Interfacial segregation of Ti in the brazing of diamond grits onto a steel substrate using a Cu-Sn-Ti brazing alloy

Diamond grits were brazed onto a steel substrate using a prealloyed Cu-10Sn-15Ti (wt pct) brazing alloy at 925 °C and 1050 °C. Due to the relatively high concentration of Ti in the brazing alloy, the braze matrix exhibited a composite structure, composed of β-(Cu,Sn), a Cu-based solid solution, and various intermetallic compounds with different morphologies. The reaction of Ti with diamond yielded a continuous TiC layer on the surfaces of the diamond grits. On top of the TiC growth front, an intermetallic compound, composed of Sn and Ti, nucleated and grew into a randomly interwoven fine lacey structure. An interfacial structure developed as the interwoven fine lacey phase was semicoherently bonded to the TiC layer, with the Cu-based braze matrix filling its interstices. The thickness of such a composite layer was increased linearly with the square root of isothermal holding time at 925 °C, complying with the law of a diffusion-controlled process. However, at 1050 °C, the segregation behavior of Ti and Sn to the interfaces between the TiC layer and the braze matrix diminished, due to the increased solubility of Ti in the Cu-based liquid phase. The enhanced dissolution of Ti in the Cu-based liquid phase at 1050 °C also caused the precipitation of rod-like CuTi with an average diameter of about 0.2 μm during cooling. SnTi₃ was the predominant intermetallic compound and existed in three different forms in the braze matrix. It existed as interconnected grains of large size which either floated to the surface of the braze matrix or grew into faceted grains. It also exhibited a nail-like structure with a mean diameter of about 1 μm for the rod section and a lamellar structure arising from a eutectic reaction during cooling.     

喷射轧制Fe-4.5%Si硅钢片的组织和性能

采用喷射成形和轧制工艺制备了厚度为0.5mm的Fe-4.5%Si高硅钢片，并对其密度、显微组织和电磁性能进行了测试分析，研究结果表明：在最佳的喷射成形和轧制工艺条件下，所制备硅钢片的磁感应强度B25为1.544T、B50为1.641T；铁损P1050为1.437W/kg、P1550为3.43W/kg，说明喷射成形轧制技术可以制备出高磁感应强度、低铁损的高硅钢片。     

A random switching method for HPWM full-bridge inverter

To overcome the problem of unequal switching loss in power switches, in conventional hybrid pulse width modulation (HPWM) full-bridge inverters, a random switching method for HPWM full-bridge inverters is proposed. The proposed method equalizes switching losses of the four switches, while also providing good output performance     

等偏移距自动初至静校正

茅金根 ,梁秀文 ,杨午阳 ,冯有奎 .等偏移距自动初至静校正 .石油地球物理勘探 ,2 0 0 2 ,37(5 ) :4 6 9～ 4 72　　本文提出一种自动计算静校正量的新方法。它首先在等偏移距道集内对相邻道的初至波采用高精度相关构建一个关于炮、检时差的超大矩阵方程 ,然后采用优化统计迭代算法求解炮点和检波点的静校正量 ,并用概率分布函数确定精确的炮、检静校正量 ,最后用误差校正函数消除炮、检静校正误差。实际资料处理结果表明 ,本方法自动、省时、精度高。     

浅谈水利枢纽道路工程建设中的几个问题及其对策

从水利枢纽工程建设的实际出发,分析了枢纽道路建设中的几个值得考虑的基本问题。针对永久性道路的建设环境和建筑特点以及临时性道路的复杂性和多样性,提出了永久性道路和临时性道路建设的基本对策。基于高新技术材料HEC作为道路建筑胶凝材料的实际工程应用,在道路结构布局观念、设计思想、建筑选材和施工工艺及其技术经济性能比等方面提出了枢纽道路工程建设的实施方案,其有效性和可推广性在水布垭道路工程建设中得到了印证。     

提高混炼质量的新型传动系统

为了使橡胶混炼设备能够适应新材料新工艺的快速发展，在现今不稳定的商业投资环境下，选择一种高度灵活性的传动系统，既能使设备保有先进性，又能很快得到投资回报，可谓为一种不可多得的投资理念，Haqqlunds公司生产的带液压电机传动系统，可使相切型密炼机的产品质量远远好于采用传统的固定速度，速比密炼机的产品质量，也可使啮合型密炼机充分利用所配置的传动功率，还可广泛用于开炼机，双螺杆压片机和压延机，业已证明，其工作可靠，维修便宜。     

Improving signal prediction performance of neural networks through multiresolution learning approach.

In this paper, we extend the original work on multiresolution learning for neural networks, and present new developments on the multiresolution learning paradigm. The contributions of this paper include: (1) proposing a new concept and method of adjustable neural activation functions in multiresolution learning to improve neural network learning efficacy and generalization performance for signal predictions; (2) providing new insightful explanations for the multiresolution learning paradigm from a multiresolution optimization perspective; (3) exploring underlying ideas why the multiresolution learning scheme associated with adjustable activation functions would be more appropriate for the multiresolution learning paradigm; and (4) providing rigorous validations to evaluate the multiresolution learning paradigm with adjustable activation functions and comparing it with the schemes of multiresolution learning with fixed activation functions and traditional learning. This paper presents systematically new analytical and experimental results on the multiresolution learning approach for training an individual neural network model, demonstrates our integral solution on neural network learning efficacy, and illustrates the significant improvements on neural networks' generalization performance and robustness for nonlinear signal predictions.     

AutoCAD 下非结构网格自动生成

在AutoCAD环境下，从背景网格生成和数据结构两方面对推进阵面法进行修正。采用修理后的方法，使得在流场、泥沙输移和床面冲淤数值计算的前处理过程中无须精心预设内部控制点而只需给边界一个尺度，就能自动生成适应任意复杂边界的非结构网格，从而提高网格生成、优化的效率和通用性。     

旋风分离器结构改进的研究

根据旋风分离器的工作原理及应用特点 ,分析了影响旋风分离器分离效率的因素及结构存在的问题 ,并提出了改进措施 ,即内管外壁增设螺旋翼片 ,扩散形锥体改为悬挂挡板。通过实验观察 ,改进结构的旋风分离器分离效率比常规旋风分离器高。实践证明 ,对于密度差异较小的非均相物系的分离 ,只要对旋风分离器作适当改进 ,仍能取得令人满意的效果 ,这大大拓宽了旋风分离器的应用领域     

中国珠宝销售的可持续发展

通过对改革开放20多年来中国珠宝业发展的回顾与分析, 认为在激烈的市场竞争中, 珠宝业要达到可持续发展必须具备6个要素: (1)敬业精神; (2)信用意识; (3)创新意识和创新能力; (4)激励机制和团队精神; (5)资本营运和资源整合能力; (6)关系营销技巧.