Luminescence properties of La1−χTmχTa7O19

The luminescence properties of Tm³⁺ in La_1−χTm_χTa₇O₁₉ solid solutions were examined systematically. The substitution of Tm³⁺ for La³⁺ was carried out by a decomposition reaction of nitrates involving the corresponding constituents at 1200 °C in air. X-Ray diffraction patterns of the solid solutions indicated that the crystal structure consisted of a network of (La_1−χ³⁺Tm_χ^staggered|3+, Ta⁵⁺)—O²⁻ polyhedra interstratified with a double layer of Ta⁵⁺—O²⁻ polyhedra. According to the excitation and emission spectra, the most intense emission was found near 460 nm and quenched above χ=0.14 in La_1−χTm_χTa₇O₁₉. Also, lifetime results verified that the emission could be assigned not to the transition ¹G₄ å ³H₆, but to the transition ¹D₂ å³H₄. Upon cathode ray excitation some emissions of Tm³⁺ were superimposed by a broad emission due to the clusters of Ta⁵⁺—O²⁻ polyhedra. As a result, a low dimensional arrangement of Tm³⁺ was much more preferable for getting intense emission because it reduced the energy migration between Tm³⁺ ions.     

Magnetic field-assisted finishing for micropore X-ray focusing mirrors fabricated by deep reactive ion etching

A magnetic field-assisted finishing process has been studied for high-aspect-ratio ion-etched silicon curvilinear micropore structures, which have potential application as mirrors for satellite-borne X-ray telescopes. The micropore sidewalls act as X-ray focusing mirrors, and lead to reductions in the mass-to-effective-area ratio of 10-1000 times, compared to traditional X-ray telescopes. This paper describes the processing principle for the surface finishing of the sidewalls of micropore structures (10, 20 μm and depth: 300 μm (aspect ratio ≈ 15, 30)), and the feasibility of achieving roughness ∼4 nm rms and improving the X-ray reflectivity of micropore sidewall surface are demonstrated.     

Study on dominant mechanism of high-cycle fatigue life in 6061-T6 aluminum alloy through microanalyses of microstructurally small cracks

The mechanism controlling the fatigue life of a precipitation-hardened Al–Mg–Si alloy (6061-T6) at a high-cycle fatigue (HCF) regime of over 10⁷ cycles was investigated in detail. It was found that over 90% of the total fatigue life was occupied by the growth process of a microstructurally small crack at relatively low stress amplitude. The small crack was often found to be arrested and halted for a long period (more than 10⁶ cycles) before it began to grow again, which resulted in a significantly slow growth process. The small crack was then analyzed not only by the conventional fractography but also by the cross-sectional observation of the crack tip region using a focused ion beam and transmission electron microscopy. These observations, supplemented also by a grain orientation analysis using electron backscattered diffraction, explicitly revealed the following points: (i) the small crack growth observed on the specimen surface is primarily related to facet-type cracking that occurs exclusively at the specimen surface; (ii) the growth direction of the small crack has strong anisotropy (i.e. surface-induced growth); (iii) the facet-type cracking is related to the formation of persistent fine slip bands that accompany no structural change of the matrix. On the basis of these results, the micromechanism of small crack growth and its relation to the concept of fatigue limit at the HCF regime is discussed in detail.     

Formation Mechanism and Synthesis of Apatite-Type Structure Ba2+xLa8−x(SiO4)6O2−δ

The formation process of Ba₂La₈(SiO₄)₆O₂ was clarified using thermogravimetry–differential thermal analysis (TG-DTA) and a high-temperature powder X-ray diffraction (HT-XRD) method. Phase changes identified from the HT-XRD data surprisingly corresponded to the weight loss and/or endothermic peaks observed in the TG-DTA curves. Raw material with the composition Ba₂La₈(SiO₄)₆O₂ was completely reacted at 1400°C and produced only an apatite-type compound without a secondary phase. Moreover, the synthesis of Ba_{2+ x} La_{8− x} (SiO₄)₆O_2−δ crystals with x = 0–2 was attempted using a solid-state reaction.     

Periodate oxidation of cellulose by homogeneous reaction

Homogeneous periodate oxidation of cellulose was achieved through methylol cellulose. The dissolution of methylol cellulose into aqueous periodate solution was followed by the gradual decomposition of methylol groups at random sites along the methylol cellulose chain. The recovery of glycol hydroxyl groups at the C₂ and C₃ positions on the glucopyranose ring during the above decomposition process caused uniform cleavage of C₂? C₃ bonds by the periodate ion. The oxidation level reached nearly 100% in 10 h. The reduced product of the resulting dialdehyde cellulose, i.e., dialcohol cellulose, resulted in mechanical properties quite different from those of conventional dialcohol cellulose. Examination of the thermal deformation and tensile properties revealed that no notable cellulose degradation occurred during the reaction. Our dialcohol cellulose gave a clear and transparent film with a flexible nature.     

Incorporation of a well-defined polyether side-chain into segmented poly(ether-urethane urea) and examination for blood-compatibility

A new method of introducing a hydrophilic polyether side chain into segmented polyurethane using a polypropylene oxide macromer with 1,3-diol at one chain-end, which behaves as chain extender, is described. In this procedure, a molecular-designed side-chain is incorporated quantitatively and directly into polyurethane biomedical elastomer. The design is also of interest to biomaterials in artificial organs.     

Production of eicosapentaenoic acid by a recombinant marine cyanobacterium, Synechococcus sp.

The eicosapentaenoic acid (EPA) synthesis gene cluster from an EPA-producing bacterium, Shewanella sp. SCRC-2738, was cloned into a broad-host range vector, pJRD215, and then introduced into a marine cyanobacterium, Synechococcus sp. NKBG15041c, by conjugation. The transconjugant cyanobacteria produced 3.7±0.2% (2.24±0.13 mg/L) EPA (n-3) and 2.5 ±0.2% (1.49±0.06 mg/L) eicosatetraenoic acid (n-3) of the total fatty acids when the cells were cultured at 23°C at a light intensity of 1,000–1,500 Lux. The EPA and eico-satetraenoic acid contents of the cells were increased to 4.6±0.6% (3.86±1.11 mg/L) and 4.7±0.3% (3.86±0.82 mg/L), and 7.5±0.3% (1.76±0.10 mg/L) and 5.1±0.2% (1.19±0.06 mg/L) when they were cultured at low temperature (18°C) and at lower light intensity (40 Lux), respectively.     

A negative resist for KrF excimer laser lithography

The design and preparation of a series of negative resists for KrF excimer laser lithography are described. Each resist is composed of poly(hydroxystyrene) and an aromatic azide. The base resin shows high transmittance of 62%/μm at 248 nm, when p-ethylphenyl p-azidophenylsulfonate. 4-azido-4α-methoxy-chalcone, 1-(4 azidobenzylidene)-3-(α-hydroxy-4-azidobenzyl)-indene, 4,4α-diazido-3,3α-dimethoxybiphenyl, or 1-(4-azidostyryl)-5, 5-dimethyl-2-cyclohexen-1-one is employed as a sensitizer. These azides are obtained by red-shifting the absorption maxima to lower energy regions than the exposing wavelength of 248 nm. Transmittance of resists can be controlled from 10 to 30%. The resist is exposed with a KrF excimer laser stepper and developed in an alkaline solution. Sensitivities of about 15 mJ/cm² are observed. A good, subhalf-micron resist profile is achieved. The photochemical reaction mechanisms of poly(hydroxystyrene) and 4,4α-diazido-3,3α-dimethoxybiphenyl were studied at 248 nm and 313 nm exposure. Quantum yield for photodecomposition at 248 nm is seven times larger than that at 313 nm, but dissolution-inhibition effects are larger at 313 nm exposure. Consequently, the resist shows higher sensitivity at 313 nm than at 248 nm.     

Gravity consolidation-sedimentation behaviors of concentrated TiO2 suspension

Consolidation-sedimentation behaviors of consolidated sediment under action of gravity were investigated using highly concentrated suspension of titanium dioxide particles under conditions of various pHs, initial heights, and initial concentrations. The average consolidation ratio of the consolidated sediment was analyzed on the basis of the simplified analytical solution obtained using the modified Terzaghi's model under the moving Lagrangian coordinate system. Although the solution pH strongly affects consolidation-sedimentation behaviors, the modified average consolidation coefficient was little influenced by the solution pH. Also, the consolidation coefficient increased in almost direct proportion to the total volume of solids per unit cross-sectional area, which changes the driving force of consolidation-sedimentation due to the overlying weight of the solid particles. The variations with time of the height of the consolidated sediment were adequately described using the analytical solution describing the average consolidation ratio with the aid of the relation that the equilibrium height was represented by a power function of the total volume of solids for a specified pH.     

Active Polymer Gel Actuators

Many kinds of stimuli-responsive polymer and gels have been developed and applied to biomimetic actuators or artificial muscles. Electroactive polymers that change shape when stimulated electrically seem to be particularly promising. In all cases, however, the mechanical motion is driven by external stimuli, for example, reversing the direction of electric field. On the other hand, many living organisms can generate an autonomous motion without external driving stimuli like self-beating of heart muscles. Here we show a novel biomimetic gel actuator that can walk spontaneously with a worm-like motion without switching of external stimuli. The self-oscillating motion is produced by dissipating chemical energy of oscillating reaction. Although the gel is completely composed of synthetic polymer, it shows autonomous motion as if it were alive.