Effects of zinc doping in DFB lasers emitting at 1.3 and 1.55 mu m

Reports on the performance of GaInAsP/InP DFB lasers with Zn-doped active region. At both 1.3 and 1.55 mu m the authors achieved a large bandwidth owing to the increased differential gain. The carrier lifetime of the lasers decreased with doping level. The decreased carrier lifetime had the effect of reducing the pattern effect, and they could obtain a clear eye opening with 4 Gbit/s NRZ modulation.<>     

CW operation at - 10°C for InGaAlP visible light laser diodes grown by MOCVD

CW operation at - 10°C for InGaP/InGaAlP double heterostructure (DH) laser diodes has been achieved for the first time. The DH wafers were grown by low-pressure metalorganic chemical vapour deposition using methyl metalorganics as the source of group III elements. Under room-temperature pulsed operation, the lasing wavelength was 663 nm and the lowest threshold current density was 7.8 kA/cm2. The CW characteristic temperature T0 was 63 K at around -30°C.     

Super-cooled water behavior inside polymer electrolyte fuel cell cross-section below freezing temperature

This study investigated the phenomenon of water freezing below freezing point in polymer electrolyte fuel cells (PEFCs). To understand the details of water freezing phenomena inside a PEFC, a system capable of cross-sectional imaging inside the fuel cell with visible and infrared images was developed. Super-cooled water freezing phenomena were observed under different gas purge conditions. The present test confirmed that super-cooled water was generated on the gas diffusion layer (GDL) surface and that water freezing occurs at the interface between the GDL and MEA (membrane electrode assembly) at the moment cell performance deteriorates under conditions when remaining water was dry enough inside the fuel cell before cold starting. Moreover, using infrared radiation imaging, it was clarified that heat of solidification spreads at the GDL/MEA interface at the moment cell performance drops. Compared with a no-initial purge condition, liquid water generation was not confirmed to cause ice growth at the GDL/MEA interface after cell performance deterioration. Each condition indicated that ice formation at the GDL/MEA interface causes cell performance deterioration. Therefore, it is believed that ice formation between the GDL/MEA interface causes air gas stoppage and that this blockage leads to a drop in cell performance.     

Reduction of in vitro allergenicity of buckwheat Fag e 1 through the Maillard-type glycosylation with polysaccharides

A major allergenic protein of buckwheat, Fag e 1 prepared from common buckwheat (Fagopyrum esculentum), was covalently linked with food-grade polysaccharides, arabinogalactan or xyloglucan through the controlled dry-heating at 60 °C under 65% relative humidity. The introduction of polysaccharide chain onto the molecular surface of Fag e 1 reduced the allergenicity of Fag e 1. The results revealed that the Maillard-type glycosylation of Fag e 1 with polysaccharides brought about a drastic reduction of the reactivity against human sera of buckwheat-allergy subjects, using immuno dot-blotting, QCM analysis and ELISA. In addition, the glycosylation of Fag e 1 yielded a great improvement of its surface functionality. Solubility of Fag e 1 at the neutral pH was substantially increased up to 13.5 times and 9.6 times by the conjugation with arabinogalactan and xyloglucan, respectively. Emulsifying properties of Fag e 1 were also improved by the glycosylation, of which both emulsifying activity and emulsion stability were more than 6 times higher than those of the native protein.     

Three-Dimensional Stress Analysis of Adhesive Butt Joints of Solid Cylinders Subjected to External Tensile Loads

This paper deals with a three-dimensional stress analysis of adhesive butt joints of similar solid cylinders subjected to external tensile loads. Similar adherends and an adhesive bond are replaced with finite solid cylinders in the analysis. Stress distributions on adhesive joints are analyzed strictly by using the three-dimensional theory of elasticity. The effects of stiffness, thickness and Poisson's ratio of the adhesive bonds and of external load distribution on the normal and the shear stress distributions are shown by numerical calculations. In addition, the analytical result is compared with the result obtained by F.E.M. It is seen that they are in fairly good agreement.     

Early warning system for rainfall- and snowmelt-induced slope failure in seasonally cold regions

In 2005, the Japanese government launched a new nationwide early warning system for predicting debris flow and slope failure disasters based on rainfall intensity and the Soil Water Index (SWI). However, the Japanese government has not set early warning criteria in many mountain areas. In addition, the existing early warning criteria in some areas are much higher than realistic ones, and snowmelt water is not considered in the calculation of the SWI. These two factors have been the cause of many slope failures in seasonally cold regions, induced by rainfall and/or snowmelt, which were not predicted. Therefore, this study attempts to propose a new determination method for setting early warning criteria for rainfall- and/or snowmelt-induced slope failures in seasonally cold regions. For this purpose, the study firstly proposes a combination model for estimating snow density that incorporates the hourly snowmelt water into the Japanese early warning system more accurately by using meteorological monitoring data and modeled snow density. Next, based on case studies and parametric analyses for slope stability assessment, new early warning criteria are proposed for predicting three different patterns of slope failures under two typical types of precipitation (rainfall and snowmelt) conditions. Finally, a new determination method for setting early warning criteria in seasonally cold regions is proposed by referring to the existing early warning criteria near the target area, in accordance with the precipitation types and the local ground conditions of the slopes. Since the existing early warning criteria near the target area already take the effects of the variations in local geology and geography into account, the new determination method for early warning criteria can be applied to arbitrary areas in seasonally cold regions, without directly considering the local soil properties, in the actual design and maintenance works.     

Purification and Characterization of Organic Solvent and Detergent Tolerant Lipase from Thermotolerant Bacillus sp. RN2

The aim of this study was to characterize the organic solvent and detergent tolerant properties of recombinant lipase isolated from thermotolerant Bacillus sp. RN2 (Lip-SBRN2). The isolation of the lipase-coding gene was achieved by the use of inverse and direct PCR. The complete DNA sequencing of the gene revealed that the lip-SBRN2 gene contains 576 nucleotides which corresponded to 192 deduced amino acids. The purified enzyme was homogeneous with the estimated molecular mass of 19 kDa as determined by SDS-PAGE and gel filtration. The Lip-SBRN2 was stable in a pH range of 9-11 and temperature range of 45-60 °C. The enzyme was a non metallo-monomeric protein and was active against pNP-caprylate (C8) and pNP-laurate (C12) and coconut oil. The Lip-SBRN2 exhibited a high level of activity in the presence of 108% benzene, 102.4% diethylether and 112% SDS. It is anticipated that the organic solvent and detergent tolerant enzyme secreted by Bacillus sp. RN2 will be applicable as catalysts for reaction in the presence of organic solvents and detergents.     

Implicit integration and consistent tangent modulus of a time‐dependent non‐unified constitutive model

This paper describes the implicit integration and consistent tangent modulus of an inelastic constitutive model with transient and steady strain rates, both of which are time‐ and temperature‐dependent; the transient rate is influenced by the evolution of back stress decomposed into parts, while the steady rate depends only on applied stress and temperature. Such a non‐unified model is useful for high‐temperature structural analysis and is practical owing to the ease in determining material constants. The implicit integration is shown to result in two scalar‐valued coupled equations, and the consistent tangent modulus is derived in a quite versatile form by introducing a set of fourth‐rank constitutive parameters into the discretized evolution rule of back stress. The constitutive model is, then, implemented in a finite element program and applied to a lead‐free solder joint analysis. It is demonstrated that the implicit integration is very accurate if the multilinear kinematic hardening model of Ohno and Wang is employed, and that the consistent tangent modulus certainly affords quadratic convergence to the Newton–Raphson iteration in solving nodal force equilibrium equations. Copyright © 2003 John Wiley & Sons, Ltd.     

HLA-A26 subtype A pockets accommodate acidic N-termini of ligands

BACKGROUND: Fiberoptic flexible sigmoidoscopy (FFS) is routinely requested preoperatively as part of evaluation of pelvic masses to exclude colonic involvement by the tumor or concurrent colonic neoplasm. The aim of our study was to evaluate the utility of preoperative FFS in patients with suspected gynecologic malignancy. METHODS: FFS, performed using a 60 cm sigmoidoscope, evaluated (1) presence of bowel involvement by the tumor, (2) extrinsic compression by the tumor, and (3) presence of colonic neoplasms. FFS findings were correlated with surgical findings. RESULTS: A total of 107 women underwent preoperative FFS and subsequent surgery. Eleven patients (11%) had lower gastrointestinal symptoms. At surgery, 63% of pelvic tumors were malignant and 37% were benign. The most common abnormality at FFS was colonic polyps in 23 patients (21%). Colonic adenomas were found in 11 patients (10%). Extrinsic compression by the tumor without mucosal abnormalities was seen in 15 patients (14%). The most common intraoperative finding was tumor adhering to the bowel in 18 patients requiring dissection, but only 1 patient required bowel resection. Eight of these 18 patients had preoperative lower gastrointestinal symptoms. All 15 patients with extrinsic compression at FFS had tumor adhering to the bowel. CONCLUSIONS: Pelvic masses cause extrinsic compression at FFS in 14% of patients. This is suggestive of tumor adherent to the bowel at surgery. However, bowel resection is rarely required because of tumor involvement. Most patients with bowel adherence by tumor have lower gastrointestinal symptoms. Colonic adenomas are found in one tenth of patients, mostly in patients older than 50 years of age. Preoperative FFS does not change the surgical management of pelvic tumors. Screening FFS is indicated in all patients with pelvic tumors over age 50, as in persons with average risk, but is otherwise unnecessary in evaluation of pelvic masses.     

Kinetics of oxidation of cuprous chloride by oxygen in aqueous hydrochloric acid solutions

The rates of absorption of oxygen into aqueous cuprous chloride solutions containing hydrochloric acid were measured at 15, 25 and 35°C using a baffled agitated vessel operated batchwise and the experimental results were analyzed with the chemical absorption theory. The reaction between oxygen and cuprous chloride was found to be second order, i.e. first order with respect to oxygen and CuCl₂^? ion which is the actual reactive species in aqueous cuprous chloride solutions containing hydrochloric acid. The reaction rate constants were calculated and correlated as a function of temperature.