Selective catalytic reduction of NO by hydrocarbons on Ga2O3/Al2O3 catalysts

Catalytic properties of supported gallium oxides have been examined for the selective reduction of NO by CH₄ in excess oxygen. The activity was greatly affected by the support; Ga₂O₃/Al₂O₃ (Al₂O₃ supported Ga₂O₃) and Ga₂O₃–Al₂O₃ mixed oxide exhibited high activity and selectivity as comparable to Ga-ZSM-5, while unsupported Ga₂O₃ and the other supported Ga₂O₃ were ineffective. For Ga₂O₃/Al₂O₃, the activity changed with Ga₂O₃ content, and was highest at about 30 wt% Ga₂O₃, which corresponds to a theoretical monolayer coverage. Gallium oxide highly dispersed on Al₂O₃ is considered to be responsible for the high activity and selectivity. The reaction characteristics of Ga₂O₃/Al₂O₃ were studied and compared with Ga-ZSM-5 and Co-ZSM-5. Ga₂O₃/Al₂O₃ exhibited the highest activity and selectivity at high temperature. In addition, Ga₂O₃/Al₂O₃ showed higher tolerance against water than Ga-ZSM-5. C₃H₈ and C₃H₆ were also evaluated as reducing agents, and Ga₂O₃/Al₂O₃ showed higher activity than Ga-ZSM-5 above 723 K achieving almost complete reduction of NO to N₂.     

Oxidation state of palladium as a factor controlling catalytic activity of Pd/SiO2–Al2O3 in propane combustion

The oxidation state of palladium on SiO₂–Al₂O₃ used for propane combustion was examined by XPS and XRD, and the correlation of the catalytic activity with the oxidation state of palladium was systematically studied. The propane conversion over 5 wt% Pd/SiO₂–Al₂O₃ was measured in the range 1.0≤S≤7.2 (S is defined as [O₂]/5[C₃H₈] based on stoichiometric ratio). The propane conversion strongly depended on the S value and reached the maximum at S=5.5. The oxidation state of palladium also changed with the S value; palladium particles were more oxidized under the reaction mixture of higher S value. On the sample used for the reaction at S=5.5, both of metallic palladium and palladium oxide were found. It is concluded that partially oxidized palladium which has optimum ratio of metallic palladium to palladium oxide shows the highest catalytic activity in propane combustion.     

Catalytic transfer hydrogenation on a hydrogen-absorbing alloy (CaNi5) using hydriding–dehydriding properties

By using the characteristics of a hydrogen-absorbing alloy, the hydrogen produced by catalytic dehydrogenation of saturated compounds can be absorbed to form metal hydrides, and, vice versa, the resulting metal hydrides are able to hydrogenate efficiently unsaturated compounds upon dehydriding. Gas-phase reactions between 2-butene and 2-propanol on a hydrogen-absorbing alloy CaNi₅ have been studied in the temperature range of 393–473 K. CaNi₅ showed interesting characteristics as an active catalyst for the catalytic transfer hydrogenation of butene from propanol as a hydrogen donor. 2-propanol was effectively dehydrogenated at 423 K to yield acetone in which the dissociated hydrogen was completely absorbed by CaNi₅ to form the metal hydride. When the alloy was hydrided to some extent, butene was hydrogenated by the absorbed hydrogen in the metal hydride to produce butane. The overall reaction on CaNi₅ was expressed as catalytic transfer hydrogenation of 2-butene from 2-propanol through intermediate formation of metal hydrides, rather than the direct reaction between butene and propanol on the alloy. Thus, CaNi₅ effectively repeated hydriding–dehydriding cycles: hydriding of CaNi₅ by 2-propanol dehydrogenation with subsequent dehydriding for the hydrogenation of 2-butene. The use of hydrogen-absorbing CaNi₅ provides a novel reaction system for the catalytic transfer hydrogenation. This revised version was published online in July 2006 with corrections to the Cover Date.     

Selective catalytic reduction of nitrogen oxides with hydrocarbons over Zn–Al–Ga complex oxides

Selective reduction of NO with hydrocarbons was studied using metal oxide catalysts having a spinel structure. A Zn–Al–Ga complex oxide was found to be very active and selective for the catalytic reduction of NO with both C₃H₆ and CH₄. It was revealed that the role of oxygen at the initial stage of the reaction strongly depends on the reductants; oxygen is mainly used for NO oxidation to NO₂ in the reduction with CH₄, whereas it is used both for NO oxidation to NO₂ and oxidation of C₃H₆ to an active intermediate in the reduction with C₃H₆. This revised version was published online in July 2006 with corrections to the Cover Date.     

Activity measurement of gallium in the B2 phase of the CoGa–Sb system by the EMF method with zirconia-based solid electrolyte

Gallium activity in the B2 phase regions of both binary Co–Ga and ternary Co–Ga–Sb systems was measured by EMF method with stabilized zirconia solid electrolyte The temperature range was 1073–1273 K and Sb concentrations were 1, 2 and 3 mol fractions. Ga activity at 1173 and 1273 K increases sharply in Ga rich region and the addition of Sb to the CoGa phase increases Ga activity. Activity change corresponds to the lattice parameter change with Sb addition to the CoGa phase.     

Parallel processing circuit of line image using neuristor

A simultaneous detecting circuit system of centers and lengths of some lines in one dimension is presented applying an electronic circuit model of the nervous axon with respect to signal transmission. This model consists of series of one basic section, and has functions of Neuristor. The circuit system has a paralell processing function. It is constructed by three layers. In the first layer each visual signal of lines is changed to electric pulse signal. In the second layer edges of each line are detected, and in the third layer these detected signals are converted into voltages which correspond to lengths of the lines. These functions were confirmed experimentally using its hardware.     

Influence of temperature on growth of Legionella pneumophila biofilm determined by precise temperature gradient incubator

Bacterial growth is influenced by several different culture conditions. Temperature is one of an essential component which regulates bacterial growth and their morphology. The influence of temperature on the length of bacteria was investigated in broth and on agar in a temperature range from 30.0 degrees C to 47.0 degrees C in 0.5 degrees C steps using a newly developed temperature gradient incubator. The incubator is able to reach a set temperature within 2 h and maintain temperature as accurate as +/-0.1 degrees C of the set temperature. Three Legionella pneumophila serotype 1 strains were incubated for 48 h in BCYE-alpha agar at various temperatures ranging from 30.0 degrees C to 48.0 degrees C and length of bacteria grown at each temperature was microscopically measured. Ability of bacteria to multiply at a given temperature was also determined. L. pneumophila serotype 1 strains ATCC 33152, a clinical isolate Okinawa 02-001 were going to elongate to longer than 100 mum when cultured higher than at 39.5 degrees C and at 41.5 degrees C, respectively. Each strain was unable to multiply when cultured higher than at 44.2 degrees C (ATCC 33152) or at 44.0 degrees C (Okinawa 02-001). Those data would provide insights for establishing regulations in terms of maintaining hot water temperature in a facility where a circulating hot water supply-system is available and contamination with Legionella spp. is likely to happen.     

Three Basic Theorems in Numerical Analysis in Control Engineering Course and Their Application

International Journal of Control, Automation and Systems - Control system design packages like MATLAB, SICLAB, OCTAVE, etc. have become essential components of both undergraduate and graduate...