Green synthesis of silver nanoparticles using Zea mays and exploration of its biological applications

The biosynthesis of silver nanoparticles (AgNPs) has been proved to be a cost effective and environmental friendly approach toward chemical and physical methods. In the present study, biosynthesis of AgNPs was carried out using aqueous extract of Zea mays (Zm) husk. The initial colour change from golden yellow to orange was observed between 410 and 450 nm which confirmed the synthesis of AgNPs. Also, dynamic light scattering‐particle size analysis confirmed the average size to be 113 nm and zeta potential value of −28 kV. The morphology of synthesised Zm AgNPs displayed flower‐shaped structure, X‐ray diffraction pattern revealed the strongest peaks at 2θ = 38.6° and 64° which proved that the nanoparticle has the face centred crystalline structure. The Fourier transform infrared spectroscopy results showed strong absorption bands at 1394.53, 2980.02 and 2980.02 cm⁻¹ due to the presence of alkynes, carboxylic acids, alcoholic and phenolic groups. The maximum zone of inhibition was observed against Salmonella typhi (22 mm) and Candida albicans (18 mm). The synthesised nanoparticles exhibited more free radical scavenging activity than the aqueous plant extract. This is the first report on the synthesis of AgNP from Zm husk, delivers the efficient and stable Zm AgNPs through simple feasible approach toward green biotechnology.Inspec keywords: silver, nanoparticles, nanofabrication, light scattering, particle size, X‐ray diffraction, crystal structure, Fourier transform infrared spectra, absorption coefficients, free radicalsOther keywords: green synthesis, silver nanoparticles, biosynthesis, environmental friendly approach, aqueous extract, Zea mays husk, colour change, golden yellow, dynamic light scattering‐particle size analysis, average size, zeta potential value, flower‐shaped structure, X‐ray diffraction pattern, face centred crystalline structure, Fourier transform infrared spectroscopy, absorption bands, alkynes, carboxylic acids, alcoholic groups, phenolic groups, Salmonella typhi, Candida albicans, free radical scavenging activity, aqueous plant extraction, green biotechnology, size 113 nm, wavelength 410 nm to 450 nm     

Green chemistry synthesis of nano‐cuprous oxide

Green chemistry and a central composite design, to evaluate the effect of reducing agent, temperature and pH of the reaction, were employed to produce controlled cuprous oxide (Cu₂ O) nanoparticles. Response surface method of the ultraviolet–visible spectroscopy is allowed to determine the most relevant factors for the size distribution of the nanoCu₂ O. X‐ray diffraction reflections correspond to a cubic structure, with sizes from 31.9 to 104.3 nm. High‐resolution transmission electron microscopy reveals that the different shapes depend strongly on the conditions of the green synthesis.Inspec keywords: nanostructured materials, copper compounds, nanofabrication, pH, response surface methodology, ultraviolet spectra, X‐ray diffraction, transmission electron microscopyOther keywords: green chemistry synthesis, nanocuprous oxide, reducing agent, reaction pH, response surface method, ultraviolet‐visible spectroscopy, size distribution, cubic structure, high‐resolution transmission electron microscopy, X‐ray diffraction reflection, central composite design, Cu₂ O     

Production inventory with service time and interruptions

This paper considers an (s,S) production inventory system with positive service time, with time for producing each item following Erlang distribution. Customers arrive according to a Poisson process. A customer who arrives when there is no inventory in the system is considered lost. On the other hand, a customer who finds a busy server with at least one inventory in the system joins a queue of infinite capacity. When the inventory level falls to s, production process is switched on, and it is switched off when the inventory level reaches back to S. Service time to each customer also follows an Erlang distribution. The service of a customer may be interrupted, where the time for such a phenomenon follows an exponential distribution, whenever it occurs. An interrupted service, after repair, resumes from where it was stopped. The correction/repair time follows an exponential distribution. We assume that the service of a single customer may encounter any number of interruptions and that the customer being served waits there until his service is completed. Moreover, at a time the server is subject to at most one interruption. We also assume that no inventory is lost due to a service interruption. Like the service process, the production process also is subject to interruptions, where the duration to an interruption follows an exponential distribution. However, in contrast to the service interruption, in the case of interruption to production process, we assume that the item being processed is lost because of interruption. That is, the production process, on being interrupted, restarts from the beginning, after repair. The repair time of an interrupted production process follows exponential distribution. Few of the last service phases are assumed to be protected in the sense that the service will not be interrupted while being in these phases. The same is assumed for the production process also.

The model is analysed as a level-independent quasi-birth–death process. We apply a novel method to obtain an explicit expression for the necessary and sufficient condition for the stability of the system under study. This method works even if we assume general phase-type distributions for the production as well as the service processes, and hence can be used to characterise the stability of inventory systems where the assumption of disallowing the customers to join the system, when there is a shortage of inventory has been made. Under stability, we apply matrix analytic methods to compute the system state distribution. In consequence to that, several system performance measures have been derived, and their dependence on the system parameters has been studied numerically.     

Use of Objective-Based Undergraduate Research Project Experience as a Graduate Student Recruitment Tool

This paper describes experience in using hands-on undergraduate research exposure as a tool to identify and recruit potentially successful graduate students. Undergraduate students with an interest in graduate education work toward a well-defined goal under the guidance of the faculty member, typically supporting a senior graduate student on his/her thesis research. The quality of the undergraduate research is maintained by requiring that the results of the research be presented at a major technical conference. It is found that a large percentage of such undergraduate students ultimately enroll and succeed in graduate school.     

A novel trench clustered insulated gate bipolar transistor (TCIGBT)

A new trench clustered insulated gate bipolar transistor (TCIGBT) is reported. In this device, a multitude of UMOS cathode cells is enclosed within a common n-well and p-well. The TCIGBT provides a unique "self-clamping" feature to protect the trenches from high electric fields. The simulation results based on 1.2 kV nonpunchthrough technology indicate an improvement of 25% in on state and 28% in the turn-off losses in comparison to the state-of-the-art trench IGBT. The saturation current levels of the TCIGBT, which can be designed independent of the forward drop, are also lower.     

Surface modification of CP-Ti to improve the fretting-corrosion resistance: Thermal oxidation vs. anodizing

Fretting corrosion is one of the important reasons for the failure of prosthesis made of titanium and titanium alloys under in vivo condition. The fretting-corrosion behaviour of untreated, anodized and thermally oxidized commercially pure titanium (CP-Ti) in Ringer's solution was evaluated based on the change in free corrosion potential (FCP) measured as a function of time. A comparison of the performance of untreated, anodized and thermally oxidized CP-Ti under fretting-corrosion conditions is reported for the first time in this paper. The study reveals that surface modification of CP-Ti by both anodizing and thermal oxidation improved the fretting-corrosion resistance of CP-Ti and among them the performance of thermally oxidized CP-Ti is superior to that of the anodized one. Adhesive galling is the predominant wear mechanism for untreated CP-Ti, adhesive wear and delamination are found to be operative for anodized CP-Ti whereas an abrasive wear mechanism is operative for thermally oxidized CP-Ti when they are fretted against an alumina ball.     

Genetic vaccination against Coccidioides immitis: comparison of vaccine efficacy of recombinant antigen 2 and antigen 2 cDNA

Previous studies from our laboratory established that C-ASWS, an alkali-soluble, water-soluble extract from cell walls of Coccidioides immitis, protects mice against lethal challenge with this fungus. The C-ASWS extract contains a glycosylated protein, designated antigen 2 (Ag2), and a polysaccharide antigen. We recently cloned Ag2 cDNA and showed that the recombinant fusion protein elicited strong delayed-type hypersensitivity responses in immunized mice. This investigation was undertaken to determine if the recombinant Ag2 protein, expressed as an Ag2-glutathione S-transferase (GST) fusion protein, or Ag2 cDNA would protect mice against lethal challenge with C. immitis. The recombinant Ag2-GST protein protected BALB/c mice against intraperitoneal challenge with 250 arthroconidia, as assessed by a decrease in fungal CFU in tissues. The Ag2-GST-immunized mice did not show, however, an increased survival during a 30-day period postinfection. By contrast, immunization of mice with Ag2 cDNA ligated into the pVR1012 plasmid engendered protection against intraperitoneal challenge with 2,500 arthroconidia and against pulmonary challenge with 50 arthroconidia. Vaccine efficacy paralleled the development of delayed-type hypersensitivity responses to C. immitis antigen. Whereas mice vaccinated with the recombinant Ag2-GST protein did not mount footpad hypersensitivity to C-ASWS or the recombinant Ag2-GST protein, mice vaccinated with the pVR1012-Ag2 construct mounted a strong footpad hypersensitivity and their spleen cells secreted gamma interferon upon in vitro stimulation with the Ag2-containing C-ASWS extract. This is the first investigation to show that genetic immunization can protect against lethal challenge with C. immitis.     

Identification of 130 kDa cell surface LDL-binding protein from smooth muscle cells as a partially processed T-cadherin precursor

Atypical cell surface lipoprotein-binding proteins of 105 kDa and 130 kDa are present in membranes of vascular smooth muscle cells. We recently identified the 105 kDa protein from human aortic media as T-cadherin, an unusual glycosylphosphatidylinositol (GPI)-anchored member of the cadherin family of cell adhesion proteins. The goal of the present study was to determine the identity of 130 kDa lipoprotein-binding protein of smooth muscle cells. We applied different approaches that included protein sequencing of purified protein from human aortic media, the use of human T-cadherin peptide-specific antisera, and enzymatic treatment of cultured cells with trypsin and GPI-specific phospholipase C. Our results indicate that the 130 kDa protein is a partially processed form of T-cadherin which is attached to the membrane surface of smooth muscle cells via a GPI anchor and contains uncleaved N-terminal propeptide sequence. Our data disclose that, in contrast to classical cadherins, T-cadherin is expressed on the cell surface in both its precursor (130 kDa) and mature (105 kDa) forms.     

Corrigendum Static Frequency Assignment in Cellular Networks

Abstract. No abstract.     

Case study of safe lowering of an in service gas pipeline

This paper describes an experimental investigation carried out involving instrumentation, measurement and monitoring of stresses in a large diameter gas pipeline during its lowering operations. It also highlights the ingenious techniques developed and adopted to overcome the difficulties pertaining to long leadwires, measurement of existing strains on the curved surface of a pipeline and protection of strain gauge installations. These novel methods were used to ensure smooth and proper functioning of strain gauge instrumentation even under the severe field conditions at site for more than two weeks, till the lowering operations and pipeline monitoring was successfully completed.