Dispersion slope equaliser using bend-induced positive dispersionslope in coiled pure-silica fibre

The dispersion slope of a dispersion-shifted fibre has been successfully equalised by using a bend-induced positive dispersion slope in a singlemode fibre. We realised the bent fibre dispersion slope equaliser by using a 1.3 μm zero-dispersion pure silica core fibre (PSM). This equaliser provides a dispersion slope of -12.54 ps/nm² /km in the 1.5 μm region     

Constant-ratio-coupled multi-grain digital synchronizer with flexible input-output delay selection for versatility in low-power applications

The constant-ratio-coupled multi-grain digital synchronizer (CRC-MGsynchronizer) is proposed as a means for making high-speed connections with very low power consumption, both among multiple chips such as processors, controllers, and storage devices, and among on-chip modules. The synchronizer not only provides a wide range of operating frequencies, but is fast locking and only occupies a small area on chip. Therefore, it contributes to large reductions in power consumption and costs. It is suitable for use in various low-power systems (e.g., battery-hungry mobile appliances and low-cost consumer electronic products). Three major techniques were applied to the design: 1)a multi-grain structure for the delay elements, which greatly reduces the number of gates while facilitating locking in a very small number of clock cycles;2) constant-ratio-coupled (CRC) delay lines (measurement versus generation)for flexible selection of the input-output delay; and 3) a new lock stage decision circuit (LSDC) scheme, conferring excellent testability. Moreover,the architecture is all-digital, and thus it has high process portability. By applying these techniques to a DDR memory interface circuit for a mobile application processor fabricated in 130-nm technology, we were able to reduce power consumption by 42% and chip area by 65% compared with a conventional implementation. Furthermore, the novel design spans a frequency range covering 12 times the minimum frequency.     

A Water‐Soluble Mechanochromic Luminescent Pyrene Derivative Exhibiting Recovery of the Initial Photoluminescence Color in a High‐Humidity Environment

Switching of the luminescence properties of molecular materials in response to mechanical stimulation is of fundamental interest and also has a range of potential applications. Herein, a water‐soluble mechanochromic luminescent pyrene derivative having two hydrophilic dendrons is reported. This pyrene derivative is the first example of a mechanochromic luminescent organic compound that responds to relative humidity. Mechanical stimulation (grinding) of this pyrene derivative in the solid state results in a change of the photoluminescence from yellow to green. Subsequent exposure to water vapor induces recovery of the initial yellow photoluminescence. The color change is reversible through at least ten cycles. It is also demonstrated that this compound can be applied as a mechano‐sensing material in frictional wear testing for grease, owing to its immiscibility in non‐polar solvents and its non‐crystalline behavior. Transmission electron microscope and atomic force microscope observations of samples prepared from dilute aqueous solutions of the pyrene derivative on suitable substrates, together with dynamic light scattering measurements for the compound in aqueous solution, indicate that this amphiphilic dumbbell‐shaped molecule forms micelles in water.     

Theatre in the Sky: a ubiquitous broadband multimedia‐on‐demand service over a novel constellation composed of quasi‐geostationary satellites

To meet an ever‐growing demand for wideband multimedia services and electronic connectivity across the world, development of ubiquitous broadband multimedia systems is gaining a tremendous interest at both commercial and academic levels. Satellite networks will play an indispensable role in the deployment of such systems. A significant number of satellite communication constellations have been thus proposed using Geostationary (GEO), Medium Earth Orbit (MEO), or Low Earth Orbit (LEO) satellites. These constellations, however, either require a potential number of satellites or are unable to provide data transmission with high elevation angles. This paper proposes a new satellite constellation composed of Quasi‐GeoStationary Orbit (Quasi‐GSO) satellites. The main advantage of the constellation is in its ability to provide global coverage with a significantly small number of satellites while, at the same time, maintaining high elevation angles. Based on a combination of this Quasi‐GSO satellites constellation and terrestrial networks, the paper proposes also an architecture for building a global, large‐scale, and efficient Video‐on‐Demand (VoD) system. The entire architecture is referred to as a ‘Theatre in the Sky’. Copyright © 2006 John Wiley & Sons, Ltd.     

Application of a chemical heat pump to a cogeneration system

The feasibility of a proposed system that combines a magnesium oxide/water chemical heat pump and a diesel engine as a cogeneration system is discussed based on experimental results. The combined system is intended to utilize the waste heat discharge from the engine by means of the chemical heat pump and to level the heat supply load of the engine, allowing enhanced energy utilization. The thermal performance of the chemical heat pump in the cogeneration system is estimated based on the results of a packed‐bed experiment. The estimation indicates that by storing the waste heat from the engine during low demand periods, the cogeneration system can produce more than several times the standard thermal output of the diesel engine during peak demand periods. Copyright © 2001 John Wiley & Sons, Ltd.     

Thermal performance of a packed bed reactor for a high‐temperature chemical heat pump

The thermal performance of a chemical heat pump that uses the reaction system of calcium oxide/lead oxide/carbon dioxide, which is developed for utilization of high‐temperature heat above 800°C, is studied experimentally. The thermal performance of a packed‐bed reactor of a calcium oxide/carbon dioxide reaction system, which stores and transforms a high‐temperature heat source in the heat pump operation, is examined under various heat pump operation conditions. The energy analysis based on the experiment shows that it is possible to utilize high‐temperature heat with this heat pump. This heat pump can store heat above 850°C and then transform it into a heat above 900°C under an approximate atmospheric pressure. An applied system that combines the heat pump and a high‐temperature process is proposed for high‐efficiency heat utilization. The scale of the heat pump in the combined system is estimated from the experimental results. Copyright © 2001 John Wiley & Sons, Ltd.     

A life-cycle analysis on thin-film CdS/CdTe PV modules

Authors have evaluated the life cycle of a thin-film CdS/CdTe PV module to estimate the energy payback time (EPT) and the life-cycle CO₂ emissions of a residential rooftop PV system using the CdS/CdTe PV modules. The primary energy requirement for producing 1 m² of the CdS/CdTe PV module was similar to a-Si PV module at annual production scale of 100 MW. EPT was calculated at 1.7–1.1 yr, which was much shorter than the lifetime of the PV system and similar to that of a-Si PV modules. The life-cycle CO₂ emissions were also estimated at 14–9 g-C/kWh, which was less than that of electricity generated by utility companies.     

Low-loss laser diode module using a molded aspheric glass lens

The fabrication and characteristics of a 1.3-μm laser diode (LD) module for single-mode fiber using a molded aspheric glass lens is discussed. An average coupling loss of 2.2 dB with a standard deviation of less than 0.5 dB after thermal heat cycling tests was achieved. The average assembly loss was 0.24 dB. The LD module demonstrated stability during thermal and heat cycling tests from -10 to 60°C     

Crystalline Sodium Selenocarboxylates – synthesis and characterization

A series of sodium selenocarboxylates 2 were isolated from the reaction of diacyl selenides with sodium ethanolate and characterized. A convenient preparation of the sodium salts 2 by the direct reaction of acyl chlorides with sodium selenide was also established. The salts are colourless to slightly pale yellow crystals and labile towards moisture. They readily react with alkyl iodides at room temperature to give the corresponding Se-alkyl esters 3 .