Thermal and mechanical properties of the polymers synthesized by the sequential polymerization of propylene and 1‐hexadecene

The block copolymer of poly(1‐hexadecene) (PHD) and polypropylene (PP) was effectively synthesized by the sequential polymerization of propylene and 1‐hexadecene by using highly isospecific TiCl₃/Cp₂Ti(CH₃)₂ (Cp = cyclopentadienyl). The block copolymers had two separate melting temperatures of constituent blocks. The modulus of PHD–PP block copolymer was enhanced as the content of sequentially polymerized PP block was increased. The elongation at break showed positive deviation at the intermediate compositions from the simple additive values of constituent homopolymers. Shape memory effect which utilizes the crystalline PHD block as a reversible phase and the crystalline PP block as a fixed structure was examined. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1709–1715, 2002; DOI 10.1002/app.10551     

Relationship between dietary supply of long-chain fatty acids and membrane composition of long- and very long chain essential fatty acids in developing rat photoreceptors

The present study was designed to determine if dietary supply of long-chain fatty acid (LCFA, C20∶4n-6, and/or C22∶6n-3), reflecting levels that might be incorporated into infant formulas, influences the fatty acid composition of the visual cell membrane. The rod outer segment (ROS) of the retina was analyzed from rats fed diets varying in the ratio of 18∶2n-6 to 18∶3n-3 with or without 20∶4n-6 [arachidonic acid (AA)] and 22∶6n-3 (docosahexaenoic acid) from birth to six weeks of age. The level of very long chain fatty acids (VLCFA, C₂₄−C₃₆) was identified using gas chromatography and gas chromatography-mass spectrometry. In the ROS, the highest relative percent of AA was attained in phosphatidylcholine (PC) and phosphatidylethanolamine (PE) of animals fed 1% AA diet, whereas feeding 0.7% docosahexaenoic acid (DHA) diet significantly increased the DHA level in PC, phosphatidylserine, and phosphatidylinositol compared to feeding diets containing AA. VLCFA of n-6 and n-3 up to C₃₆ were found in PC, with the most abundant fatty acids being C₃₂ and C₃₄. In PC, phosphatidylserine and PE, the n-6 tetraenoic VLCFA level was highly increased in animals fed 1% AA compared to other dietary groups. This study suggests that dietary fat containing small amounts of AA or DHA is an important factor influencing membrane fatty acid composition of the visual cell during development. Based on a presentation at the AOCS Annual Meeting & Expo in San Antonio, Texas, May 7–11, 1995.     

Morphology-rheology relationship in hyaluronate/poly(vinyl alcohol)/borax polymer blends

In this work, we have prepared bioartificial polymer blends using hyaluronate (HA) as a biological component and poly(vinyl alcohol)-borax association (PVAs) as a synthetic component, and investigated the rheological properties as well as morphology of the blends. When plotted against the blend composition, the rheological properties showed both positive and negative deviation from the linear additive mixing rule depending on thermal history. The blend showed enhanced viscosity at the composition of 20 wt% of HA and 80 wt% of PVAs, when PVA was dissolved at high temperature. The viscosity enhancement was caused by the network formation of HA aggregates in the micrometer scale. In addition, the network structure of HA aggregates was found to be fractal with the fractal dimension of 1.7. As PVA system also forms a network structure in the nanometer scale between hydroxyl groups of PVA and borate anions, the blend system is unique in that it has network structures in both micrometer and nanometer scales in one material. On the contrary, HA formed aggregates but not any network structure in the blend of the same composition but of the negative deviation. In conclusion, we showed that HA/PVAs blend system may have diverse morphology as well as very broad spectrum of rheological properties, and could suggest that the rheology and morphology of HA/PVAs blends can be designed not only by controlling composition but also by controlling thermal and deformation history of the components.     

Preparation and morphology of electrically conductive and transparent poly(vinylchloride)-polypyrrole composite films

Summary The chemical process of preparing poly(vinylchloride)-polypyrrole composite films with high electrical conductivity and transparency has been studied. Pyrrole has been diffused into the poly(vinylchloride) matrix in the swelling medium of n-hexane and acetone mixture. The oxidative polymerization of the diffused pyrrole in the binary solvent system of acetonitrile and methanol gives high conductivity of the polypyrrole as well as the good penetration of the oxidant into the PVC polymer matrix. The analytical testing of the composite film shows the formation of homogeneous mixture of polypyrrole and poly(vinylchloride) conductive layer within the 1.0m of thickness on the film surface. The transparency of the composite film showed about 50–60% at 500 nm. The electrical conductivity of the composite was about 20 s/cm.     

Effect of calcination temperature on the characteristics of SO<Emphasis Type="Italic">sk</Emphasis>4/2-/TiO<Subscript>2</Subscript> catalysts for the reduction of NO by NH<Subscript>3</Subscript>

The catalytic activity of sulfated titania (ST) calcined at a variety of temperatures has been investigated for selective catalytic reduction (SCR) of NO by NH₃. The NO removal activity of ST catalyst mainly depends on its sulfur content, indicating critical role of sulfur species on the surface of TiO₂. The role of sulfur is mainly the formation of acid sites on the catalyst surface. The presence of both BrØnsted and Lewis acid sites on the surface of sulfated titania has been identified by IR study with the adsorption of NH₃ and pyridine on ST. The reduction of the intensity of IR bands representing BrØsted acid sites is more pronounced than that revealing Lewis acid sites as the calcination temperature increases. It has been further clarified by IR study of ST500 catalyst evacuated at a variety of temperatures. The NO removal activity also decreases with the increase of the catalyst calcination temperature. It simply reveals that BrØnsted acid sites induced by sulfate on the catalyst surface are primarily responsible for the enhancement of catalytic activity of ST catalyst containing sulfur for NO reduction by NH₃.     

Rheology-processing-property relationships in tubular blown film extrusion. I. High-pressure low-density polyethylene

Three different grades of high-pressure low-density polyethylene resin were used to establish relationships between tubular film blowability and the molecular parameters, namely, the molecular weight distribution (MWD) and the degree of long-chain branching (LCB), and also between the processing conditions and the mechanical properties of the tubular blown films produced. For the study, both the shearing and elongational flow properties of the resins were determined. During the tubular film blowing experiment we measured the freeze-line position, the tubular bubble diameter, the takeup speed, the axial tension, the pressure inside the tubular bubble, and the mass flow rate of the resin. The thickness of the tubular blown films was measured from the samples collected. In order to determine the tubular film blowability, we measured the maximum takeup speed at which the tubular blown bubble broke, for various blowup ratios. The measurements described above permitted us to calculate the tensile stresses at the freeze line, in both the machine and transverse directions, and they were found to be correlatable to the processing conditions employed. It has been found that the tubular film blowability is increased as the resin's MWD becomes narrower and the degree of LCB is less. It has been found further that a resin having lower elongational viscosity tends to give a greater draw-down ratio, indicating a better tubular film blowability. Finally, the tensile properties of the tubular blown films were found correlatable to the processing variables, namely, blowup and takeup ratios.     

Continuous ethanol production from wood hydrolysate by chemostat and total cell retention culture

Chemostat and total cell retention cultures with internal filter system ofSaecharomyc.es cerevisiae H1-7 were carried out to produce ethanol from wood hydrolysate. Maximum ethanol productivity obtained in a chemostat with the aeration rate of 1 vvm was 3.79 g/(L·h). This was 20% higher than that in a chemostat without aeration. However, the substrate was not completely consumed at the dilution rate with the maximum productivity. The realistic productivity, which has higher than 99% conversion rate of substrate, was. 2.95 g/(L·h). The maximum productivity in the total cell retention culture was 6.65 g/(L·h) at the dilution rate of 0.19 h¹ and the residual glucose concentration was negligible.     

The nucleation of microcellular thermoplastic foam with additives: Part II: Experimental results and discussion

Experiments were performed to validate the model for the nucleation of microcellular foams in amorphous thermoplastic polymers. The polystyrene-zinc stearate system was chosen as the model system. Other additives such as stearic acid and carbon black were also investigated. Molecular weight and orientation effects were studied. Nitrogen and carbon dioxide were used to produce the microcellular bubbles. Results show that amounts of soluble additives at levels just below their solubility limit and high gas saturation pressures yield the most acceptable foams—ones with a large number of uniform small bubbles. In this region, the bubble number is sensitive to both the gas saturation pressure and the concentration of solutes. Increasing the concentration of soluble additives above the solubility limit has little effect on bubble number and almost eliminates the dependence on saturation pressure. Molecular weight and orientation had no effect on the number of bubbles produced. Similarly, carbon black, which is insoluble in and which bonds well to polystyrene, produced no effect on bubble numbers. The agreement between theoretical predictions and experimental results is reasonably good.     

Interfacial adhesion reaction of polyethylene and starch blends using maleated polyethylene reactive compatibilizer

The interfacial reaction of the polyethylene (PE)/starch blend system containing the reactive compatibilizer maleated polyethylene (m‐PE) was directly characterized by Fourier transform infrared (FTIR) spectroscopy. A significant amount of anhydride groups on m‐PE existed as hydrolyzed forms, resulting in a large amount of carboxyl groups. Using a vacuum‐heating‐cell designed in the laboratory, the carboxyl groups were successfully transformed into the dehydrolyzed state (i.e., anhydride group). This result enabled the direct spectroscopic observation of chemical reaction occurring at the interface. For the PE/starch blend system containing m‐PE, the chemical reaction at the interface was verified by the evolution of ester and carboxyl groups in the FTIR spectra. The effect of the reactive compatibilizer on the interfacial morphology was also examined by scanning electron micrography (SEM). Enhanced interfacial adhesion was clearly observed for the blend system containing reactive compatibilizer. Tensile strengths of blend systems containing m‐PE also increased noticeably compared with the corresponding system without compatibilizer. A similar observation was made for the breaking elongation data. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 767–776, 2002     

Determining node duty cycle using Q-learning and linear regression for WSN

Wireless sensor network(WSN)is effective for monitoring the target environment,which consists of a large number of sensor nodes of limited energy.An efficient medium access control(MAC)protocol is thus imperative to maximize the energy efficiency and performance of WSN.The most existing MAC protocols are based on the scheduling of sleep and active period of the nodes,and do not consider the relationship between the load condition and performance.In this paper a novel scheme is proposed to properly determine the duty cycle of the WSN nodes according to the load,which employs the Q-leaming technique and function approximation with linear regression.This allows low-latency energy-efficient scheduling for a wide range of traffic conditions,and effectively overcomes the limitation of Q-learning with the problem of continuous state-action space.NS3 simulation reveals that the proposed scheme significantly improves the throughput,latency,and energy efficiency compared to the existing fully active scheme and S-MAC.