Design of cascaded volume holographic gratings to increase the number of channels for an optical demultiplexer

The design and demonstration of a holographic optical demultiplexer based on cascaded volume holographic gratings are presented. By serially adding a second holographic grating, which has a different grating period, slant angle, and center wavelength compared with those of the first grating, the operating wavelength range of the optical demultiplexer could be expanded, and, therefore, the number of channels of the holographic demultiplexer is doubled. As a result of the experiment, a 0.4 nm spaced 130- channel demultiplexer with a channel uniformity of 3.5 dB, a 3 dB bandwidth of 0.12 nm, and channel cross talk of -20 dB is experimentally achieved.     

The effect of chemical surfactants on the absorption performance during NH3/H2O bubble absorption process

The objectives of this paper are to visualize the bubble behavior by shadow graphic method, to examine the effect of surfactants on the bubble type absorption, and to find the optimal conditions to design highly effective compact absorber for NH₃/H₂O absorption system. The initial concentrations of NH₃/H₂O solution and the kinds and the concentrations of surfactants are considered as key parameters. By measuring the absorption rate for each condition, two effects of the addition of surfactants, the Marangoni and the barrier effect, are compared with each other. The results show that the addition of surfactant enhances the absorption performance up to 4.81 times. The experimental correlations of the effective absorption ratio for each surfactant, 2-ethyl-1-hexanol, n-octanol, and 2-octanol, are suggested within ±15, ±10, and ±10%, respectively.     

ECG measurement on a chair without conductive contact

For the purpose of long-term, everyday electrocardiogram (ECG) monitoring, we present a convenient method of ECG measurement without direct conductive contact with the skin while subjects sat on a chair wearing normal clothes. Measurements were made using electrodes attached to the back of a chair, high-input-impedance amplifiers mounted on the electrodes, and a large ground-plane placed on the chair seat. ECGs were obtained by the presented method for several types of clothing and compared to ECGs obtained from conventional measurement using Ag-AgCl electrodes. Motion artifacts caused by usual desk works were investigated. This study shows the feasibility of the method for long-term, convenient, everyday use.     

Clean carbon nanotube field emitters aligned horizontally

Horizontally aligned carbon nanotube (CNT) field emitters, which strongly adhere to the substrate and show good field emission properties, were fabricated by electrophoresis deposition and fissure formation techniques. A thin film of CNTs was deposited on a substrate, by electrophoresis, from an aqueous mixture of CNT and detergent, and then the detergent was deposited also by electropholysis. CNTs with a clean surface were exposed in the fissures produced by firing. The field emission was increased significantly due to the additional deposition of the detergent. When the CNTs were cut by increasing the firing time, the field emission increased significantly, while their stability decreased considerably. Our method does not require any further treatment for field emission.     

A composite photocatalyst of cdS nanoparticles deposited on TiO2 nanosheets

A nanocomposite photocatalyst consisting of deposited CdS nanoparticles on TiO2 nanosheets was fabricated by a simple one-pot method. The contact between two phases was maximized by making a composite structure of TiO2 nanosheet decorated with CdS nanoparticles. The composite photocatalyst showed higher photoactivity for hydrogen production from aqueous Na2S/Na2SO3 solution and decomposition of methylene blue under visible light irradiation (lamda > or =420 nm) compared with single component CdS nanoparticles or a physical mixture of CdS nanoparticles and TiO2 nanorods. The intentional formation of nanoscale heterojunctions between two phases appears beneficial for inducing an efficient electron-hole separation.     

Nanometer-scale chemical heterogeneities of black carbon materials and their impacts on PCB sorption properties: soft X-ray spectromicroscopy study

Synchrotron-based soft X-ray spectromicroscopy was used to probe nanometer-scale chemical heterogeneities of black carbon (BC) materials, including anthracite coal, coke, and activated carbon (AC), and to study their impact on the partitioning of one type of polychlorinated biphenyls (PCB-166: 2,3,4,4',5,6 hexachloro biphenyl) onto AC particles. Various carbon species (e.g., aromatic, ketonic/ phenolic, and carboxylic functional groups) were found in all of the BC materials examined, and impurities (e.g., carbonate and potassium ions in anthracite coal) were identified in nanometer-scale regions of these samples. We show that these chemical heterogeneities in AC particles influence their sorption of hydrophobic organic compounds (HOCs). PCB-166 was found to accumulate preferentially on AC particles with the highest content of aromatic functionalities. These new findings from X-ray spectromicroscopy have the following implications for the role of BC materials in the environment: (1) the functional groups of BC materials vary on a 25-nanometer scale, and so does the abundance of the HOCs; (2) molecular-level characterization of HOC sorption preferences on AC will lead to an improved understanding of AC sorption properties for the remediation of HOCs in soils and sediments.     

A study on effective use of heat transfer additives in the process of steam condensation

It is well known that the additives in absorption chillers play a significant role in increasing absorber performance. Realizing that the additives in absorption chillers circulate throughout the system including the condensers, we investigated the effect of additives in the condenser. Reported herein are the results of the experimental and theoretical investigations done by using effective heat transfer additives for enhancing heat transfer coefficient in condensation of steam over a horizontal copper (99.9% Cu, 0.1% P) tube surface. By using effective additives, the condensation heat transfer coefficient can be enhanced as much as 1.47 times when compared to filmwise condensation. The steam condensation, which occurred in our experiments while using effective additives, was mostly pseudo-dropwise like. In our experiments, we noted that the use of heat transfer additive such as 2-ethoxyethanol for steam condensation was highly effective. This increase in heat transfer coefficient can be attributed to concept of Marangoni effect. It is understood that this surface convection is caused by local variations in the interfacial tension. So far there has been very little noted literature available on the theoretical aspect of surface tension effect on enhancing heat transfer rate in steam condensation. In the current research we try to explain the surface tension effect for enhancing heat transfer rate in steam condensation using effective heat transfer additives.     

Simulation of Ca2+-activated Cl- current of cardiomyocytes in rabbit pulmonary vein: implications of subsarcolemmal Ca2+ dynamics

In recent studies, we recorded transiently activated outward currents by the application of three-step voltage pulses to induce a reverse mode of Na+-Ca2+ exchange (NCX). We found that these currents were mediated by a Ca2+-activated Cl- current. Based on the recent reports describing the atrial Ca2+ transients, the Ca2+ transient at the subsarcolemmal space was initiated and then diffused into the cytosolic space. Because the myocardium in the pulmonary vein is an extension of the atrium, the Ca2+-activated Cl- current may reflect the subsarcolemmal Ca2+ dynamics. We tried to predict the subsarcolemmal Ca2+ dynamics by simulating these current traces. According to recent reports on the geometry of atrial myocytes, we assumed that there were three compartments of sarcoplasmic reticulum (SR): a network SR, a junctional SR and a central SR. Based on these structures, we also divided the cytosolic space into three compartments: the junctional, subsarcolemmal and cytosolic spaces. Geometry information and cellular capacitance suggested that there were essentially no T-tubules in these cells. The basic physical data, such as the compartmental volumes, the diffusion coefficients and the stability coefficients of the Ca2+ buffers, were obtained from the literature. In the simulation, we incorporated the NCX, the L-type Ca2+ channel, the rapid activating outward rectifier K+ channel, the Na+-K+ pump, the SR Ca2+-pump, the ryanodine receptor, the Ca2+-activated Cl- channel and the dynamics of Na+, K+, Ca2+ and Cl-. In these conditions, we could successfully reconstruct the Ca2+-activated Cl- currents. The simulation allowed estimation of the Ca2+ dynamics of each compartment and the distribution of the Ca2+-activated Cl- channel and the NCX in the sarcolemma on the junctional or subsarcolemmal space.