Improving an immunoassay response to related polychlorinated biphenyl analytes by mixing antibodies

Immunoassays for detection of a class of closely related antigens, e.g., PCBs, have often been too specific (responding strongly to some members of the class and missing others) and no general method for adjusting the response has been described. In this paper, the difference in the response of a model immunoassay to different Kanechlors (Japanese commercial mixtures of PCBs, analogous to Aroclors in the United States) is reduced from 20- or 50-fold (depending on which antibody is used) to 3-fold when the antibodies are mixed at the proper ratio. A mathematical model based on competitive binding of two antibodies for up to four antigens has been developed and used to describe the assay performance and to predict optimum mix ratios for the antibodies used. The model (based on separate measurement of each antibody's effective Kd for each Kanechlor) provides an excellent fit to the measured mixed antibody assay response. The model is also successful in identifying cases where mixing monoclonal antibodies will not improve the response. It is thought the method described will have applicability in a variety of cases where the analytical goal is semiquantitative screening based on the total quantity of an unknown mixture of related compounds.     

Least detectable concentration and dynamic range of three immunoassay systems using the same antibody

The least detectable concentration (LDC) and dynamic range (DR) of three immunoassay systems are compared using four distinct antibodies (all specific for estradiol but with different affinities) on each system. The systems evaluated include the industry standard, ELISA, and two biosensors, surface plasmon resonance and kinetic exclusion. In all cases, the measurements of inhibition curves (response vs estradiol concentration) were contracted to outside experts (the biosensor manufacturers themselves in the case of the biosensors), each of whom was supplied with the same blind samples. Each biosensor manufacturer also reported an estimate of the equilibrium dissociation constant (Kd) for each of the antibodies. The LDC and DR observed for the kinetic exclusion biosensor are consistent with an interpretation of Kd limited detection while that from the other biosensor and ELISA show limits of detection somewhat above those expected for Kd limited performance. The determined LDC and DR of each biosensor is self-consistent in the sense that none of the inhibition data contradicts theoretical limits associated with the Kd as measured on that system; however, some contradictions are apparent across platforms. The use of multiple antibodies of differing Kd improves confidence that the observed differences in performance are associated with the immunoassay system rather than the particular analyte.     

Hyaluronic acid and silver sulfadiazine-impregnated polyurethane foams for wound dressing application

Five different kinds of PU foam wound dressings were prepared to investigate their wound healing capability. They include (i) PU+silver sulfadiazine (AgSD), (ii) PU+alginate (Al), (iii) PU+Al+AgSD, (iv) PU+hyaluronic acid (HA), and (v) PU+HA+AgSD. Physical properties and in vitro behaviors of AgSD release and fibroblast adhesion on those dressings were evaluated. From the drug release and fibroblast adhesion studies, it was observed that PU foam impregnated with both HA and AgSD shows good drug release behavior and low adhesion of the cells. Furthermore, the HA and AgSD-containing PU foam showed excellent wound healing effect without any inflammation or yellow cluster. The wound size decreased around 77% after 1 week application of that foam dressing onto a rat skin defect.     

Implementation of a process analytical technology system in a freeze-drying process using Raman spectroscopy for in-line process monitoring

The aim of the present study was to propose a strategy for the implementation of a Process Analytical Technology system in freeze-drying processes. Mannitol solutions, some of them supplied with NaCl, were used as models to freeze-dry. Noninvasive and in-line Raman measurements were continuously performed during lyophilization of the solutions to monitor real time the mannitol solid state, the end points of the different process steps (freezing, primary drying, secondary drying), and physical phenomena occurring during the process. At-line near-infrared (NIR) and X-ray powder diffractometry (XRPD) measurements were done to confirm the Raman conclusions and to find out additional information. The collected spectra during the processes were analyzed using principal component analysis and multivariate curve resolution. A two-level full factorial design was used to study the significant influence of process (freezing rate) and formulation variables (concentration of mannitol, concentration of NaCl, volume of freeze-dried sample) upon freeze-drying. Raman spectroscopy was able to monitor (i) the mannitol solid state (amorphous, alpha, beta, delta, and hemihydrate), (ii) several process step end points (end of mannitol crystallization during freezing, primary drying), and (iii) physical phenomena occurring during freeze-drying (onset of ice nucleation, onset of mannitol crystallization during the freezing step, onset of ice sublimation). NIR proved to be a more sensitive tool to monitor sublimation than Raman spectroscopy, while XRPD helped to unravel the mannitol hemihydrate in the samples. The experimental design results showed that several process and formulation variables significantly influence different aspects of lyophilization and that both are interrelated. Raman spectroscopy (in-line) and NIR spectroscopy and XRPD (at-line) not only allowed the real-time monitoring of mannitol freeze-drying processes but also helped (in combination with experimental design) us to understand the process.     

Formulation design of an HPMC-based sustained release tablet for pyridostigmine bromide as a highly hygroscopic model drug and its in vivo/in vitro dissolution properties

Pyridostigmine bromide (PB), a highly hygroscopic drug was selected as the model drug. A sustained-release (SR) tablet prepared by direct compression of wet-extruded and spheronized core pellets with HPMC excipients and exhibited a zero-order sustained release (SR) profile. The 2³ full factorial design was utilized to search an optimal SR tablet formulation. This optimal formulation was followed zero-order mechanism and had specific release rate at different time intervals (released % of 1, 6, and 12 hr were 15.84, 58.56, and 93.10%). The results of moisture absorption by Karl Fischer meter showed the optimum SR tablet could improve the hygroscopic defect of the pure drug (PB). In the in vivo study, the results of the bioavailability data showed the T_max was prolonged (from 0.65 ± 0.082 hr to 4.83 ± 1.60 hr) and AUC_0-t (from 734.88 ± 230.68 ng/ml.hr to 1153.34 ± 488.08 ng/ml.hr) and was increased respectively for optimum PB-SR tablets when compared with commercial immediate release (IR) tablets. Furthermore, the percentages of in vitro dissolution and in vivo absorption in the rabbits have good correlation. We believe that PB-SR tablets designed in our study would improve defects of PB, decrease the frequency of administration and enhance the retention period of drug efficacy in vivo for personnel exposed to contamination situations in war or terrorist attacks in the future.     

Vortex-induced flame extinction in two-phase counterflow diffusion flames with CH planar laser-induced fluorescence and particle-image velocimetry

Here the interaction between a laminar two-phase, non-pre-mixed counterflow flame and a vortex is examined. Special emphasis is given to the influence of different flame and vortex parameters on the extinction behavior of the flame. Simultaneous planar laser-induced fluorescence of the CH radical layer produced by the flame and particle-image velocimetry measurements of the flowfield are used to characterize the flame-vortex interaction. These simultaneous diagnostics are used for the first time in this configuration. The extinction processes occurring during the flame-vortex interaction can be analyzed by this method, especially the influence of strain at the flame surface. The influence of the droplets on the extinction behavior appears clearly compared with a fully gaseous flame. The spray flame is weaker and extinguishes earlier than does a gaseous flame. In the measurements an additional broadband signal in the vicinity of the CH layer is probably due to the induced fluorescence of polycyclic aromatic hydrocarbons, excited at the same wavelength.     

Sample classification based on Bayesian spectral decomposition of metabonomic NMR data sets

1H NMR spectra of biofluids provides a wealth of biochemical information on the metabolic status of an organism. Through the application of pattern recognition and classification algorithms, the data have been shown to provide information on disease diagnosis and the beneficial and adverse effects of potential therapeutics. Here, a novel approach is described for identifying subsets of spectral patterns in databases of NMR spectra, and it is shown that the intensities of these spectral patterns can be related to the onset and recovery from a toxic lesion in both a time-related and dose-related fashion. These patterns form a new type of combination biomarker for the biological effect under study. The approach is illustrated with a study of liver toxicity in rats using NMR spectra of urine following administration of a model hepatotoxin hydrazine.     

基于图像处理的投弃式温深仪探头姿态测量研究

为改进国产投弃式温深仪(XBT)的下降速率公式,采用基于图像处理的方法测量XBT探头的运动参数.采用背景差分法获取差分图像,选择合适的阈值并对差分图像二值化,标记二值图像中的连通区域,将二值图像分割为几个互相独立的区域.通过计算分析各连通区域的特征集合来识别XBT探头.利用探头中轴线描述探头的运动姿态,将探头的长轴作为探头的初始中轴线,然后通过迭代优化的方法得到更加精确的结果.实验结果表明:该方法角度测量平均误差小于0.5°,能满足XBT探头姿态测量精度要求.目前已将基于该算法搭建的视觉测量系统应用于XBT投放实验中,取得了令人满意的结果.