Control of molecular weight distribution in propylene polymerization with Ziegler–Natta/metallocene catalyst mixtures

Propylene polymerization was investigated with a sequential addition of Ziegler–Natta and metallocene catalysts. From the fact that the molecular weights of polypropylene (PP) produced with Ziegler–Natta and with metallocene catalysts differ, it was possible to control the molecular weight distribution (MWD) of PP with a sequential addition of methylaluminoxane and rac-ethylenebis(indenyl)zirconium dichloride followed by triethylaluminum and magnesium dichloride-supported titanium tetrachloride catalyst. The obtained PP exhibited a wide MWD curve with shoulder peak. The position and height of each peak was controlled with the variation of polymerization time for each catalyst as well as the amount of each catalyst. The MWD of PP prepared with sequential addition of catalysts was much wider than that of PP obtained from each catalyst. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 67:2213–2222, 1998     

Preparation of toughened PMMA through PEG-modified urethane acrylate/PMMA core–shell composite particles

Poly(urethane acrylate) (PUA)/poly(methylmethacrylate) (PMMA) core–shell composite particles were prepared by two-stage emulsion polymerization. The sizes of composite particles could be varied from 25 to 210 nm by introducing polyoxyethylene (POE) groups to the urethane acrylate molecular backbone. Core–shell morphology was identified by investigating the polarity of the surface of the core and shell polymer particles and by measuring the contact angle of the composite particles. A composite particle prepared with relatively small particles (about 20 nm) did not show the core/shell morphology, because the high polar surface of the core polymer particle and the low-stage ratio of the core to the shell cause the formation of a core/shell two-stage latex to be more thermodynamically unstable. The fracture toughness of rubber-toughened PMMA containing PUA/PMMA composite particles increased as the particle sizes decreased and the shell thickness of the composite particles increased. In particular, when the average size of the composite particle was about 43 nm and the stage ratio was 50/50, the fracture toughness of the rubber-toughened PMMA increased more than three times compared with that of pure PMMA. Furthermore, the transparency of toughened PMMA could be maintained up to 91% in the visible spectra range. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 2291–2302, 1998     

Synthesis of a novel poly(aryl ether) with pendent N-phenylimide groups

A novel monomer with two N-phenylimide activating groups for the preparation of poly(aryl ether)s was investigated. A poly(aryl ether) was prepared by nucleophilic halide displacement from an aromatic dihalide monomer containing two N-phenylimide groups by sodium salts of bisphenol A. The monomers and the resulting polymer were characterized by FT-IR and ¹H NMR spectroscopy, elemental analysis and differential scanning calorimetry (DSC). The prepared polymer with a molecular weight of 6 300 and a polydispersity of 1.37 determined by GPC is readily soluble in polar aprotic solvents, e. g. dimethylformamide (DMF), dimethylacetamide (DMAc), dimethylsulfoxide (DMSO), and N-methyl-2-pyrrolidone (NMP). Despite the low molecular weight the polymer is thermally stable up to 390°C and has a glass transition temperature of 218°C which is identical to that of ULTEM® poly(ether imide).     

Apigenin Induces Autophagy and Cell Death by Targeting EZH2 under Hypoxia Conditions in Gastric Cancer Cells

Hypoxia is a major obstacle to gastric cancer (GC) therapy and leads to chemoresistance as GC cells are frequently exposed to the hypoxia environment. Apigenin, a flavonoid found in traditional medicine, fruits, and vegetables and an HDAC inhibitor, is a powerful anti-cancer agent against various cancer cell lines. However, detailed mechanisms involved in the treatment of GC using APG are not fully understood. In this study, we investigated the biological activity of and molecular mechanisms involved in APG-mediated treatment of GC under hypoxia. APG promoted autophagic cell death by increasing ATG5, LC3-II, and phosphorylation of AMPK and ULK1 and down-regulating p-mTOR and p62 in GC. Furthermore, our results show that APG induces autophagic cell death via the activation of the PERK signaling, indicating an endoplasmic reticulum (ER) stress response. The inhibition of ER stress suppressed APG-induced autophagy and conferred prolonged cell survival, indicating autophagic cell death. We further show that APG induces ER stress- and autophagy-related cell death through the inhibition of HIF-1α and Ezh2 under normoxia and hypoxia. Taken together, our findings indicate that APG activates autophagic cell death by inhibiting HIF-1α and Ezh2 under hypoxia conditions in GC cells.     

Correlation between Oxidative Stress and Transforming Growth Factor-Beta in Cancers

The downregulation of reactive oxygen species (ROS) facilitates precancerous tumor development, even though increasing the level of ROS can promote metastasis. The transforming growth factor-beta (TGF-β) signaling pathway plays an anti-tumorigenic role in the initial stages of cancer development but a pro-tumorigenic role in later stages that fosters cancer metastasis. TGF-β can regulate the production of ROS unambiguously or downregulate antioxidant systems. ROS can influence TGF-β signaling by enhancing its expression and activation. Thus, TGF-β signaling and ROS might significantly coordinate cellular processes that cancer cells employ to expedite their malignancy. In cancer cells, interplay between oxidative stress and TGF-β is critical for tumorigenesis and cancer progression. Thus, both TGF-β and ROS can develop a robust relationship in cancer cells to augment their malignancy. This review focuses on the appropriate interpretation of this crosstalk between TGF-β and oxidative stress in cancer, exposing new potential approaches in cancer biology.     

Direct polymer reaction of poly(styrene‐co‐maleic anhydride): Polymeric imidization

Using direct polymer reaction of poly(styrene‐co‐maleic anhydride) (SMA), a synthesis of copolymer of styrene and N‐aryl succinimide (SMI) has been investigated. SMI copolymers were synthesized from SMA copolymers by a concerted two‐step reaction, which consisted of the condensation reaction (step 1) of SMA with aromatic amine to prepare a precursor, succinamic acid, for imide formation and the cyclodehydration reaction (step 2) of succinamic acid. In this article, the application of Searle's preparation method of N‐aryl or N‐alkyl maleimide to the direct polymer reaction for SMI was attempted. Compared with synthesis of monomeric imides, the imide formation in polymeric condition appeared to be a little more sensitive to the reaction condition. The optimum condition for maximum conversion was examined in terms of time, temperature, and the amount of reactants. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1187–1196, 1999     

Graft copolymerization of mixtures of acrylic acid and acrylamide onto polypropylene film

Liquid phase ultraviolet irradiation in the presence of benzophenone as a photosensitizer and barium hydroxide as a pH controller were used to graft the mixtures of acrylic acid and acrylamide to a polypropylene surface. The surface of the grafted polypropylene samples were characterized by Fourier transform infrared spectroscopy‐attenuated total reflectance, electron spectroscopy for chemical analysis, scanning electron microscopy, and a contact angle meter. The pH value of the reaction medium that produced the graft with equal molar ratio was found to be ∼ 3.77. The optimal reaction condition was found at a monomer feed of 25%, a reaction time of 30 min, and a benzophenone concentration of 1%. Surface tension of the samples increased to a value of 40 dyn cm⁻¹ due to the graft of the hydrophilic monomers. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 251–256, 1999     

Poly(methyl methacrylate) toughening with refractive index‐controlled core–shell composite particles

Poly(butylacrylate‐co‐styrene)/poly(methyl methacrylate) (PMMA) core–shell composite particles having different refractive indexes were prepared by a two‐stage consecutive emulsion polymerization. The refractive index of the core phase was controlled by varying the incorporated amount of divinylbenzene (DVB) which acted as a crosslinking agent as well as a refractive index enhancer. The blends of these core–shell composite particles with PMMA showed an impact strength increment of about three times compared with that of the pure PMMA. However, as the amount DVB increased, the impact strength showed a tendency toward decreasing. This was caused by the loss of the elastic property of the core phase. The toughened PMMA blended with core–shell composite particles having the core crosslinked with 1 wt % DVB showed the best transparency. However, the transparency was rather decreased, as the difference of the refractive index between the core phase and the pure PMMA increased. This suggested that in the case of using the core–shell composite particles as a toughening agent for PMMA the matching of the refractive index of the core phase with that of the pure PMMA was one of key factors in maintaining the transparency of the toughened PMMA. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1607–1614, 1999     

Synthesis and characterization of novel aromatic-aliphatic poly(amide-imide-imide)s (PAII)

Novel poly(amide-imide-imide)s (PAII) were prepared by polycondensation of a new monomer synthesized from trimellitic anhydride and glutamic acid, followed by reflux condensing with thionyl chloride and several diamines. Polymers and monomers were characterized by ¹H NMR and FT-IR spectroscopy, elemental analysis and mass spectrometry. Inherent viscosities of the resulting polymers were in the range of 17–26 mL g^–1 (M_w 13 400–29 160, polydispersity (M_w/M_n) ca. 1.3–1.7), representing rather low molecular weights. The glass transition temperatures of the polymers were in the range of 210–285°C depending on the structure of diamines, and the thermal stability of the polymers was up to 400°C, comparable with that of polyimides and poly(amide imide)s. All the polymers synthesized are well soluble in aprotic polar solvents such as dimethylformamide, dimethyl sulfoxide, N-methyl-2-pyrrolidone and dimethylacetamide. Particularly, polymers containing oxydianiline and 4,4′-diaminodiphenyl sulfone were quite soluble in m-cresol, pyridine, nitrobenzene and tetrahydrofuran.     

Korean Red Ginseng Improves Astrocytic Mitochondrial Function by Upregulating HO-1-Mediated AMPKα–PGC-1α–ERRα Circuit after Traumatic Brain Injury

Heme oxygenase-1 (HO-1) exerts beneficial effects, including angiogenesis and energy metabolism via the peroxisome proliferator-activating receptor-γ coactivator-1α (PGC-1α)–estrogen-related receptor α (ERRα) pathway in astrocytes. However, the role of Korean red ginseng extract (KRGE) in HO-1-mediated mitochondrial function in traumatic brain injury (TBI) is not well-elucidated. We found that HO-1 was upregulated in astrocytes located in peri-injured brain regions after a TBI, following exposure to KRGE. Experiments with pharmacological inhibitors and target-specific siRNAs revealed that HO-1 levels highly correlated with increased AMP-activated protein kinase α (AMPKα) activation, which led to the PGC-1α-ERRα axis-induced increases in mitochondrial functions (detected based on expression of cytochrome c oxidase subunit 2 (MTCO2) and cytochrome c as well as O₂ consumption and ATP production). Knockdown of ERRα significantly reduced the p-AMPKα/AMPKα ratio and PGC-1α expression, leading to AMPKα–PGC-1α–ERRα circuit formation. Inactivation of HO by injecting the HO inhibitor Sn(IV) protoporphyrin IX dichloride diminished the expression of p-AMPKα, PGC-1α, ERRα, MTCO2, and cytochrome c in the KRGE-administered peri-injured region of a brain subjected to TBI. These data suggest that KRGE enhanced astrocytic mitochondrial function via a HO-1-mediated AMPKα–PGC-1α–ERRα circuit and consequent oxidative phosphorylation, O₂ consumption, and ATP production. This circuit may play an important role in repairing neurovascular function after TBI in the peri-injured region by stimulating astrocytic mitochondrial biogenesis.