In situ polyurethane/silica composite formation via a sol‐gel process

Polyurethane acrylate anionomer (PUAA)/silica composite gels were prepared by the sol‐gel reaction of tetraethoxysilane (TEOS) and methacryloxypropyl trimethoxysilane (MPTS) incorporated to PUAA gels by using a swelling method. The formation and structure of composites were confirmed by FTIR, X‐ray diffraction, and SEM. As a result, we found that silica components in composites are located within the ionic domains of their gels and interacted with PUAA via hydrogen bonding. This drastically enhanced the mechanical properties of the composites. Mechanical properties are also improved by MPTS, because MPTS improves the dispersibility and adhesion of silica components in PUAA/silica composite gels. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2327–2334, 2002     

Preparation and characterization of syndiotactic polystyrene/ethylene‐propylene copolymer blends

The reactive compatibilization of syndiotactic polystyrene (sPS)/oxazoline‐styrene copolymer (RPS)/maleic anhydride grafted ethylene‐propylene copolymer (EPR‐MA) blends is investigated in this study. First, the miscibility of sPS/RPS blends is examined by thermal analysis. The cold crystallization peak (T_cc) moved toward higher temperature with increased PRS, and, concerning enthalpy relaxation behaviors, only a single enthalpy relation peak was found in all aged samples. These results indicate that the sPS/RPS blend is miscible along the various compositions and RPS can be used in the reactive compatibilization of sPS/RPS/EPR‐MA blends. The reactive compatibilized sPS/RPS/EPR‐MA blends showed finer morphology than sPS/EPR‐MA physical blends and higher storage modulus (G') and complex viscosity (η*) when RPS contents were increased. Moreover, the impact strength of sPS/RPS/EPR‐MA increased significantly compared to sPS/EPR‐MA blend, and SEM micrographs after impact testing show that the sPS/RPS/EPR‐MA blend has better adhesion between the sPS matrix and the dispersed EPR‐MA phase. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2084–2091, 2002     

Changes in pore properties of phenol formaldehyde-based carbon with carbonization and oxidation conditions

Porous carbon beads were prepared by carbonizing at 700 and 1000 °C under N₂ (NN-series) or CO₂ atmospheres (CO-series) and a subsequent oxidization with boiling nitric acid solution (13%, v/v) for 3 h (ANN- and ACO-series). BET surface area of both CO- and NN-series samples tends to increase with increasing carbonization temperature, but CO-series samples show higher BET surface areas (700 °C: 610 m²/g, 1000 °C: 780 m²/g) compared with those of NN-series samples (700 °C: 380 m²/g, 1000 °C: 580 m²/g). After acid oxidation, BET surface areas of NN-series samples increased from 580 to 650 m²/g, whereas those of CO-series samples decreased from 780 to 600 m²/g. On subsequent acid oxidation, acidic surface functional groups increased in both CO- and NN-series samples, but the CO-series samples tend to have much more acidic surface functional groups. Adsorption of halogenated methanes, such as tetra-, tri- and dichloromethanes, onto the samples of CO-, NN-, ACO- and ANN-series was thought to be driven initially by the basicity, but the acidic functional groups that could attract adsorbates via dipole-dipole interaction might hinder the adsorption of subsequently incoming adsorbates.     

Monomer concentration effect on the phase behavior of poly(propyl acrylate) and poly(propyl methacrylate) with supercritical CO2 and C2H4

Experimental cloud-point data to temperature of 186 °C and pressure of ~2,500 bar are presented for ternary mixtures of poly(propyl acrylate)(PPA)-CO₂-propyl acrylate (PA) PPA-C₂H₄-PA and poly(propyl methacrylate) (PPMA)-CO₂-propyl methacrylate (PMA) systems. Cloud-point pressures of PPA-CO₂-PA system were measured in the temperature range of 32 °C to 175 dgC and to pressures as high as 2,070 bar with PA concentrations of 0.0, 5.0, 11.7 and 30.4 wt%. Adding 34.1 wt% PA to the PPA-CO₂ mixture significantly changes the phase behavior. This system changes the pressure-temperature slope of the phase behavior curves from U-LCST region to LCST region as the PA concentration increases. Cloud-point data to 170 °C and 1,400 bar are presented for PPA-C₂H₄-PA mixtures and with PA concentration of 0.0, 5.7, 15.5 and 22.2 wt%. The cloud-point curve of PPA-C₂H₄ system shows relatively flat at 730 bar for temperatures between 41 and 150 °C. With 15.5 and 22.2 wt% PA the cloud-point curve exhibits a positive slope that extends to 35 °C and ~180 bar. Also, the ternary PPMA-CO2-PMA system was measured below 186 °C and 2,484 bar, and with cosolvent of 5.2-20.1 wt%. PPMA does not dissolve in pure CO₂ to 233 °C and 2,500 bar. Also, when 41.5 wt% PMA is added to the PPMA-CO₂ solution, the cloud-point curve shows the typical appearance of a lower critical solution temperature (LCST) boundary.     

Effect of oxygen flow rate on the structural and electrochemical properties of lithium nickel oxides synthesized by the sol–gel method

The structural and electrochemical properties of LiNiO₂ powders were investigated as a function of the oxygen flow rate employed in the preparation of lithium nickel oxide. It was found that oxygen played an important role in the synthesis of highly crystallized LiNiO₂(R3¯m). In the crystallization process of LiNiO₂, a deficiency of oxygen in the calcination reactor induced the formation of impurities and cubic rock-salt structure (Fm3m) in LiNiO₂ powders. For LiNiO₂ prepared at higher oxygen flow rates, the electrode delivered high discharge capacities with relatively good retention rates. But very low electrode capacity was obtained from LiNiO₂ prepared at lower oxygen flow rates.     

Kinetics of cellobiose decomposition under subcritical and supercritical water in continuous flow system

The effects of reaction temperature, pressure and residence time were investigated with a flow apparatus. Cellobiose decomposition kinetics and products in suband supercritical water were examined at temperatures from 320 to 420 °C at pressures from 25 to 40 MPa, and at residence times within 3 sec. Cellobiose was found to decompose via hydrolysis and pyrolysis. The yield of desired hydrolysis product, glucose, was the maximum value of 36.8% at 320 °C, 35 MPa, but the amount of 5-(hydroxymethyl)furfural (HMF), fermentation inhibitor increased too because residence time increased in the subcritical region owing to decrease of reaction rate. Meanwhile, though the yield of glucose is low in the supercritical region, the yield of HMF decreased compared with the subcritical region; and at the minimum yield of HMF (380 °C, 25 MPa), the yield of glucose was 21.4%. The decomposition of cellobiose followed first-order kinetics and the activation energy for the decomposition of cellobiose was 51.05 kJ/mol at 40MPa.     

Development of refinery scheduling system using mixed integer programming and expert system

This paper presents a hybrid refinery scheduling system combining mathematical programming model and expert system. Mixed-integer linear programming models for crude oil movement between units are merged into the expert system that is for qualitative issues concerning crude vessel unloading operations. The target problem ranging from the crude unloading to the crude charging to distillation towers is decomposed into several module problems for efficiency. Compared with existing scheduling approaches for oil movement, the proposed hybrid refinery scheduling system is very effective in dealing with timing decisions involving vessel unloading operations due to the advantages of an expert system. Since the proposed scheduling system can generate solutions so fast, it is expected to play a key role in the real processes. This paper is dedicated to Professor Wha Young Lee on the occasion of his retirement from Seoul National University.     

Performance evaluation of electrodewatering system for sewage sludges

A laboratory-scale electrodewatering system, incorporating an electric field as an additional driving force to conventional pressure dewatering, has been developed to decrease the water content of sludges generated in wastewater treatment. Consisting of a piston-type filter press, a power supply and a data acquisition system, the electrodewatering system’s performance was evaluated as a function of applied pressure, applied voltage, sludge type and filtration time. Experiments were carried out using sewage sludges with the electric field up to 120 V/cm and pressure ranging from 98.1 to 392.4 kPa. Electrodewatering involving a combination of electric field and pressure enhances both the dewatering rate and final dewatered volume. The final water content of sewage sludges in the electrodewatering system can be reduced to 62 wt%, as compared to 78 wt% achieved with the pressure filtration alone. The electrodewatering system shows the potential to be an effective method for reducing the water content in sludges.     

Characterization of (1'R,4S,4aR,7S,7aR)-dihydronepetalactol as a semiochemical for lacewings,including Chrysopa spp. and Peyerimhoffina gracilis

The enantiomerically pure diastereoisomers (1R,4S,4aR,7S,7aR)- (1) and (1R,4R,4aR,7S,7aR)-dihydronepetalactol (2) were synthesized diastereoselectively from a renewable resource, (4aS,7S,7aR)-nepetalactone (3), isolated as the main constituent of the essential oil of the catmint plant Nepeta cataria. The stereochemistry of the compounds was determined by NMR spectroscopy and X-ray crystallography, and the compounds were identified, respectively, as neomatatabiol and isoneomatatabiol, natural products from Actinidia polygama, for which the lactol stereochemistry was previously incompletely defined. Compound 1 was found to catch significant numbers of three species of lacewing in the field: in Korea, Chrysopa cognata, and in the United Kingdom, Nineta vittata and most notably Peyerimhoffina gracilis. All species caught in significant numbers were found more frequently in traps releasing 1 than 2, while more C. cognata, C. formosa, and C. phyllochroma were found in traps releasing (1R,4aS,7S,7aR)-nepetalactol (4). The catch of P. gracilis with 1 is of particular interest as this lacewing has only recently been recorded in the United Kingdom. Where sexed, the lacewings of all species trapped were found to be male, implying a possible pheromonal role for these or structurally related compounds.     

Particle size effect on the filtration drag of fly ash from a coal power plant

In order to investigate the filtration properties of fly ash from a conventional coal power plant, the filtration drag across the dust cake over an absolute fiberglass filter element was measured. A fluidized bed column was utilized to obtain a well characterized particle stream. The cake resistance coefficient was analyzed by the equation proposed by Endo et al. [1998] in order to observe the effect of particle size and polydispersity. The filtration drag was measured for three kinds of particle stream having the geometric mean particle size of 3.15, 6.07, and 7.83 μm and the geometric standard deviation less than 1.44 in the practical operation conditions for the field applications of face velocity of 0.03–0.06 m/s and area dust load up to 0.2 kg/m². A dust cake of smaller particle size showed larger pressure drop even though the porosity was higher and presented high compressibility according to the face velocity. The particle polydispersity was also a dominant factor affecting the compressibility of the dust cake.