Rapid evaluation of oxidation catalysis by gas sensor system: total oxidation, oxidative dehydrogenation, and selective oxidation over metal oxide catalysts

The rapid evaluation of catalysis is an indispensable technology for the success of combinatorial chemistry. A small-sized, less expensive, easily operating screening is desirable for parallel settings which dramatically shortens the evaluation time. Recent advances in gas sensors have enabled us to use them for the rapid evaluation of oxidation catalysis. Three typical catalytic oxidations over metal oxide catalysts were evaluated by gas sensor systems optimized for each catalytic system. The first one is the total oxidation of carbon monoxide in air. Five catalytic combustion-type gas sensors were used in a parallel reactor system to shorten the evaluation time. The second one is the oxidative dehydrogenation (ODH) of ethane over the mixed oxide of nickel and iron. The evaluation of the ODH catalysis was performed by a selective olefin sensor which determines the concentration of C₂H₄ in C₂H₆. The third one is the selective oxidation catalysis of propane over alkali modified Fe/SiO₂. The effluents including CO, CO₂, aldehydes and ketones in propane were analyzed by the CO, CO₂ and semiconductor-type gas sensors selective toward aldehydes and ketones. These evaluation results indicated that gas sensors have a good potential for the rapid evaluation of oxidation catalysts.     

Preparation of Morphology‐Controlled Plate‐Like Sodium Niobate Particles by Hydrothermal Synthesis

Sodium niobate (NaNbO₃) particles with plate‐like morphology and hexagonal unit cells were prepared by the hydrothermal method. The result of SEM showed that the hexagonal NaNbO₃ were characterized by plate‐like morphology with a diameter of 5–15 μm and a thickness of 1–2 μm. The crucial influences on the morphology and crystal phase of the NaNbO₃, such as concentration of [OH^?], surfactant, and K⁺:Na⁺ ratio, were established. By further calcination treatment, the plate‐like hexagonal NaNbO₃ particles could be completely transformed into perovskite structure without morphology change. The XRD and EBSD results indicate that the major face of the calcined particles is parallel to the crystallographic (001)_pc (pseudo cubic index) plane. Compared with the traditional high‐temperature molten salt method, this work provides a simpler way to prepare the template for fabricating textured ceramics.     

RADIOLYTIC DEGRADATION OF A CROWN ETHER FOR EXTRACT ABILITY OF STRONTIUM

ABSTRACT

Dicyclohexano- 18-crown-6 (DC18C6), dissolved in chloroform, 1-octanol, toluene or cyclohexane, was irradiated by ⁶⁰Co γ-rays. Radiolytic destruction of DC18C6, measured by gas chromatography, decreased in the order: chloroform > cyclohexane > 1-octanol > toluene. Distribution coefficients in the solvent extraction of strontium from nitric acid solution were measured. These distribution coefficients were minimally affected by γ-irradiation in toluene solution, but decreased with the absorbed dose in chloroform solution. It was suggested that the distribution coefficient for the liquid-liquid extraction system was influenced by radiolytic products. The effect of radiolytic products on the distribution coefficients was evaluated by considering DC18C6 remaining in the organic phase after irradiation. The distribution coefficient measured for the organic phase with radiolytic products was larger than that without radiolytic products. The radiolytic products were thus shown to contribute to the increase in the distribution coefficient.     

Effect of Ganglioside GM3 Synthase Gene Knockout on the Glycoprotein N‐Glycan Profile of Mouse Embryonic Fibroblast

The structural and clinical significance of cellular glycoproteins and glycosphingolipids (GSLs) are often separately discussed. Considering the biosynthetic pathway of glycoconjugates, glycans of cell‐surface glycoproteins and GSLs might partially share functions in maintaining cellular homeostatis. The purpose of this study is to establish a general and comprehensive glycomics protocol for cellular GSLs and N‐glycans of glycoproteins. To test the feasibility of a glycoblotting‐based protocol, whole glycans released both from GSLs and glycoproteins were profiled concurrently by using GM3 synthase‐deficient mouse embryonic fibroblast GM3(?/?). GM3(?/?) cells did not synthesize GM3 or any downstream product of GM3 synthase. Instead, expression levels of o‐series gangliosides involving GM1‐b and GD1‐α increased dramatically, whereas a‐/b‐series gangliosides were predominantly detected in wild‐type (WT) cells. We also discovered that glycoprotein N‐glycan profiles of GM3(?/?) cells are significantly altered as compared to WT cells, although GM3 synthase is responsible only for GSLs synthesis and is not associated with glycoprotein N‐glycan biosynthesis. The present approach allows for high‐throughput profiling of cellular glycomes enriched by different classes of glycoconjugates, and our results demonstrated that gene knockout of the enzymes responsible for GSL biosynthesis significantly influences the N‐glycans of glycoproteins.     

A Unique Amino Transfer Mechanism for Constructing the β‐Amino Fatty Acid Starter Unit in the Biosynthesis of the Macrolactam Antibiotic Cremimycin

Cremimycin is a 19‐membered macrolactam glycoside antibiotic based on three distinctive substructures: 1) a β‐amino fatty acid starter moiety, 2) a bicyclic macrolactam ring, and 3) a cymarose unit. To elucidate the biosynthetic machineries responsible for these three structures, the cremimycin biosynthetic gene cluster was identified. The cmi gene cluster consists of 33 open reading frames encoding eight polyketide synthases, six deoxysugar biosynthetic enzymes, and a characteristic group of five β‐amino‐acid‐transfer enzymes. Involvement of the gene cluster in cremimycin production was confirmed by a gene knockout experiment. Further, a feeding experiment demonstrated that 3‐aminononanoate is a direct precursor of cremimycin. Two characteristic enzymes of the cremimycin‐type biosynthesis were functionally characterized in vitro. The results showed that a putative thioesterase homologue, CmiS1, catalyzes the Michael addition of glycine to the β‐position of a non‐2‐enoic acid thioester, followed by hydrolysis of the thioester to give N‐carboxymethyl‐3‐aminononanoate. Subsequently, the resultant amino acid was oxidized by a putative FAD‐dependent glycine oxidase homologue, CmiS2, to produce 3‐aminononanoate and glyoxylate. This represents a unique amino transfer mechanism for β‐amino acid biosynthesis.     

Electrical Properties of Pre-Alloyed Cu-P Containing Electrically Conductive Adhesive

In this study, a pre-alloyed Cu-P powder with a trace amount of P (0.002 at.%) was used as a metallic filler in a phenolic resin-based electrically conductive adhesive (ECA). The electrical property of the Cu-P-filled ECA was investigated for long-term stability and reliability by aging at high temperature exposure at 125°C and 85°C/85% RH for 1000 h, respectively. Results showed that the electrical resistivity of the Cu-P-filled ECA could be maintained consistently low after high temperature exposure at 125°C for 1000 h or aging at 85°C/85% RH for 1000 h, compared with the rapidly increased resistivity of Cu-filled ECA over time. A significantly low final resistivity at an order of magnitude of 10^?4 Ω·cm could be maintained in Cu-P-filled ECA even after aging at 85°C/85% RH for 1000 h.     

Periodate oxidation of cellulose by homogeneous reaction

Homogeneous periodate oxidation of cellulose was achieved through methylol cellulose. The dissolution of methylol cellulose into aqueous periodate solution was followed by the gradual decomposition of methylol groups at random sites along the methylol cellulose chain. The recovery of glycol hydroxyl groups at the C₂ and C₃ positions on the glucopyranose ring during the above decomposition process caused uniform cleavage of C₂? C₃ bonds by the periodate ion. The oxidation level reached nearly 100% in 10 h. The reduced product of the resulting dialdehyde cellulose, i.e., dialcohol cellulose, resulted in mechanical properties quite different from those of conventional dialcohol cellulose. Examination of the thermal deformation and tensile properties revealed that no notable cellulose degradation occurred during the reaction. Our dialcohol cellulose gave a clear and transparent film with a flexible nature.     

Production of eicosapentaenoic acid by a recombinant marine cyanobacterium, Synechococcus sp.

The eicosapentaenoic acid (EPA) synthesis gene cluster from an EPA-producing bacterium, Shewanella sp. SCRC-2738, was cloned into a broad-host range vector, pJRD215, and then introduced into a marine cyanobacterium, Synechococcus sp. NKBG15041c, by conjugation. The transconjugant cyanobacteria produced 3.7±0.2% (2.24±0.13 mg/L) EPA (n-3) and 2.5 ±0.2% (1.49±0.06 mg/L) eicosatetraenoic acid (n-3) of the total fatty acids when the cells were cultured at 23°C at a light intensity of 1,000–1,500 Lux. The EPA and eico-satetraenoic acid contents of the cells were increased to 4.6±0.6% (3.86±1.11 mg/L) and 4.7±0.3% (3.86±0.82 mg/L), and 7.5±0.3% (1.76±0.10 mg/L) and 5.1±0.2% (1.19±0.06 mg/L) when they were cultured at low temperature (18°C) and at lower light intensity (40 Lux), respectively.     

Study on dominant mechanism of high-cycle fatigue life in 6061-T6 aluminum alloy through microanalyses of microstructurally small cracks

The mechanism controlling the fatigue life of a precipitation-hardened Al–Mg–Si alloy (6061-T6) at a high-cycle fatigue (HCF) regime of over 10⁷ cycles was investigated in detail. It was found that over 90% of the total fatigue life was occupied by the growth process of a microstructurally small crack at relatively low stress amplitude. The small crack was often found to be arrested and halted for a long period (more than 10⁶ cycles) before it began to grow again, which resulted in a significantly slow growth process. The small crack was then analyzed not only by the conventional fractography but also by the cross-sectional observation of the crack tip region using a focused ion beam and transmission electron microscopy. These observations, supplemented also by a grain orientation analysis using electron backscattered diffraction, explicitly revealed the following points: (i) the small crack growth observed on the specimen surface is primarily related to facet-type cracking that occurs exclusively at the specimen surface; (ii) the growth direction of the small crack has strong anisotropy (i.e. surface-induced growth); (iii) the facet-type cracking is related to the formation of persistent fine slip bands that accompany no structural change of the matrix. On the basis of these results, the micromechanism of small crack growth and its relation to the concept of fatigue limit at the HCF regime is discussed in detail.     

Luminescence properties of La1−χTmχTa7O19

The luminescence properties of Tm³⁺ in La_1−χTm_χTa₇O₁₉ solid solutions were examined systematically. The substitution of Tm³⁺ for La³⁺ was carried out by a decomposition reaction of nitrates involving the corresponding constituents at 1200 °C in air. X-Ray diffraction patterns of the solid solutions indicated that the crystal structure consisted of a network of (La_1−χ³⁺Tm_χ^staggered|3+, Ta⁵⁺)—O²⁻ polyhedra interstratified with a double layer of Ta⁵⁺—O²⁻ polyhedra. According to the excitation and emission spectra, the most intense emission was found near 460 nm and quenched above χ=0.14 in La_1−χTm_χTa₇O₁₉. Also, lifetime results verified that the emission could be assigned not to the transition ¹G₄ å ³H₆, but to the transition ¹D₂ å³H₄. Upon cathode ray excitation some emissions of Tm³⁺ were superimposed by a broad emission due to the clusters of Ta⁵⁺—O²⁻ polyhedra. As a result, a low dimensional arrangement of Tm³⁺ was much more preferable for getting intense emission because it reduced the energy migration between Tm³⁺ ions.