Effect of chromium content on remarkably rapid nitriding in austenitic Fe-Ni-Cr alloys

Remarkably rapid nitriding which is independent of diffusion theory based on the thermal activation process, was observed during nitriding of austenitic Fe-Ni-Cr steels containing 16 and 19 mass% chromium. Increase of the chromium content in the alloys yielded increasing thickness of the nitrided layer, i.e. the internal nitriding theory did not hold in the nitriding. No rapid nitriding was observed in steels containing less than 13 mass% chromium. Hence the limiting concentration of chromium for the rapid nitriding will lie between 13 and 16 mass% chromium. A solution to the problem of abnormalities arising during nitriding of practical austenitic stainless steels which have been investigated since 1972, has been presented experimentally by nitriding various chromium-containing steels. Based on the experimental results, the origin of the rapid nitriding is discussed in connection with the free-energy function of Cr₂N and CrN to temperature. In particular, a plateau of nitrogen concentration measured in the nitrided layers leads to the conclusion that a forced nitrogen diffusion in the layer resulted in the rapid nitriding.     

Nickel- and copper-coated carbon fibre reinforced tin-lead alloy composites

Nickel and copper were deposited over brominated, surface treated, and pristine P-100 carbon fibres using cementation and electroplating techniques. The fibres were brominated by bromine vapour for 48 h and then desorbed at 200 °C in air for 12 h. The anodic oxidation treatment of the fibres involved electrochemical etching in a dilute sodium hydroxide electrolyte for 3 min. Electroplated coated fibres showed better tensile properties than cementation coated fibres. In addition, nickel coating exhibited better bonding with the carbon fibres compared to copper coating. The effect of bromination and surface treatment was improved adhesion between coating and fibres. Nickel- and copper-coated fibres, which were brominated, anodically oxidized, and pristine, reinforced tin-lead alloy composites were fabricated by squeeze casting. The composites containing coated treated carbon fibres had higher tensile and shear strength than the ones containing coated pristine carbon fibres. Moreover, the composite with coated brominated carbon fibres had better tensile strength and shear strength than the surface treatment. The results also showed the composites containing nickel-coated fibres had higher tensile and shear strength than the ones containing copper-coated fibres.     

Note on a vertical water-jet emanating downwards from a slit in the air

Summary In this study the critical dimensionless parameters, controlling the alternate 90° turn and oscillation along the axis of a vertical water-jet emanating downwards from a slit in the air are determined.     

Crystallization of glass in fireclay refractories; part III: Detailed study on the mullite crystal size in the ‘synthetic’ glass

Poor-grade fireclay products contain substantial amount of glass. A glass of similar composition was synthesized, nucleated and heat-treated for crystallization of mullite. The size and size-distribution of mullite crystals, the rate of change of size and the aspect ratio of the crystals were investigated in relation to the nucleating agents and temperature.     

METEOR: a constraint-based FIR filter design program

It is proposed to specify a filter only in terms of upper and lower limits on the response, find the shortest filter length which allows these constraints to be met, and then find a filter of that order which is farthest from the upper and lower constraint boundaries in a minimax sense. The simplex algorithm for linear programming is used to find a best linear-phase FIR filter of minimum length, as well as to find the minimum feasible length itself. The simplex algorithm, while much slower than exchange algorithms, also allows the incorporation of more general kinds of constraints, such as concavity constraints (which can be used to achieve very flat magnitude characteristics). Examples are given to illustrate how the proposed and common approaches differ, and how the proposed approach can be used to design filters with flat passbands, filters which meet point constraints, minimum phase filters, and bandpass filters with controlled transition band behavior     

New possibilities of chemical beneficiation of synnirites

Institute of Geology Siberian Branch, Academy of Sciences of the USSR, Novosibirsk. Translated from Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, No. 1, pp. 106–109, January-February, 1992.     

Deposition of carbon films by electrolysis of a water-ethylene glycol solution

An attempt was made to deposit carbon films by electrolysis of a water-ethylene glycol solution. Carbon plate and an n-type silicon substrate were dipped in the solution and a high d.c. potential was negatively applied on the silicon substrate. Some deposits were observed in the region between the boiling point curve and the line approximately 50 °C below and parallel to the boiling point, when electrolysis was carried out at 1 kV for 6 h. For higher potentials of 1.4–2.0 kV and longer electrolysis of 12 h, some samples showed a broad X-ray diffraction peak and Raman peaks, corresponding to graphitic carbon.