单晶高温合金定向凝固过程中初生碳化物的上浮现象SCIEI

本文在一种抗热腐蚀单晶镍基高温合金平面及胞状液-固界面定向凝固条件下,发现了初生碳化物(TiC)的上浮现象并分析了其形成原因。     

Preparation and characterization of high salts polymer electrolyte based on poly（lithium acrylate）

1　INTRODUCTIONWorldwide research and efforts are currentlyunderway to fabricate all solid state, rechargeableLi and Li ion batteries utilizing Li+ conductivepolymer electrolytes[1]. Solid polymer electrolytespossesses many advantages including high ionicconductivity, high specific surface energy, solventfree, wide electrochemical stability windows, lightand easy processability[2]. Apart from polyethy lene oxide ( PEO )[3], poly ( vinyl alcohol )(PAV)[4], …     

Intelligent temperature control system of quench furnace

1　INTRODUCTIONQuenchfurnaceisakindofkeyequipmentusedtoheattreatlargecomplexcomponentsofaircraftsorrockets ,withheightof 2 4m ,containingtwoheatingroomsandaworkroom ,withsteelboardssetbetweentherooms .Bothheatingroomsareseparatedintosixsections ,eachofwhichcontainsaheatingresistancecontrolledbyapoweradjuster .Workpiecesareputinworkroom .Acentrifugalelectromotorisusedtoblowhotairintoworkroomfromheatingroom .Thede mandofalloyintemperature risingrateandstableve racityatfixedtemperaturepointi…     

LabVIEW 7 Express平台上的液压测试系统

为了满足工程实践对先进液压测试技术的需要，研究了基于美国NI公司最新推出的LabVIEW 7 Express虚拟仪器开发平台的液压测试系统的软硬件结构，介绍了测试系统实现网络通讯、数据库链接和多种编程语言联合作业的方法，提出了现代液压测试系统的技术方案。     

合金元素对低合金耐磨铸钢力学性能的影响

研究了低合金耐磨铸钢中台金元素C、Si、Mn、Mo，对钢的力学性能等的影响。结果表明，合金元素的合理有效搭配，可使钢在连续空冷条件下得到贝氏体为主的显微组织：钢中C、Mn含量增加，其硬度上升，冲击韧度下降，其中以Mn影响最大，C次之：Si、Mo对钢性能影响程度较小，均在研究的中等含量处取得性能的最佳值。     

浅议降低脉冲袋式除尘器运行费用的几点措施

脉冲袋式除尘器,因其具有良好的清灰效果,并可在较高的过滤风速下稳定运行,因而在袋式除尘器中,占有极其重要的地位。本文介绍了如何降低脉冲袋式除尘器的运行费用,并提出了相应的措施及其在设计中应注意的问题。     

STUDY OF INTERFACES AND SURFACES OF YBa_2Cu_3O_(7-x)-Ag

Interfaces and surfaces of YBa_2Cu_3O_(7-x)(YBCO)-Ag have been studied by SEM-EDXand AES.No effect of Ag on 123 structure in X-ray diffraction pattern was observedfor 0.4 mol Ag doped YBCO.AES analysis indicated that Ag segregated on surfaceof YBCO and resulted in decrease of YBCO-metal lead resistance.In addition,solutionand segregation of Ag as elemental state were often appeared on interfaces and surfacesof high temperature annealed YBCO,whether elemental Ag or compound Ag_2O andAgNO_3 adopted as doping material.     

IN-SITU OBSERVATION OF CRACK TIP DEFORMATION IN A DUPLEX STAINLESS STEEL

The development of dislocation structures in the plastic zone ahead of a crack tip has been in-vestigated in a duplex stainless steel during in-situ deformation experiments in a scanningtransmission electron microscope.It was found that the dislocation distribution wassignificantly different in the ferrite and in the austenite.In the ferrite grains,the dislocationsemitted by the crack tip may cross-slip out of the original slip planes and form a broad plasticzone.However,in the austenite,the dislocation free zone is small and the dislocations emittedby the crack pile up in its slip plane.The selection of slip systems at the crack tip depends onthe crack tip Schmid factors in both phases.But after large deformation,the selection of thesecond slip systems at the craek tip in austenite does not depend on the Schmid factors.     

工艺参数对射频磁控溅射PTFE靶形成的等离子体组成的影响

采用四极质谱仪测量了试验参数对高压脉冲增强射频磁控溅射PTFE靶等离子体气氛的影响规律。结果表明：增加脉冲偏压、脉冲频率、脉宽、射频功率和气压能提高Az离子对PTFE靶的溅射能力，增加空间中氟碳自由基的数量，其中各参数对峰位位于25．0aum处的氟碳自由基强度影响最大：脉冲电压从10kV提高到20kV能将该峰强度提高2倍；脉宽从40s提高到100μs强度提高80倍；频率从50Hz提高到200Hz强度提高4倍；溅射气压由0．1Pa提高到0.3Pa强度提高6倍；射频功率由200W提高到400W强度提高6倍。励磁电流能有效的约束氟碳自由基的空间分布。     

线阵电荷耦合器技术在自动测长系统中的应用

介绍用线阵电荷耦合器件(CCD)技术设计的型材在线实时测量系统。采用粗测和精测相结合的方法，解决了较大长度范围内精确测量问题。详细介绍动态在线非接触式测控系统的基本工作原理及软硬件组成。实测结果表明其测量精度高、效果好，能满足快速流水线的现场检测。