High level of laccases production by Trametes trogii culture on olive mill wastewater‐based media,application in textile dye decolorization

BACKGROUND: Laccases are receiving increasing attention as potential industrial enzymes in various applications. Therefore, it is important to find inexpensive and optimized media for large‐scale commercial production. The present work aims to valorize olive mill wastewater (OMW) by its use as base media for laccases production by Trametes trogii and use of the laccases produced for decolorizing textile dyes. RESULTS: A high yield of 25 120 U L^?1 of laccases was obtained at an OMW:water ratio of 80:20 enriched with 2 g L^?1 of urea corresponding to initial biochemical oxygen demand (BOD₅), chemical oxygen demand (COD) and total phenol concentrations of 18.4, 46 and 4.6 g L^?1 respectively. The partially purified laccases resulted in 85% decolorization of blue tubantin GLL 300 and black tubantin VSF 600, and 45% decolorization of blue solophenyl after 6 h of incubation. Subsequent additions of the same dye dose to the reaction mixture resulted in a very significant decrease in laccases activity after the third dye addition. CONCLUSION: The use of OMW for laccases production is a cost effective process. The laccases produced can be applied to the decolorization of textile wastewaters. Copyright © 2009 Society of Chemical Industry     

Nonequilibrium behavior in the Al-Ge alloy system: Insights into the metastable phase diagram

The competitive formation of metastable and stable phases during nonequilibrium processing of Al-Ge alloys and the corresponding metastable phase equilibria have been investigated. For germanium concentrations in the range 30 to 50 at. pct, it is shown that the four metastable phases can be ranked in order of decreasing stability as follows: monoclinic (P2₁/c), rhombohedral (R-C), orthorhombic (Pbca), and hexagonal (P6/mmm). Their formation depends not only on the transformation temperature(e.g., the liquid undercooling), but also on the presence of appropriate heterogeneous nucleation sites. For example, the orthorhombic phase has only been observed in amorphous films after rapid annealing/crystallization treatments. It is also shown that all of these phases form metastable equilibria with α-aluminum only,i.e., no metastable phase equilibria appear to exist between any metastable phase and β-germanium or between any two metastable phases. Consequently, it is not possible to draw a single metastable phase diagram that incorporates all of these phases with phase boundaries that represent their metastable equilibria; rather, separate diagrams should be drawn for each metastable phase. It is noted that these diagrams should extend only to the metastable phase field rather than all the way to pure germanium: for compositions richer in germanium, the results indicate that the metastable phase forms and then remelts upon the formation of germanium or a more stable, germanium-enriched metastable phase. Furthermore, it is proposed that this behavior is rather general in nature. Finally, it is concluded that the production of metastable phases in bulk form, in systems such as this where so many reactions occur simultaneously and competitively, might be impossible using solidification processing approaches. Formerly with the Department of Materials Science and Engineering, University of Washington, Seattle, WA 98195     

QoS‐aware broadcasting in VANETs based on fuzzy logic and enhanced kinetic multipoint relay

Vehicular ad hoc networks (VANETs) are emergent concepts in terms of infrastructure‐less communication. The data dissemination is usually done using broadcast schemes. Data broadcast in VANETs is a challenging issue due to the high mobility vehicles and the varying density. On one hand, these vehicles have to share and disseminate the safety‐critical information, in real time, to other intended vehicles. On the other hand, the existing broadcast solutions do not succeed, till now, to fulfill VANETs requirements especially in terms of performance and QoS. In this paper, we propose a new QoS‐aware broadcast method in order to face VANETs communications challenges. We choose to adapt a concept originally devoted to mobile ad hoc networks (MANETs) and join it to other specific VANET techniques to introduce a new broadcasting protocol in the aim of optimizing QoS fulfilment. The proposed solution is fundamentally based on enhanced kinetic strategy assisted with fuzzy logic for QoS‐aware multipoint relay (MPR). The protocol efficiency is eventually tested through an experimental study and compared with existing methods. The results prove the over‐performance of the proposed solution.     

An efficient JPEG-2000 based multimodal compression scheme

Multimedia Tools and Applications - In this paper, a wavelet-based multimodal compression method is proposed. The method jointly compresses a medical image and an ECG signal within a single codec,...     

Adaptation of a routing algorithm in wireless video sensor network for disaster scenarios using JPEG 2000

In this work we will develop an extension of one of existing routing algorithm in wireless sensor network. This new adaptation will permit the sensor node to save more energy and transmit images in wireless mode. This situation will be strategic and helpful especially in disaster scenario, where groups of rescuers must be on site to accomplish emergency tasks; therefore it’s very important and necessary to establish a wireless communication in real time between individuals or groups. The nature of wireless video sensor network makes it suitable to be used in the context of emergencies because introducing a video give more information in precise time and this is very advantageous when the existing infrastructure is down or severely overloaded. In emergencies the network topology may change rapidly and randomly. The increasing mobility of terminals makes them progressively dependent on their autonomy from the power source. This is illustrated by introducing many mobility models and using many scenarios of mobility in emergency situation, where image transmission via sensor node is used. Low complexity algorithm in image processing in order to reduce time transfer of selected data by this way allows saving energy. Efficiency in emergency scenario is the main objective of this work, achieved by the combination of three strategies: low-power mode algorithm, a power-aware routing strategy and compression technique in image processing used in sensor node. A selected set of simulations studies and real test bed on sensor node platform (Telos-B) indicate a reduction in energy consumption and a significant increase in node lifetime whereas network performance is not affected significantly. This is the big interest of our work in emergency situation, by increasing life time of node, individual can communicate longer and give more chance to rescuers to find them.     

Effects of mild heating and acidification on the molecular structure of milk components as investigated by synchronous front-face fluorescence spectroscopy coupled with parallel factor analysis

This paper reports the potential of synchronous front-face fluorescence spectroscopy in the characterization at the molecular level of milk changes during mild heating from 4 to 50 degrees C and acidification in the pH range of 6.8 to 5.1. Synchronous fluorescence spectra were collected in the 250-550 nm excitation wavelength range using offsets of 20, 40, 60, 80, 100, 120, 140, 160, 180, 200, and 240 nm between excitation and emission monochromators. The potential of parallel factor (PARAFAC) analysis in the decomposition of the whole synchronous fluorescence data set into the contribution of each of the fluorescent compounds present in milk has been investigated for heating and acidification data sets. Models were fitted from 1 to 7 components. Considering the core consistency values, PARAFAC models with three components have been considered. The first three components explained 94.43% and 94.13% of the total variance for heating and acidification data sets, respectively. The loading profiles of the first and second components derived from PARAFAC analysis performed on heating and acidification data sets corresponded quite well with the characteristics of tryptophan and vitamin A fluorescence spectra, respectively. The third component corresponded to the riboflavin fluorescence spectrum. Considering the heating experiment, the profile of the concentration mode for the second component showed large variations according to the temperature, which were assigned to the melting of triglycerides between 4 and 50 degrees C. For the acidification experiment, drastic changes in the concentration modes of the three components were observed for pH below 5.6, in agreement with structural changes in casein micelles.     

Analytical and Numerical Solution of the Stress Field and the Dynamic Stress Intensity Factors in a Cracked Plate under Sinusoidal Loading

A cracked plate subjected to a sinusoidal loading perpendicular to its plane is considered, and the analytical solution of the dynamic vibration behavior of a plate, which allowed the determination of the stress field near the crack tip, is developed. A mixed mode of loading near the crack tip has been established and described with dynamic stress intensity factors K _I (z,t) and K _II (z,t) associated with modes I and II crack openings, respectively. To validate the analytical results, a finite element analysis (FEA) of a 1 × 1 m square plate with a thickness of 1 cm, having a middle crack of 10 cm in length, is made. The results have shown significant agreement between analytical and FEA findings.     

Free convection enhancement in an annulus between horizontal confocal elliptical cylinders using hybrid nanofluids

ABSTRACT

In the present paper, natural convection in an annulus between two confocal elliptic cylinders filled with a Cu-Al₂O₃/water hybrid nanofluid is investigated numerically. The inner cylinder is heated at a constant surface temperature while the outer wall is isothermally cooled. The basic equations are formulated in elliptic coordinates and developed in terms of the vorticity-stream function formulation using the dimensionless form for 2D, laminar and incompressible flow under steady-state condition. The governing equations are discretized using the finite volume method and solved by an in-house FORTRAN code. Numerical simulations are performed for various volume fractions of nanoparticles (0?≤???≤?0.12) and Rayleigh numbers (10³?≤?Ra?≤?3?×?10⁵). The eccentricity of the inner and outer ellipses and the angle of orientation are fixed at e₁?=?0.9, e₂?=?0.6 and γ?=?0° respectively. It is found that employing a Cu-Al₂O₃/water hybrid nanofluid is more efficient in heat transfer rate compared to the similar Al₂O₃/water nanofluid.