Hydraulic Study of the Onset of Hypoxia in the Tone River Estuary

Field measurements were conducted to investigate the onset and growth of hypoxia in the Tone River Estuary. Vertical profiles of dissolved oxygen (DO), salinity, and temperature were measured along the deepest line of the estuary. Rates of oxygen consumption by water and sediment in a salt wedge were obtained using laboratory tests. The measurements showed that hypoxia frequently occurred in the front part of the salt wedge and expanded its area toward the river mouth during the summer when the river flow rate was small. The data also suggested that the onset of hypoxia was delayed by the estuarine circulation which supplied oxygen-rich seawater to the salt wedge. To simulate this phenomenon, a two-dimensional flow model in the vertical-longitudinal plane was constructed by transversely integrating the k–ε model equations. The results of model simulation for three months in the summer of 1997 closely matched the field data. The model simulation proved that DO degradation is highly correlated with the residence time of salt water in the estuary.     

Numerical computation of two-loop box diagrams with masses

A new approach is presented to evaluate multi-loop integrals, which appear in the calculation of cross-sections in high-energy physics. It relies on a fully numerical method and is applicable to a wide class of integrals with various mass configurations. As an example, the computation of two-loop planar and non-planar box diagrams is shown. The results are confirmed by comparisons with other techniques, including the reduction method, and by a consistency check using the dispersion relation.     

Fabrication of octacalcium phosphate block through a dissolution-precipitation reaction using a calcium sulphate hemihydrate block as a precursor

Although octacalcium phosphate (OCP) powder and a collagen/gelatin composite demonstrate good potential as bone substitutes, an OCP block has not been fabricated to date. In this study, the feasibility of fabricating an OCP block was evaluated through a dissolution-precipitation reaction using a calcium sulfate hemihydrate (CSH) block as a precursor. When the block was immersed in a phosphate salt solution, its composition changed to that of OCP, while its structure was maintained. The diametral tensile strength (DTS) of the OCP block was 1.0?±?0.2?MPa. The macroporosity and microporosity of the OCP block were 33.4?±?4.5% and, 69.0?±?1.6%, respectively. New bone attached well to the OCP block, and this block was partially replaced by bone 2 weeks after implantation. Four weeks after implantation, the surface of the OCP block was nearly covered with new bone and ~30% of the block was replaced by new bone, while no replacement by bone was observed in the case of a hydroxyapatite (HAp) block used as a control. It is concluded that OCP blocks are potentially suitable for their use as artificial bone substitutes.     

Performance Comparison of Circuits for Pole‐Mounted STATCOM Using SiC Devices

The recent years have seen an increasing trend in the cumulative installed capacity of distributed generators. As a result, voltage management may become difficult in existing power distribution systems in the future. A STATCOM (STAtic synchronous COMpensator) is a promising option for solving this problem because it can control reactive power rapidly and continuously. For a distribution system, STATCOM needs to be pole‐mounted to realize its low cost. However, a transformer for a STATCOM is large and heavy, and hence it is difficult to install a STATCOM on a distribution pole. We adopt a transformerless STATCOM to reduce STATCOM size and use SiC devices with low‐loss performance to obtain a more compact and efficient STATCOM. There are a large number of circuits available for a STATCOM, and there has been considerable research on performance comparisons among these circuits. However, these comparisons were drawn under different conditions, including switching frequency and level number for the circuits. In addition, these comparisons do not include the use of SiC devices. We made an equitable comparison for a 100 kVa pole‐mounted STATCOM using SiC devices. We discuss the performance and characteristics of each circuit in terms of efficiency and volume.     

Study of Cuprate Superconductivity Using the Particle Number Conserving Bogoliubov-de Gennes Equations: ARPES and STS Images From Surface Plus Bulk Layers Model

Journal of Superconductivity and Novel Magnetism - We theoretically study the superconductivity in hole-doped cuprate superconductors by employing a model composed of surface and bulk CuO $$_2$$...     

生产阻燃剂聚酯和阻燃性母料的方法

正专利提供了生产阻燃性聚酯的方法,聚酯通过共聚含有高浓度的磷,共聚物具有高聚合度,而且二乙二醇组分的共聚合度低,不易变色。生产阻燃聚酯的方法包括边搅拌组成物边加热的步骤,组成物含有下述(A)-(E)的组分:(A)用通式(1)表示的磷化合物;(B)不饱和的二羧酸或其形成的酯化合物;(C)由以乙二醇为主所构成的饱和脂肪烃多元醇和/或酯-形成性的衍生物;(D)(B)成分外的多元羧酸或     

Measurement of Flow Stress in Supercooled Austenite for High Hardenability Steel

In this article, the isothermal flow stress in supercooled austenite was measured for a high hardenability steel. Supercooled austenite forms at the nonequilibrium phase and changes into other phases within a short time. It was confirmed that conventional tensile tests, which require maintaining a constant temperature before stretching, cannot accurately measure the flow stress in supercooled austenite. Therefore, a new tensile test named “the continuous cooling tensile test” was developed. In this test, stretching is conducted during continuous cooling. In the continuous cooling tensile test, the flow stress between 673 K and 973 K (400 °C and 700 °C) was measured. Microscopic observations of the continuous cooling test results verified that the microstructures were supercooled austenite.