Hybrid layerwise-differential quadrature transient dynamic analysis of functionally graded axisymmetric cylindrical shells subjected to dynamic pressure

In this paper, two computationally efficient and accurate solution methods for transient dynamic analysis of functionally graded (FG) cylindrical shells subjected to internal dynamic pressure are presented. In order to accurately account for the thickness effects, the layerwise theory is employed to approximate the displacement components in the radial direction. In the first solution method, differential quadrature method (DQM) is implemented to discretize the resulting equations in the both spatial and time domains. In the second approach, DQM is applied to discretize equations in the axial direction while Newmark’s time integration scheme is used to solve the problem in the time domain. The fast convergence rate of the methods is demonstrated and their accuracy is verified by comparing the results with those obtained using ANSYS and also with available exact solution of a particular problem. Considerable less computational efforts of the proposed approaches with respect to the finite element method is observed. Furthermore, comparative studies are performed between two approaches in different cases and it is found that the two techniques give very close results. The effects of geometrical parameters and boundary conditions on the transient behavior of shells are also investigated.     

Analysis of gas turbine operating parameters with inlet fogging and wet compression processes

Inlet fogging has been widely noticed in recent years as a method of gas turbine air inlet cooling for increasing the power output in gas turbines and combined cycle power plants. The effects of evaporative cooling on gas turbine performance were studied in this paper. Evaporative cooling process occurs in both compressor inlet duct (inlet fogging) and inside the compressor (wet compression). By predicting the reduction in compressor discharge air temperature, the modeling results were compared with the corresponding results reported in literature and an acceptable difference percent point was found in this comparison. Then, the effects of both evaporative cooling in inlet duct, and wet compression in compressor, on the power output, turbine exhaust temperature, and cycle efficiency of 16 models of gas turbines categorized in four A–D classes of power output, were investigated. The results of this analysis for saturated inlet fogging as well as 1% and 2% overspray are reported and the prediction equations for the amount of actual increased net power output of various gas turbine nominal power output are proposed. Furthermore the change in values of physical parameters and moving the compressor operating point towards the surge line in compressor map was investigated in inlet fogging and wet compression processes.     

Hydrogen evolution assisted electrodeposition of bimetallic 3D nano/micro-porous PtPd films and their electrocatalytic performance

Self-supporting PtPd bimetallic catalysts with three-dimensional (3D) porous structures and a greatly enhanced surface area are firstly fabricated at a glassy carbon electrode (GCE) by a one-step strategy of potentiostatic co-electrodeposition utilizing hydrogen bubble dynamic templates. The atomic ratio of Pt/Pd in the bimetallic catalysts is varied by changing the composition of the electrodeposition solution. The 3D porous PtPd films are characterized by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) and examined as electrocatalysts for the electro-oxidation of methanol using cyclic voltammetry (CV), chronoamperometry and electrochemical impedance spectroscopy (EIS). Experimental results demonstrate that a small amount of Pd plays the predominant role in the formation of 3D porous structure for PtPd bimetallic catalysts and is an excellent catalytically enhancing agent for the Pt catalyst towards methanol electro-oxidation. The study on electrocatalytic performance of mono and bimetallic catalysts towards formic acid electro-oxidation also reveals the better activity of 3D porous Pd film for this reaction.     

Seasonal performance of a central air conditioner in Dhahran,Saudi Arabia. A computer simulation studyPerformance saisonnière d'un conditionneur d'air central de Dhahran,Arabie Saoudite. Simulation par ordinateur

Seasonal performance of four standard, residential-sized, central air conditioners in a typical hot and humid climate of Gulf environment was measured. A computer model was developed to stimulate the residential building cooling loads and the resulting seasonal energy consumption. For an average 100 m² residence located in Dhahran, equipped with a 17.6 kW air conditioner, simulations show a consumption of ≈22200 kWh of electricity for space cooling over 2600 operation hours, this being within 13% of the measured value. The seasonal performance of three lower capacity (10.5, 12.3 and 14.0 kW) air conditioners for the same duty was also predicted. With the 14.0 kW capacity unit the electricity consumption is reduced by ≈ kWh and can satisfy the load for 96.6% of the time. The smallest (10.5kW) of the four systems can supply the house cooling load for only ≈78% of the time with a seasonal energy consumption of 17 350 kWh.     

Simultaneous preparation of TiO2 and ammonium alum,and microporous SiO2 during the mineral carbonation of titanium-bearing blast furnace slag

In this study, a route for simultaneous mineralization of CO₂ and production of titanium dioxide and ammonium alum, and microporous silicon dioxide from titanium-bearing blast furnace slag (TBBF slag) was proposed, which is comprised of (NH₄)₂SO₄ roasting, acid leaching, ammonium alum crystallization, silicic acid flocculation and Ti hydrolysis. The effects of relevant process parameters were systematically investigated. The results showed that under the optimal roasting and leaching conditions about 85% of titanium and 84.6% of aluminum could be extracted while only 30% of silicon entered the leachate. 84% of Al³⁺ was crystallized from the leachate in the form of ammonium aluminum sulfate dodecahydrate with a purity up to 99.5 wt%. About 85% of the soluble silicic acid was flocculated with the aid of secondary alcohol polyoxyethylene ether 9 (AEO-9) to yield a microporous SiO₂ material (97.4 wt%) from the crystallized mother liquor. The Al- and Si-depleted solution was then hydrolyzed to generate a titanium dioxide (99.1 wt%) with uniform particle size distribution. It was figured out that approximately 146 kg TiO₂ could be produced from 1000 kg of TBBF slag. Therefore, the improved process is a promising method for industrial application.     

New device and method for measuring thermal conductivity of thin-films

Thermal sensitive paints (TSPs) are used for global nonintrusive detection of boundary layer transition in flow over the surface of wind tunnel research models. Since the transition is a transient process, the TSP should have a fast response characteristic. A low paint thermal conductivity is required for fast response. A thin-film thermal conductivity meter (TFTCM) was designed and built to measure thermal conductivity of the TSPs, which are typically between 50 and 150 microm thick. In this paper, the design and operating features of the TFTCM are described. Measurement of the thermal conductivity with this TFTCM of three standard thin-film low conductivity specimens, Kapton, Teflon, and Borofloat glass, showed good agreement with the manufacturer quoted values, thus validating the instrument and the procedure. Consistently repeatable values for thermal conductivity (k=0.41 +/- 0.02 W/m K) were also obtained for the TSP specimen (TSB-B, 75 microm) tested.     

Vibration analysis of orthotropic circular and elliptical nano-plates embedded in elastic medium based on nonlocal Mindlin plate theory and using Galerkin method

In the present study a continuum model based on the nonlocal elasticity theory is developed for free vibration analysis of embedded orthotropic thick circular and elliptical nano-plates rested on an elastic foundation. The elastic foundation is considered to behave like a Pasternak type of foundations. Governing equations for vibrating nano-plate are derived according to the Mindlin plate theory in which the effects of shear deformations of nano-plate are also included. The Galerkin method is then employed to obtain the size dependent natural frequencies of nano-plate. The solution procedure considers the entire nano-plate as a single super-continuum element. Effect of nonlocal parameter, lengths of nano-plate, aspect ratio, mode number, material properties, thickness and foundation on circular frequencies are investigated. It is seen that the nonlocal frequencies of the nano-plate are smaller in comparison to those from the classical theory and this is more pronounced for small lengths and higher vibration modes. It is also found that as the aspect ratio increases or the nanoplate becomes more elliptical, the small scale effect on natural frequencies increases. Further, it is observed that the elastic foundation decreases the influence of nonlocal parameter on the results. Since the effect of shear deformations plays an important role in vibration analysis and design of nano-plates, by predicting smaller values for fundamental frequencies, the study of these nano-structures using thick plate theories such as Mindlin plate theory is essential.     

Selective Electroanalytical Method for the Determination of Roxarsone in Poultry Feed and Litter

An extremely sensitive and selective voltammetric method was developed for the determination of roxarsone (ROX) at a newly modified carbon paste microelectrode in Britton–Robinson buffer (BRB) at pH 2.0. The electrode is based on a disposable plastic pipette tip filled with carbon paste based on a mixture of graphite powder and Amberlite XAD-4 (5:1, w/w). The experimental parameters, such as pH, type of the buffer, mode of voltammetry, accumulation potential, accumulation time, and stirring rate were optimized. The reduction peak current dependences were linear for the concentration of ROX from 2.0 to 100 μM. The method showed reproducible results with RSD (n?=?11) of <2.0 %. The limit of detection (LOD) and limit of quantification (LOQ) were 0.53 and 1.76 μM, respectively. ROX showed that there was no apparent surface passivation indicating the suitability of the modified electrode for ROX detection. The developed method was successfully applied for the determination of ROX in poultry feed and poultry litter collected from various localities of Hyderabad.     

Effect of microwave irradiation on crystal growth of zeolitized coal fly ash with different solid/liquid ratios

In the present work, coal fly ash (CFA) was converted to zeolite (CFAZP) experimentally at atmospheric pressure via a conventional hydrothermal heating for 6 h at low temperature (90 ± 3 °C) followed by microwave irradiation for 30 min. The synthesized products were characterized using XRD, TGA/DTA, SEM, PSD, BET, and cation-exchange capacity (CEC) techniques. The effect of microwave on the crystal growth of nucleated CFAZP at different solid/liquid ratios (suspended CFA mass to NaOH solution volume, g/mL) was studied. A three-variable, three level central composite statistical experimental design was applied to investigate the effect of the independent variables on the response function defined as the ratio of the characteristic peak intensity at 2θ: 28° of a sample to that of the same peak of a sample run for 24 h with conventional heating. The relative peak intensity of CFAZP as high as 97% was achieved under optimum experimental conditions with 1 M of NaOH concentration, 6 h of conventional heating followed by 30 min microwave irradiation with a solid/liquid ratio of 0.40 g/mL. Under constant microwave energy, higher solid/liquid ratios led to higher relative peak intensity of the product.     

Analytical solution for bending of moderately thick radially functionally graded sector plates with general boundary conditions using multi-term extended Kantorovich method

An analytical solution for bending of radially functionally graded (RFG) sector plates is presented using multi-term extended Kantorovich method (MTEKM). Utilizing the principle of minimum total potential energy the governing equations are derived based on a first-order shear deformation theory and converted into two sets of coupled ordinary differential equations (ODEs) using MTEKM. Next, the derived sets of ODEs are solved analytically by the application of state-space method. Various examples are investigated by the present method and also solid sector plates are studied as special cases. Results of the present method are compared to those obtained by finite element method (FEM) and also available published works in the literature. It is found that the method proposed here exhibits a high convergence rate as well as presenting accurate results in all cases.