Chemiluminescence detection for a microchip capillary electrophoresis system fabricated in poly(dimethylsiloxane)

Chemiluminescence (CL) detection integrated with a microchip capillary electrophoresis (MCE) system that was fabricated in poly(dimethylsiloxane) was demonstrated for chemical and biochemical analyses. Two model CL systems were involved here: metal ion-catalyzed luminol-peroxide reaction and dansyl species conjugated peroxalate-peroxide reaction. Different strategies based on three chip patterns (cross, cross combining with Y, and cross combining with V) to perform on-line CL detection for MCE were evaluated and compared in terms of sensitivity, reproducibility, and peak symmetry. The chip pattern of cross combining with Y proved to be promising for the luminol-peroxide CL system, while the chip pattern of cross combining with V was preferred for the peroxalate-peroxide system where CL reagent could not be effectively transported by electroosmotic flow. A detection limit down to submicromolar concentrations (midattomole) was achieved with good reproducibility and symmetric peak shape. Successful separation of three metal cations such as Cr(III), Co(II), and Cu(II) and chiral recognition of dansyl phenylalanine enantiomers within 1 min revealed distinct advantages of combining MCE with CL detection for rapid and sensitive analyses.     

Piezoelectric properties in (K0.5Bi0.5)TiO3-(Na0.5Bi0.5)TiO3-BaTiO3 lead-free ceramics.

Lead-free piezoelectric ceramics with compositions around the morphotropic phase boundary (MPB) x(Na0.5Bi0.5)TiO3-y(K0.5Bi0.5)TiO3-zBaTiO3 [x + y + z = 1; y:z = 2:1] were synthesized using conventional, solid-state processing. Dielectric maximum temperatures of 280 degrees C and 262 degrees C were found for tetragonal 0.79(Na0.5Bi0.5)TiO3-0.14(K0.5Bi0.5)TiO3-0.07BaTiO3 (BNBK79) and MPB composition 0.88(Na0.5Bi0.5)TiO3-0.08(K0.5Bi0.5)TiO3-0.04BaTiO3 (BNBK88), with depolarization temperatures of 224 degrees C and 162 degrees C, respectively. Piezoelectric coefficients d33 were found to be 135 pC/N and 170 pC/N for BNBK79 and BNBK88, and the piezoelectric d31 was determined to be -37 pC/N and -51 pC/N, demonstrating strong anisotropy. Coercive field values were found to be 37 kV/cm and 29 kV/cm for BNBK79 and BNBK88, respectively. The remanent polarization of BNBK88 (approximately 40 microC/cm2) was larger than that of BNBK79 (approximately 29 microC/cm2). The piezoelectric, electromechanical, and high-field strain behaviors also were studied as a function of temperature and discussed.     

Fabrication of X-rays mask with carbon membrane for diffraction gratings

We have produced diffraction gratings for obtaining high resolution X-ray phase imaging, such as X-ray Talbot interferometer. These diffraction gratings were required to have a fine, high accuracy, high aspect ratio structure. Therefore, we decided to use the X-rays lithography technique that used synchrotron radiation of the directivity for a manufacture process. The accuracy of the completed structure depends largely on the accuracy of the X-ray mask. In our group, a resin material is conventionally used for the membrane of large X-ray masks. However, X-ray masks comprising a resin membrane have the disadvantage that, after several cycles of X-ray exposure, they crease and sag due to X-ray-derived heat. As a substitute for the conventional resin membrane, we experimentally fabricated a new X-ray mask using a carbon wafer membrane. The newly fabricated X-ray mask was subjected to X-ray exposure experiment. We succeeded in making the structure body which was almost shape. And the experimental results verified that the new mask did not deteriorate even when used repeatedly, demonstrating that it was highly durable.     

Carbon Dioxide Sensor Mechanism of Porous Hydroxyapatite Ceramics

Hydroxyapatite and Cl⁻ -containing hydroxyapatite powders are prepared and characterized. Reversible substitution of CO^2-₃ for OH⁻ at the surface is presumed to be responsible for the sensor function. The role of Cl⁻, which is necessary to realize the sensor function and is incorporated during soaking treatment, is considered as follows. It may reduce the strain caused by the incorporation of CO^2-₃ (which is larger than OH⁻), and, hence, promote the reversible substitution reaction. This behavior is presumed because Cl⁻ -containing hydroxyapatite samples exhibit sensor characteristics typical of CO₂ without any treatment.     

细化钢铁材料晶粒的原理与方法

细化晶粒是控制金属材料组织结构的最重要、最基本的方法,目前,实际应用的成块材料可获得的最细的铁素体晶粒约为5μm。获得细晶粒的方法有利用相变和再结晶的热处理（或形变热处理）,钢液超速冷却,机械合金化,超细粒子烧结和非晶体结晶等。形变热处理对晶粒细化极为有效,已以实验室规模获得了具有小于或等于1μm的超细晶组织的成块材料。本文以形变热处理为中心,介绍了控制轧制、加速冷却的形变热处理（TMCP）,以及形成微细双相组织、亚晶大角度化等细化晶粒的方法,从金相学角度阐述了细化晶粒的原理和方法的现状及最新进展。     

Distribution of double bonds in thermally degraded polyisobutylene

The distribution of double bonds in thermally degraded polyisobutylene was determined quantitatively by using pulsed Fourier transform ¹H n.m.r. spectroscopic analysis. The double bonds in the degraded polymer did not exist in the interior but at the terminal positions of the polymer chain. These olefins were of the terminal trisubstituted and terminal vinylidene types. The content of the former was much greater than that of the latter. This shows that radical chain transfer predominantly occurs at the methylene hydrogen rather than at the methyl groups of the polymer chain. The average number of double bonds per molecule, f, was greater than 1 and tended to be near 2. Thereby most of the degraded polyisobutylene was shown to have two terminal unsaturations per molecule.     

Clinicopathological features in HLA-DR-negative acute myeloid leukemia

From a series of 176 patients with acute myeloid leukemia (AML), we have identified 11 patients with HLA-DR-negative AML excluding acute promyelocytic leukemia. All patients showed not (15; 17) or consistent chromosomal abnormalities. According to the French-British-American criteria, seven, three, and one patients were classified into M1, M2, and M4, respectively. Blasts from these patients were CD33+, HLA-DR-, and lymphoid-antigen-. All patients entered complete remission after induction therapy. Of these, blasts from four patients had strikingly invaginated nuclear membrane and finely granular peroxidase activity. The phenotype of the blasts was CD33+, CD34-, CD2-, and HLA-DR-. All four patients showed hyperleukocytosis on initial presentation. One patient received all-trans retinoic acid at relapse, however, the drug did not induce the differentiation of the blasts. These four patients were suspected to have acute myeloid/natural killer (NK) leukemia because of the prominent morphological feature of the blasts and the initial hyperleukocytosis, although NK cell activity of the blasts was not examined. Since HLA-DR-negative AML is heterogeneous, it is necessary for identifying acute myeloid/ NK leukemia within the disorder.     

Streptomyces aminopeptidase P: biochemical characterization and insight into the roles of its N-terminal domain

We purified and characterized the aminopeptidase P from Streptomyces costaricanus TH-4 (thAPP). This enzyme has a tetramer structure, a metal-ion preference toward Zn, broad substrate specificity and a narrow pH dependency for activity. The primary structure of thAPP, respectively, exhibits 91% and 65% identity with those of two other APPs-APP I and APP II-from Streptomyces lividans (slAPP I and slAPP II). We next overexpressed the genes encoding thAPP and slAPP II in Escherichia coli and characterized them. Two differences were apparent in their properties: slAPP II formed a dimer, whereas thAPP formed a tetramer; also, the alkaline side pKa for the catalytic action of slAPP II is higher than that of thAPP. Investigation using chimeras of both enzymes revealed that the N-terminal domain is associated with the determination of pKa values for catalytic action and quaternary structure.     

A TEM study on melt-crystallized poly(butylene terephthalate)

A study was made to investigate an optimum condition for ruthenium tetraoxide staining of poly(butylene terephthalate) (PBT) with glass transition temperature as low as ca. 23 degrees C for TEM observation of melt-grown PBT crystals. The morphological study of ultrathin sections prepared based on optimum staining at 25 degrees C for 8 h revealed formation of fringed-micellar crystal nuclei in the early stage and folded-chain fringed-micellar crystals in the later stage of isothermal crystallization at 40 degrees C from melt. The fraction of chain-folded crystals increased with increasing crystallization temperature from the quantitative analysis of crystal thickness in comparison with the reported morphology using the replica method.