Non-covalent functionalization of multi-walled carbon nanotubes with organic aromatic compounds

Several aromatic compounds derived from benzene by its annelation (naphthalene, anthracene, phenanthrene, pyrene) and exocyclic substitution (e.g., nitrobenzene, dinitrobenzenes, trinitrobenzene, chlorobenzene, N,N-dimethylaniline, and others) and endocyclic substitution (pyridine, quinoline, isoquinoline) efficiently sorbed on multi-walled carbon nanotubes (MWCNTs). Equilibrium constants for the sorption process have been determined. Computations of the energy of formation were performed for surface complexes of those arenes on single-walled carbon nanotubes (SWCNTs). Formation energies of those complexes were correlated against the experimental equilibrium constants. The latter were also correlated against calculated LUMO energy of the arenes. Solely, limited tendencies to the linearity could be observed. The analysis of the results of the correlations indicated that the arenes acting as the charge acceptors formed stronger complexes than arenes with a high electron density in the molecular orbital, for instance, N, N-dimethylaniline. The area of the arene--SWCNT contact was very essential for the complexation. The proximity of the HOMO orbital of SWCNT and LUMO of the arene was another essential factor. Bulky substituents in the arene molecules obscured their efficient contact with SWCNT.     

Mechanical Properties of Electron Beam Cured Monomer and Monomer/Liquid Crystal Films

This article reports on mechanical properties of electron beam cured tripropylene glycol diacrylate (TPGDA) and propoxylated glycerol triacrylate (GPTA) films. This study has been motivated by the need to have direct access to those properties for analyzing the thermo‐mechanical behavior and electro‐optical properties of polymer dispersed liquid crystal systems in general, and systems made either of TPGDA or GPTA and low molecular weight liquid crystals in particular. Representative examples of these systems are considered in this work. The effects of the degree of crosslinking on the mechanical strength of the polymer network are analyzed by considering different doses of the electron beam irradiation. As the radiation dose increases, the mechanical strength of the film is enhanced. Addition of a small amount of liquid crystals leads to remarkable plasticizing effects.

Young modulus and rubbery state modulus as a function of EB dose for cured TPGDA films. The filled symbols represent the Young modulus and the open symbols represent the rubbery state modulus. Circles are for pure TPGDA and squares are for TPGDA/E7 mixture with 15 wt.‐% E7.     

Empathy and Modern Technology: A Neuroergonomics Perspective

The primary purpose of this paper is to discuss the role of empathy in the design of advanced systems in manufacturing and service industries in order to ensure suitable working conditions for employees from the social and technological point of view. The origins and components of empathy are briefly reviewed. The neural underpinnings of three components of empathy, including cognitive, emotional, and behavioral aspects, are considered in the context of human–human and human–machine interactions, as well as design of working environments. Finally, the potential advantages of applying empathy‐related knowledge to the design and development of human‐centered technology are discussed.     

Studies on the synthesis of fiber-forming block copolymers of polyacrylonitrile and poly(ethylene oxide)

Modified PEO (MW 6000) containing xanthate groups was used for the synthesis of block copolymers of PAN and PEO. Principal parameters affecting the synthesis were examined. To confirm the segmental structure of the obtained products, precipitation fractionation, gel permeation chromatography, infrared, and ¹H nuclear magnetic resonance methods were used. The fiber-forming properties were investigated by means of rheological examination of concentrated solutions of PAN–PEO and confirmed by spinning the fibers under laboratory conditions. The physical and mechanical properties of the fibers were also determined.     

Application of monosaccharides derivatives in colloidal processing of aluminum oxide

Obtaining highly loaded, time-stable and relatively low viscosity suspensions approaches colloidal processing to be very convenient and effective route of shaping of nanopowders. In order to obtain well dispersed, homogenous ceramic slurries, certain additives are given. Saccharides, particularly monosaccharides, as well as their derivatives, were found to be a group of effectively working processing agents in case of alumina, which has been used as a solid phase of highly loaded nanosuspensions. This class of chemical compounds can be described by a series of advantages – they are non-toxic, water-soluble, inexpensive, etc. In this paper suspensions of nano- and submicro-alumina powders with addition of d-fructose, 1-O-methyl-d-fructose, d-glucose and 3-O-acrylic-d-glucose have been studied in terms of their rheological properties, moreover the properties of as-received green bodies have been presented.     

High-pressure catalytic and thermal cracking of polyethylene

The thermal cracking and catalytic cracking processes of low-density polyethylene were studied in a closed autoclave. The compositions of gaseous and liquid products were analysed by means of GC/FID and GS/MS chromatographic methods. The fractional composition of liquid products was found by distillation. Increased temperature of PE depolymerisation process increases the production of gaseous products and low-boiling liquid compounds; more aromatic hydrocarbons are formed instead of alkenes. When a lower temperature and longer time are adopted for the process to reach the assumed conversion, more straight chained hydrocarbons are produced. The acidic aluminosilicate catalyst yields more low-boiling liquid fractions, more isoalkanes and more aromatics. The neutral alumina is favourable for the production of alkenes and vacuum gas oil fraction in comparison to a non-catalytic process. The Ni–Mo/Al₂O₃ catalyst is efficient in hydrogenation of depolymerisation products. The reaction products contain only saturated compounds then and no aromatics are formed.     

Cyclic chronopotentiometry as a detection tool for flowing solution systems

Cyclic chronopotentiometry provides a very simple detection method, which may be particularly useful in capillary electrophoresis (CE) and microseparation systems. It has been shown that for disk microelectrodes it is possible to define safe reduction and oxidation currents that would never lead to the formation of H2 or O2 gas bubbles, even if they are applied for an indefinitely long time period. During end-column CE detection, currents passing through the working microelectrode can be completely controlled by the external electronic circuit and they are not affected by the separation current. Consequently, problems created by the offset potential in CE can be completely eliminated. The detection can be accomplished through a variety of different mechanisms; however, generation of the electrode response as a result of analyte adsorption seems to be most common. The method is applicable to many analytes, which do not have to be electroactive. The analytical signal is obtained by monitoring the change in the average electrode potential (calculated for either a cathodic or an anodic half-cycle) caused by an analyte interacting with the electrode. The analytical signal is proportional to the analyte concentration, within a concentration range extending over approximately 2 orders of magnitude.     

Two-period vs. multi-period model for supply chain disruption management

A novel two-period modelling approach is developed for supply chain disruption mitigation and recovery and compared with a multi-period approach. For the two-period model, planning horizon is divided into two aggregate periods: before disruption and after disruption. The corresponding mitigation and recovery decisions are: (1) primary supply and demand portfolios and production before a disruption, and (2) recovery supply, transshipment and demand portfolios and production after the disruption. In the multi-period model, a multi-period planning horizon is applied to account for a detailed timing of supplies and production. The primary and recovery portfolios are determined simultaneously and for both approaches the integrated decision-making, stochastic mixed integer programming models are developed. While the simplified two-period setting may overestimate (for best-case capacity constraints) or underestimate (for worst-case capacity constraints) the available production capacity, it can be easily applied in practice for a fast, rough-cut evaluation of disruption mitigation and recovery policy. The findings indicate that for both two- and multi-period setting, the developed multi-portfolio approach leads to computationally efficient mixed integer programming models with an embedded network flow structure resulting in a very strong linear programming relaxation.     

Balancing and scheduling of surface mount technology lines

A mixed-integer programming approach to simultaneous or sequential balancing and scheduling of surface mount technology (SMT) lines for printed wiring board (PWB) assembly is presented. The SMT line consists of several processing stages in series separated by finite intermediate buffers, where each stage has one or more identical parallel machines. In the line, different types of PWBs are assembled using various types of electronic components. The components are assigned to feeder slots of a feeder carrier at each placement station. Different types of components occupy a different number of feeder slots. The total number of slots available at each station was limited. The problem objective was to determine an assignment of components to feeder slots at each placement station and to determine an assembly schedule for a mix of board types to complete the boards in minimum time. Numerical examples and some computational results are presented to illustrate applications of the proposed approach.