Effect of Ganglioside GM3 Synthase Gene Knockout on the Glycoprotein N‐Glycan Profile of Mouse Embryonic Fibroblast

The structural and clinical significance of cellular glycoproteins and glycosphingolipids (GSLs) are often separately discussed. Considering the biosynthetic pathway of glycoconjugates, glycans of cell‐surface glycoproteins and GSLs might partially share functions in maintaining cellular homeostatis. The purpose of this study is to establish a general and comprehensive glycomics protocol for cellular GSLs and N‐glycans of glycoproteins. To test the feasibility of a glycoblotting‐based protocol, whole glycans released both from GSLs and glycoproteins were profiled concurrently by using GM3 synthase‐deficient mouse embryonic fibroblast GM3(?/?). GM3(?/?) cells did not synthesize GM3 or any downstream product of GM3 synthase. Instead, expression levels of o‐series gangliosides involving GM1‐b and GD1‐α increased dramatically, whereas a‐/b‐series gangliosides were predominantly detected in wild‐type (WT) cells. We also discovered that glycoprotein N‐glycan profiles of GM3(?/?) cells are significantly altered as compared to WT cells, although GM3 synthase is responsible only for GSLs synthesis and is not associated with glycoprotein N‐glycan biosynthesis. The present approach allows for high‐throughput profiling of cellular glycomes enriched by different classes of glycoconjugates, and our results demonstrated that gene knockout of the enzymes responsible for GSL biosynthesis significantly influences the N‐glycans of glycoproteins.     

A Unique Amino Transfer Mechanism for Constructing the β‐Amino Fatty Acid Starter Unit in the Biosynthesis of the Macrolactam Antibiotic Cremimycin

Cremimycin is a 19‐membered macrolactam glycoside antibiotic based on three distinctive substructures: 1) a β‐amino fatty acid starter moiety, 2) a bicyclic macrolactam ring, and 3) a cymarose unit. To elucidate the biosynthetic machineries responsible for these three structures, the cremimycin biosynthetic gene cluster was identified. The cmi gene cluster consists of 33 open reading frames encoding eight polyketide synthases, six deoxysugar biosynthetic enzymes, and a characteristic group of five β‐amino‐acid‐transfer enzymes. Involvement of the gene cluster in cremimycin production was confirmed by a gene knockout experiment. Further, a feeding experiment demonstrated that 3‐aminononanoate is a direct precursor of cremimycin. Two characteristic enzymes of the cremimycin‐type biosynthesis were functionally characterized in vitro. The results showed that a putative thioesterase homologue, CmiS1, catalyzes the Michael addition of glycine to the β‐position of a non‐2‐enoic acid thioester, followed by hydrolysis of the thioester to give N‐carboxymethyl‐3‐aminononanoate. Subsequently, the resultant amino acid was oxidized by a putative FAD‐dependent glycine oxidase homologue, CmiS2, to produce 3‐aminononanoate and glyoxylate. This represents a unique amino transfer mechanism for β‐amino acid biosynthesis.     

Electrical Properties of Pre-Alloyed Cu-P Containing Electrically Conductive Adhesive

In this study, a pre-alloyed Cu-P powder with a trace amount of P (0.002 at.%) was used as a metallic filler in a phenolic resin-based electrically conductive adhesive (ECA). The electrical property of the Cu-P-filled ECA was investigated for long-term stability and reliability by aging at high temperature exposure at 125°C and 85°C/85% RH for 1000 h, respectively. Results showed that the electrical resistivity of the Cu-P-filled ECA could be maintained consistently low after high temperature exposure at 125°C for 1000 h or aging at 85°C/85% RH for 1000 h, compared with the rapidly increased resistivity of Cu-filled ECA over time. A significantly low final resistivity at an order of magnitude of 10^?4 Ω·cm could be maintained in Cu-P-filled ECA even after aging at 85°C/85% RH for 1000 h.     

RADIOLYTIC DEGRADATION OF A CROWN ETHER FOR EXTRACT ABILITY OF STRONTIUM

ABSTRACT

Dicyclohexano- 18-crown-6 (DC18C6), dissolved in chloroform, 1-octanol, toluene or cyclohexane, was irradiated by ⁶⁰Co γ-rays. Radiolytic destruction of DC18C6, measured by gas chromatography, decreased in the order: chloroform > cyclohexane > 1-octanol > toluene. Distribution coefficients in the solvent extraction of strontium from nitric acid solution were measured. These distribution coefficients were minimally affected by γ-irradiation in toluene solution, but decreased with the absorbed dose in chloroform solution. It was suggested that the distribution coefficient for the liquid-liquid extraction system was influenced by radiolytic products. The effect of radiolytic products on the distribution coefficients was evaluated by considering DC18C6 remaining in the organic phase after irradiation. The distribution coefficient measured for the organic phase with radiolytic products was larger than that without radiolytic products. The radiolytic products were thus shown to contribute to the increase in the distribution coefficient.     

EFFECT OF INFRARED IRRADIATION ON DRYING CHARACTERISTICS OF WET POROUS MATERIALS

ABSTRACT

We studied infrared drying characteristics of wet porous materials by comparison with the convective drying characteristics, and our attention was focused on the factors influencing their characteristics. By selecting three kinds of membrane filters, we examined the influences of the mean pore diameter and the spectral distribution of irradiation power as variables using a far-infrared heater and a near-infrared heater. The differences between the infrared and convective drying characteristics (drying rate, sample temperature, water content distribution) were experimentally obtained, and the influence of mean pore diameter of the sample on its drying characteristics was observed only in infrared drying but in convective drying. By measuring the diffuse transmittance of the membrane filter in consideration of the drying process, we deliberated that infrared radiation penetrating into the drying sample was absorbed directly by the water in the voids, and that the water vaporized there.     

Immunomodulatory Properties and Osteogenic Activity of Polyetheretherketone Coated with Titanate Nanonetwork Structures

Polyetheretherketone (PEEK) is a potential substitute for conventional metallic biomedical implants owing to its superior mechanical and chemical properties, as well as biocompatibility. However, its inherent bio-inertness and poor osseointegration limit its use in clinical applications. Herein, thin titanium films were deposited on the PEEK substrate by plasma sputtering, and porous nanonetwork structures were incorporated on the PEEK surface by alkali treatment (PEEK-TNS). Changes in the physical and chemical characteristics of the PEEK surface were analyzed to establish the interactions with cell behaviors. The osteoimmunomodulatory properties were evaluated using macrophage cells and osteoblast lineage cells. The functionalized nanostructured surface of PEEK-TNS effectively promoted initial cell adhesion and proliferation, suppressed inflammatory responses, and induced macrophages to anti-inflammatory M2 polarization. Compared with PEEK, PEEK-TNS provided a more beneficial osteoimmune environment, including increased levels of osteogenic, angiogenic, and fibrogenic gene expression, and balanced osteoclast activities. Furthermore, the crosstalk between macrophages and osteoblast cells showed that PEEK-TNS could provide favorable osteoimmunodulatory environment for bone regeneration. PEEK-TNS exhibited high osteogenic activity, as indicated by alkaline phosphatase activity, osteogenic factor production, and the osteogenesis/osteoclastogenesis-related gene expression of osteoblasts. The study establishes that the fabrication of titanate nanonetwork structures on PEEK surfaces could extract an adequate immune response and favorable osteogenesis for functional bone regeneration. Furthermore, it indicates the potential of PEEK-TNS in implant applications.     

Characterization of anisotropic gas permeability and thermomechanical properties of highly textured porous alumina

Porous alumina with a highly textured microstructure was fabricated by pulse electric current sintering (PECS) using alumina platelets. Highly oriented porous alumina with a porosity of 3%–50% was obtained by a pressure-controlled method of PECS. The properties of the highly textured porous alumina were measured in two directions. The nitrogen gas permeance and thermal conductivity at room temperature were higher in the direction along the platelet length due to the higher continuity of pores and the connectivity of alumina platelets, respectively. The anisotropy of the thermal conductivity at room temperature was investigated and explained by the effect of grain size of platelets as well as morphology and orientation of pores. The bending strength was higher with the loading direction along the platelet thickness. The thermal shock strength was clearly different in the two directions. The difference in the thermal shock strength was investigated by the measurement of properties and thermal stress analysis.     

Low-temperature hydrodechlorination of chlorobenzenes on platinum-supported alumina catalysts

Hydrodechlorination of chlorobenzenes on platinum (Pt)-supported γ-alumina and alumina Lewis superacid (AmLSA) catalysts was carried out at room temperature and ambient pressure using a fixed bed flow reactor and a semi-batch reactor. Both the catalysts indicated good activity for the hydrodechlorination, but the former was superior to the latter. The hydrodechlorinations of reactants C₆H_6−xCl_x (x=1, 2, 3) proceeded step-wisely to benzene and then cyclohexane via C₆H_6−yCl_y (y=x−1). The reactions seem to be promoted by the contribution of spillover hydrogen formed on the Pt-supported catalysts. The catalysts deactivated with reaction time and the amount of chlorine that accumulated on the Pt-supported γ-alumina catalyst in the hydrodechlorination of 1,4-dichlorobenzene for 3 h was near to that estimated from the converted reactant molecules. When the deactivated catalysts were treated in a stream of hydrogen above 503 K, the original activity was completely restored, but the deactivation phenomenon with reaction time was observed again.     

Fabrication and Pore Size Control of Large-Pore Mesoporous Silica Particles through a Solvent Evaporation Process

Large-pore mesoporous silica particles were synthesized through a solvent evaporation process using hydrophobic fumed silica particles and tetraethyl orthosilicate (TEOS) as silica sources. The solvent evaporation of an ethanol solution of fumed silica particles, TEOS, HCl and triblock copolymer (F127) resulted in mesoporous silica particles with pores with sizes of about 7 nm. In addition, the interplanar spacing of the mesoporous silica particles can be controlled by changing the solvent evaporation temperatures.