深基坑工程动态施工反演分析与变形预报

提出了动态施工反演分析的思想，即在常规的反分析过程中引入逐步开挖和逐道支撑的动态施工因素，以求仿真模拟工程实际情况，进而为相继施工阶段的变形预报提供可靠保证。文中基于任意施工阶段间围护墙体变形与内支撑梁轴力的增量测值和施工ＦＥＭ优化反演分析法，反推了各土层的弹性模量系数，给出了作用在墙体两侧的土压力分布，并预报各相继施工阶段的墙体和土体变形、内力及内支撑梁轴力。     

Effect of Storage Conditions on 2–Acetyl-1–pyrroline Content in Aromatic Rice Variety, Khao Dawk Mali 105

ABSTRACT: The effect of package and temperature on 2–acetyl-1–pyrroline content in milled aromatic rice during storage was investigated. 2 -Acetyl-1 -pyrroline content was decreased faster at higher storage temperature. However, fat acidity of rice was increased during storage and inversely correlated with 2–acetyl-1–pyrroline content at an early stage of storage. The difference in 2–acetyl-1 -pyrroline recovery from the samples, which were extracted with ethanol at 40 °C and 75 °C, revealed that the starch bound and free forms of 2–acetyl-1–pyrroline may occur in aromatic rice. These results suggested that the biosynthesis of 2–acetyl-1 -pyrroline before starch structure formation in rice kernel could play a key role in the aroma quality of aromatic rice.     

Relationship between local structure and stability in hen egg white lysozyme mutant with alanine substituted for glycine

We prepared five mutant lysozymes in which glycines whose dihedralangles are located in the region of the left-handed helix, Gly49,Gly67, Gly71, Gly102 and Gly117, were mutated to an alanineresidue. From analyses of their thermal stabilities using differentialscanning calorimetry, most of them were more destabilized thanthe native lysozyme, except for the G102A mutant, which hasa stability similar to that of the native lysozyme at pH 2.7.As for the destabilized mutant lysozymes, their X-ray crystallographicanalyses showed that their global structures did not changebut that the local structures changed slightly. By examiningthe dihedral angles at the mutation sites based on X-ray crystallographicresults, it was found that the dihedral angles at these mutationsites tended to adopt favorable values in a Ramachandran plotand that the extent and direction of their shifts from the originalvalue had similar tendencies. Therefore, the change in dihedralangles may be the cause of the slight local structural changesaround the mutation site. On the other hand, regarding the mutationof G102A, the global structure was almost identical with thatof the native structure but the local structure was drasticallychanged. Therefore, it was suggested that the drastic localconformational change might be effective in releasing the unfavorableinteraction of the native state at the mutation site.     

超声波探头位置对Al-5.7%Cu铸锭凝固组织的影响

研究了超声波探头位置变化对Al-5.7%Cu合金铸锭凝固组织的影响,考察了探头水平位置变化对等轴晶占有率的影响,探讨了超声波作用下晶粒细化机理。结果表明:当探头浸入深度相同且位于铸型中心线时,得到的细等轴晶区最大,且呈对称分布;当探头的位置贴近铸型壁时,细等轴晶区向探头端面附近集中并缩减,柱状晶区进一步扩大。超声波的细化效果来自于声空化造成微区瞬时过冷,以及动态形核;而声流造成凝固的枝晶破碎,提供结晶核心。     

Effects of PbTiO 3 Seed Layer on the Characteristics of RF-Sputtered Pb(Zr 0.5 ,Ti 0.5 )O 3 Thin Films

The effects of seed layers on the characteristics of rf-sputtered lead zirconium titanate thin films were investigated. Prior to sputtering, PbTiO 3 seed layers (100 nm) were deposited onto the Pt/Ti/Si and Pt/Si substrates by sol-gel (spin coating) processing method. Structure-property relation was studied as functions of substrate temperature and sputtering conditions. Special efforts were given in optimizing the deposition parameters to prepare the films in the perovskite phase without post deposition annealing. Dielectric constant and loss tangent of the films were in the range 800-950 and 0.04 -0.06, respectively. Remanent polarization and coercive field were 23.1 w C/cm 2 and 75kV/cm, respectively, for the films without PbTiO 3 seed layer, where as the corresponding quantities for in situ -deposited perovskite Pb(Zr, Ti)O 3 films on PbTiO 3 seed layer were 28 w C/cm 2 and 65 kV/cm, respectively.     

Fabrication and operation limit of lead-free PTCR ceramics using BaTiO3–(Bi1/2Na1/2)TiO3 system

The electric properties of BaTiO₃–(Bi_1/2Na_1/2)TiO₃ (BT–BNT) solid solution ceramics were studied as a lead-free PTCR (positive temperature coefficient of resistivity) thermistor material usable over 130°C. For determining the maximum switching temperature T _s, the phase diagram of BT–BNT binary system was clarified. Two semiconductorization processes and their electric properties are described. The lanthanum(La)-doped BBNT ceramics sintered in air still showed dielectric behaviors, but the niobium(Nb)-doped ones had a low resistivity at room temperature, ρ _RT, on the order of 10³ Ωcm and showed a PTC behavior. Sintering under a low O₂ atmosphere produces BT–BNT ceramics with less than 10² Ωcm compared to those prepared in air. Our current research produced the BBNT ceramics with T _s values around 210°C by increasing the (Bi_1/2Na_1/2) content in the ceramics.     

Rapid evaluation of oxidation catalysis by gas sensor system: total oxidation, oxidative dehydrogenation, and selective oxidation over metal oxide catalysts

The rapid evaluation of catalysis is an indispensable technology for the success of combinatorial chemistry. A small-sized, less expensive, easily operating screening is desirable for parallel settings which dramatically shortens the evaluation time. Recent advances in gas sensors have enabled us to use them for the rapid evaluation of oxidation catalysis. Three typical catalytic oxidations over metal oxide catalysts were evaluated by gas sensor systems optimized for each catalytic system. The first one is the total oxidation of carbon monoxide in air. Five catalytic combustion-type gas sensors were used in a parallel reactor system to shorten the evaluation time. The second one is the oxidative dehydrogenation (ODH) of ethane over the mixed oxide of nickel and iron. The evaluation of the ODH catalysis was performed by a selective olefin sensor which determines the concentration of C₂H₄ in C₂H₆. The third one is the selective oxidation catalysis of propane over alkali modified Fe/SiO₂. The effluents including CO, CO₂, aldehydes and ketones in propane were analyzed by the CO, CO₂ and semiconductor-type gas sensors selective toward aldehydes and ketones. These evaluation results indicated that gas sensors have a good potential for the rapid evaluation of oxidation catalysts.     

A TEM study on melt-crystallized poly(butylene terephthalate)

A study was made to investigate an optimum condition for ruthenium tetraoxide staining of poly(butylene terephthalate) (PBT) with glass transition temperature as low as ca. 23 degrees C for TEM observation of melt-grown PBT crystals. The morphological study of ultrathin sections prepared based on optimum staining at 25 degrees C for 8 h revealed formation of fringed-micellar crystal nuclei in the early stage and folded-chain fringed-micellar crystals in the later stage of isothermal crystallization at 40 degrees C from melt. The fraction of chain-folded crystals increased with increasing crystallization temperature from the quantitative analysis of crystal thickness in comparison with the reported morphology using the replica method.     

Enhancement of bonding strength by graded structure at interface between apatite layer and bioactive tantalum metal

Tantalum metal is a candidate for use as an implant material in high load-bearing bony defects, due to its attractive features such as high fracture toughness and high workability. This metal, however, does not have bone-bonding ability, i.e. bioactivity, and therefore the development of bioactive tantalum metal is highly desirable. It is known that the essential prerequisite for an artificial material to show bioactivity is to form a bonelike apatite layer on its surface in the body environment. The same type of apatite layer is formed in a simulated body fluid (SBF) with inorganic ion concentrations nearly equal to those of human blood plasma. The present authors previously showed that the apatite formation on tantalum metal in SBF was remarkably accelerated by treatment with 0.5 M-NaOH aqueous solution and subsequent firing at 300 °C, while untreated tantalum metal spontaneously formed the same apatite after a long soaking period. In the present study, the bonding strength of the apatite layer to the substrate was quantitatively evaluated in comparison with that to the untreated tantalum metal. Adhesive strength was measured as an estimation of bonding strength, and the surface microstructure of both the substrates was characterized in order to discuss the difference in the bonding strength in terms of surface structure. The apatite layer formed on the NaOH- and heat-treated tantalum metal shows higher adhesive strength than that formed on the untreated metal. The amorphous sodium tantalate layer formed on the tantalum metal by NaOH and heat treatments, has a smooth graded structure where its concentration gradually changes from the surface into the interior metal. Smooth graded structure with complex of apatite is constructed after soaking in SBF. The higher bonding strength of the apatite layer formed on the treated metal is attributed to its smooth graded structure.