Simultaneous enhanced photon capture and carrier generation in Si solar cells using Ge quantum dot photonic nanocrystals

We propose a novel solar cell structure with photonic nanocrystals coupled to quantum dots (QDs) for advanced management of photons and carriers. The photonic nanocrystals at the surface create an extra interaction between the photons and the QDs, which promotes light trapping. Photo-generated carriers can be efficiently transported by preparing vertically aligned QDs with electronic coupling. Implementation of the proposed structure was realized in crystalline Si solar cells with Ge QDs by development of a simple and practical formation method based on a wet chemical process without any lithography techniques. The wet process utilizes a periodically modulated etching rate induced by self-organized Ge QDs. The effectiveness of the proposed solar cell was demonstrated by the marked increase of the absolute conversion efficiency when compared with the control crystalline Si solar cells. It is found that light trapping by the photonic nanocrystals has a larger contribution to the efficiency improvement than the contributions from the carrier transport of the vertically aligned QDs.     

Binary image encryption based on interference of two phase-only masks

Optical image encryption based on interference has attracted a lot of attention recently. The technique employs two pure phase masks derived from the complex field of the image in the Fresnel diffraction domain. The image decryption procedure can be carried out by inverse Fresnel transformation of the summation of two pure phase masks. However, the silhouette of the original image, which is recovered by either of the two phase-only masks, impedes the application of this technique. In this paper, a very simple method for binary image encryption based on interference of two phase-only masks is proposed without any silhouette problem. The binary image in combination with a random phase mask is separated into two phase-only masks directly, and the decryption by summation of the two masks can be performed digitally or optically. In this paper, the encryption and decryption processes are analyzed, after which both the optical simulation and the experimental results based on single-beam holography are given to demonstrate the feasibility of the encryption method. As information nowadays is mainly digitized into binary codes, the proposed encryption method may find applications in the information processing field.     

Coupling-loss reduction of a vertically coupled microring resonator filter by spot-size-matched busline waveguides

To improve the input-output coupling loss of a vertically coupled microring resonator filter, we fabricated microring resonators on an antiresonant reflecting optical waveguide (ARROW) with a large spot size and on the rectangular busline waveguide with a spot-size transformer. The spot size and the tapered structure were optimally designed from the viewpoint of spot-size matching to single-mode fibers and the reduction of radiation loss. Clear dropping responses were demonstrated for the ARROW-based microring resonator filters, and the coupling loss was successfully reduced by 22 dB.     

Identifying behaviour patterns of construction safety using system archetypes

Construction safety management involves complex issues (e.g., different trades, multi-organizational project structure, constantly changing work environment, and transient workforce). Systems thinking is widely considered as an effective approach to understanding and managing the complexity. This paper aims to better understand dynamic complexity of construction safety management by exploring archetypes of construction safety. To achieve this, this paper adopted the ground theory method (GTM) and 22 interviews were conducted with participants in various positions (government safety inspector, client, health and safety manager, safety consultant, safety auditor, and safety researcher). Eight archetypes were emerged from the collected data: (1) safety regulations, (2) incentive programs, (3) procurement and safety, (4) safety management in small businesses (5) production and safety, (6) workers’ conflicting goals, (7) blame on workers, and (8) reactive and proactive learning. These archetypes capture the interactions between a wide range of factors within various hierarchical levels and subsystems. As a free-standing tool, they advance the understanding of dynamic complexity of construction safety management and provide systemic insights into dealing with the complexity. They also can facilitate system dynamics modelling of construction safety process.     

Characterization of ceramic plasma-sprayed coatings, and interaction studies between U-Zr fuel and ceramic coated interface at an elevated temperature

Candidate coating materials for re-usable metallic nuclear fuel crucibles, HfN, TiC, ZrC, and Y₂O₃, were plasma-sprayed onto niobium substrates. The coating microstructure and the thermal cycling behavior were characterized, and U-Zr melt interaction studies carried out. The Y₂O₃ coating layer had a uniform thickness and was well consolidated with a few small pores scattered throughout. While the HfN coating was not well consolidated with a considerable amount of porosity, but showed somewhat uniform thickness. Thermal cycling tests on the HfN, TiC, ZrC, and Y₂O₃ coatings showed good cycling characteristics with no interconnected cracks forming even after 20 cycles. Interaction studies done on the coated samples by dipping into a U-20wt.%Zr melt indicated that HfN and Y₂O₃ did not form significant reaction layers between the melt and the coating while the TiC and the ZrC coatings were significantly degraded. Y₂O₃ exhibited the most promising performance among HfN, TiC, ZrC, and Y₂O₃ coatings.     

Effects of applied power on hydrogenated amorphous carbon (a-C:H) film deposition by low frequency (60 Hz) plasma-enhanced chemical vapor deposition (PECVD)

Hydrogenated amorphous carbon (a-C:H) films were deposited onto glass substrates using low frequency (60 Hz) plasma-enhanced chemical vapor deposition and the effects of the applied power on a-C:H films deposition were investigated. During deposition, the electron temperature and the density of CH₄-H₂ plasma were 2.4-3.1 eV and about 10⁸ cm⁻³, respectively. The main optical emission peak of the carbon species observed in the CH₄-H₂ plasma is shown to be excited carbon CH* at 431 nm. The sp³/sp² ratio, band gap, hydrogen content, and refractive index of a-C:H films gradually increased up to a power of 25 W and then saturated at higher power. This tendency is similar to the variation of plasma parameters with varying applied power, thereby indicating that a strong relationship exists between the properties of the films and the plasma discharge.     

Input impedance matching of acoustic transducers operating at off-resonant frequencies

The input impedance matching technique of acoustic transducers at off-resonant frequencies is reported. It uses an inherent impedance property of transducers and thus does not need an external electric matching circuit or extra acoustic matching section. The input electrical equivalent circuit includes a radiation component and a dielectric capacitor. The radiation component consists of a radiation resistance and a radiation reactance. The total reactance is the sum of the radiation reactance and the dielectric capacitive reactance. This reactance becomes zero at two frequencies where the impedance is real. The transducer size can be properly chosen so that the impedance at one of the zero-crossing frequencies is close to 50 Ω, the output impedance of signal generators. At this off-resonant operating frequency, the reflection coefficient of the transducer is minimized without using any matching circuit. Other than the size, the impedance can also be fine tuned by adjusting the thickness of material that bonds the transducer plate to the substrates. The acoustic impedance of the substrate and that of the bonding material can also be used as design elements in the transducer structure to achieve better transducer matching. Lead titanate piezoelectric plates were bonded on Lucite, liquid crystal polymer (LCP), and bismuth (Bi) substrates to produce various transducer structures. Their input impedance was simulated using a transducer model and compared with measured values to illustrate the matching principle.     

Direct growth of core-shell SiC-SiO(2) nanowires and field emission characteristics

A simple, direct synthesis method was used to grow core-shell SiC-SiO(2) nanowires by heating NiO-catalysed silicon substrates. A carbothermal reduction of WO(3) provided a reductive environment and carbon source to synthesize crystalline SiC nanowires covered with SiO(2) sheaths at the growth temperature of 1000-1100?°C. Transmission electron microscopy showed that the SiC core was 15-25?nm in diameter and the SiO(2) shell layer was an average of 20?nm in thickness. The thickness of the SiO(2) shell layer could be controlled using hydrofluoric acid (HF) etching. Field emission results of core-shell SiC-SiO(2) and bare SiC nanowires showed that the SiC nanowires coated with an optimum SiO(2) thickness (10?nm) have a higher field emission current than the bare SiC nanowires.