 248 nm absorption processes, and their individual efficiencies, a novel optimization method for initial F2concentrations is necessary instead of a conventional method of a "constant" F2burn-up rate. Then, we determined optimum F2concentration as a function of the excitation rate for excitation pulses of 20-500 ns FWHM. Finally, we obtained the scaling law for the intrinsic KrF laser efficiency.     

Theoretical simulation of electron-beam-excited xenon-chloride (XeCl) lasers

By developing a comprehensive computer code fore-beam excited XeCl lasers, we studied mainly the effect of Ar and Ne diluents on the performance characteristics of XeCl lasers. According to the analysis of the XeCl* formation process, the XeCl* relaxation process, and the 308 nm absorption process, it is found that the XeCl* formation efficiency is determined mainly by the rate of the charge transfer process (from Ar+ and Ne+ diluent ions to Xe+); in other words, by the difference between ionic potentials of Xe and the diluent gas used. The extraction efficiency is found to be decided mainly by the quenching rate of a three-body reaction for a short-pulse (55 ns) and a high-excitation-rate (∼ 3 MW/cm³) pumping, and by the absorption process for a long-pulse (500 ns) and a low-excitation-rate (∼ 0.2 MW/cm³) pumping. However, note that no appreciable difference in the intrinsic efficiency is found between the Ar/Xe/HCl and Ne/Xe/HCl mixtures. We also analyzed the dependence of the intrinsic XeCl laser efficiency on the pumping pulse width and excitation rate for Ar/Xe/HCl and Ne/Xe/HCl mixtures. As a result, the same intrinsic efficiencies are obtainable for both Ar- and Ne-based mixtures although the optimum operating conditions are slightly different. The maximum intrinsic efficiency of 5 percent is obtainable both for the Ar/Xe/HCl mixture at 3 atm and with 1.5 MW/cm³, 200 ns (FWHM) pumping and for the Ne/Xe/HCl mixture at 4 atm and with 2 MW/cm³, 200 ns (FWHM) pumping.     

A TV Ghost Canceller Using a CCD Transversal Filter

A system study has been conducted on a transversal filter ghost canceller to achieve system optimization, and an LSI CCD transversal filter for use in the ghost canceller was developed. Furthermore, a practical model of the ghost canceller was constructed on a trial basis. The results of field tests made on the test equipment showed that this system could improve TV picture quality by more than one grade in a five grade subjective evaluation and that the ghost canceller would be useful in practical applications.     

Development and testing of analytical models for the pebble bed type HTRs

The pebble bed type gas cooled high temperature reactor (HTR) appears to be a good candidate for the next generation nuclear reactor technology. These reactors have unique characteristics in terms of the randomness in geometry, and require special techniques to analyze their systems. This study includes activities concerning the testing of computational tools and the qualification of models. Indeed, it is essential that the validated analytical tools be available to the research community. From this viewpoint codes like MCNP, ORIGEN and RELAP5, which have been used in nuclear industry for many years, are selected to identify and develop new capabilities needed to support HTR analysis. The geometrical model of the full reactor is obtained by using lattice and universe facilities provided by MCNP. The coupled MCNP-ORIGEN code is used to estimate the burnup and the refuelling scheme. Results obtained from Monte Carlo analysis are interfaced with RELAP5 to analyze the thermal hydraulics and safety characteristics of the reactor. New models and methodologies are developed for several past and present experimental and prototypical facilities that were based on HTR pebble bed concepts. The calculated results are compared with available experimental data and theoretical evaluations showing very good agreement. The ultimate goal of the validation of the computer codes for pebble bed HTR applications is to acquire and reinforce the capability of these general purpose computer codes for performing HTR core design and optimization studies.     

In vitro differentiation of a cloned bovine mammary epithelial cell

The aim of the study was to establish in vitro a bovine mammary epithelial cell (MEC) clone, able to respond to mitogenic growth factors and to lactogenic hormones. Mammary tissue from a 200-d pregnant Holstein cow was used as a source of MEC, from which a clone was established through a process of limiting dilution. When plated on plastic, the cells assumed a monolayer, cobblestone, epithelial-like morphology, with close contact between cells. Inclusion of IGF-1 and EGF in the media significantly increased the number of cells 5 d after plating. All cells stained strongly for cytokeratin and moderately for vimentin at young and old passage stages, indicating the epithelial nature of this cell clone. When the cells were plated at a high density on a thin layer of a commercial extracellular matrix preparation (Matrigel), lobular, alveoli-like structures developed within approximately 5 d, with a clearly visible lumen. When cells were plated onto Matrigel in differentiation media (containing lactogenic hormones), detectable quantities of alpha-casein were present in the media and particularly on the lumen side of the structures. Omission of one of the lactogenic hormones (insulin, prolactin or hydrocortisone) reduced alpha-casein release to the limit of detection of the assay used. Lactoferrin was also produced when the cells were plated on Matrigel, again principally on the lumen side of the lobules, though this was independent of the lactogenic hormones. By passage 40, the cells had senesced, and it was not possible to induce alpha-casein or lactoferrin production. This study notes the establishment of a functional bovine mammary epithelial cell clone, which is responsive to mitogenic and lactogenic hormones and an extracellular matrix.