A Plug-and-Play,Scalable Control Method for AC Island Microgrid

Wireless Personal Communications - In this paper, a scalable, plug-and-play (PnP) and system-stable synthesis control method is proposed for the AC island microgrid consisting of a distributed...     

一种新型单层递归神经网络解决非光滑伪凸优化问题

非光滑伪凸优化问题是一类比较特殊的非凸优化问题,常出现在各类科学与工程应用中,因此具有很大的研究价值.针对现有神经网络模型解决非光滑伪凸优化问题存在的不足,该文基于微分包含理论,提出一种新型单层递归神经网络模型.通过理论分析,证明了神经网络状态解在有限时间内收敛到可行域,且永驻其中,最终神经网络状态解收敛于原优化问题的最优解.最后,通过数值实验,验证了所提理论的有效性.与现有的神经网络相比,该文所提神经网络模型结构简单仅为单层,不需要提前计算罚参数,且对初始点选取没有任何特殊的要求.     

Decomposed-distance weighted optimal transport for unsupervised domain adaptation

Applied Intelligence - Unsupervised Domain Adaptation (UDA) aims to transfer knowledge from a label-rich source domain to an unlabeled target domain with a different but related distribution....     

Dynamic response of Kevlar®29/epoxy laminates under projectile impact-experimental investigation

This authors of this article investigated the dynamic response of woven Kevlar®29/epoxy laminates subjected to the impact loading. The cylindrical aluminum foam projectile and steel projectile were used to exert the impulse on the laminates. Deformation/failure modes, deflections, strain histories, and failure mechanisms were obtained and discussed. The results showed that with the high toughness of Kevlar fiber, the deformation modes of the laminates exhibited some characteristics similar to the metal panel, such as large global deformation. The failure mechanisms like matrix failure, fiber splitting, and fibrillation were observed. These micron failures led to the macroscopic delamination and fracture of the laminates.     

60°镜面光泽测量值不确定度的评定

本文采用光泽度仪对漆膜的60°镜面光泽进行了测量,对产生测量不确定度的因素进行了分析,并对其A类和B类不确定度进行了分别评定,最终获得其测量结果的扩展不确定度。     

A Two‐Stage Annealing Strategy for Crystallization Control of CH3NH3PbI3 Films toward Highly Reproducible Perovskite Solar Cells

The solvent‐engineering method is widely used to fabricate top‐performing perovskite solar cells, which, however, usually exhibit inferior reproducibility. Herein, a two‐stage annealing (TSA) strategy is demonstrated for processing of perovskite films, namely, annealing the intermediate phase at 60 °C for the first stage then at 100 °C for the second stage. Compared to conventional direct annealing temperature (DHA) at 100 °C, using this strategy, MAPbI₃ films become more controllable, leading to superior film uniformity and device reproducibility with the champion device efficiency reaching 19.8%. More specifically, the coefficient of variation of efficiency for 49 cells is reduced to 5.9%, compared to 9.8% for that using DHA. The TSA process is carefully studied using Fourier transform infrared spectroscopy, X‐ray diffraction, and UV–vis absorption spectroscopy. It is found that in comparison with DHA the formation of hydrogen bonding and crystallization of perovskite are much slower and can be better controlled when using TSA. The improvements in film uniformity and device reproducibility are attributed to: 1) controllable MAPbI₃ crystal growth stemming from the progressive formation of hydrogen bonding between methylammonium and halide; 2) suppression of intermediate phase film dewetting, which is believed to be due to its decreased mobility at the initial low‐temperature annealing stage.     

In-situ synthesis of TiO2 nanostructures on Ti foil for enhanced and stable photocatalytic performance

TiO_2 nanostructures with strong interfacial adhesion and diverse morphologies have been in-situ grown on Ti foil substrate through a multiple-step method based on conventional plasma electrolytic oxidation(PEO) technology, hydrothermal reaction and ion exchange process. The PEO process is critical to the formation of TiO_2 seeding layer for the nucleation of Na_2Ti_3O_7 and H_2Ti_3O_7 mediates that are strongly attached to the Ti foil. An ion exchange reaction can finally lead to the formation of H_2Ti_3O_7 nanostructures with diverse morphologies and the calcination process can turn the H_2Ti_3O_7 nanostructures into TiO_2 nanostructures with enhanced crystallinity. The morphology of the TiO_2 nanostructures including nanoparticles(NP), nanowhiskers(NWK), nanowires(NW) and nanosheets(NS) can be easily tailored by controlling the NaOH concentration and reaction time during hydrothermal process. The morphology, composition and optical properties of TiO_2 photocatalysts were analyzed using scanning electron microscope(SEM), X-ray diffraction(XRD), photoluminescence(PL) spectroscopy and UV–vis absorption spectrum. Photocatalytic tests indicate that the TiO_2 nanosheets calcined at 500?C show good crystallization and the best capability of decomposing organic pollutants. The decoration of Ag cocatalyst can further improve the photocatalytic performance of the TiO_2 nanosheets as a result of the enhanced charger separation efficiency. Cyclic photocatalytic test using TiO_2 nanostructures grown on Ti foil substrate demonstrates the superior stability in the photodegradation of organic pollutant, suggesting the promising potential of in-situ growth technology for industrial application.     

从“7.18“网络攻击案分析网络黑客犯罪

近年来,互联网应用飞速发展,国内网民规模日益扩大。与此同时,网络黑客的攻击破坏活动已成为影响互联网安全的主要问题之一。本文结合上海警方侦破“7·18”私车额度拍卖系统网络攻击案的现实案例,分析了当前网络黑客案件平民化、趋利化、组织化的规律特点,以及公安机关在案件侦办过程中常见的一些难点问题,并从加强日常管理和完善刑事立法两个层面提出了针对性的对策和建议。     

PLC控制在转炉上的应用案例

介绍荣信钢铁转炉过程控制系统的组成、系统功能、技术应用。     

取代酚对日本长腿蛙蝌蚪急性毒性的QSAR研究

用Hartree-Fock(HF)和DFT-B3LYP方法,分别在较高基组6-31G**和6.311G**水平下,全优化计算了21种取代酚化合物.从中获得分予最高占用和最低空轨道能(EHOMO和ELUMO)、前线轨道能级差(△E＝EHOMO-ELUMO)、分子总能量(ET)、氧原了所带的最高正电荷(QH+)、最负原子的静电荷(Q-)、分子偶极矩(μ)和分子体积(V)等描述符.结合文献中标题化合物对日本长腿蛙蝌蚪的毒性值(-logLC50)和辛醇/水分配系数(logKow),由线性同归方法成功建立包含10gKow、ELUMO和Q-的三参数QSAR模型.其中,模型(5)的复相关系数R2=0.944 8,交叉验证系数Q2=0.920 5,标准偏差SE=0.187,Fisher检验值F=98.390,故其预测能力较好.由此推断,标题物对日本长腿蛙蝌蚪的毒性作用分为2步,首先穿过细胞壁在细胞内富集,以logKow和Q-描述;其次与亲核试剂发生亲电反应,以风ELUMO表示.