Structural, morphological and mechanical characteristics of polyethylene, poly(lactic acid) and poly(ethylene-co-glycidyl methacrylate) blends

In this work, uncompatibilized and compatibilized blends of low density polyethylene (LDPE) and poly(lactic acid) (PLA) were subjected to several investigations: Fourier transform infrared (FTIR) spectroscopy, morphological analysis and mechanical testing (tensile, impact, microhardness). The copolymer (ethylene-co-glycidyl methacrylate) (EGMA) was used as compatibilizer. The percentages of PLA in LDPE/PLA samples ranged from 0 to 100 wt% while the EGMA was added to the blend 60/40 (LDPE/PLA) at concentrations of 2, 5, 7, 10, 15 and 20 parts per hundred (phr). FTIR analysis showed the absence of any interaction between LDPE and PLA, but after addition of compatibilizer, reactions between epoxy groups of EGMA and carboxylic or hydroxyl groups of PLA were confirmed. Tensile and impact tests revealed a loss of ductility of LDPE with the incorporation of PLA, except for the composition 80/20 (LDPE/PLA). However, the addition of 15 phr of EGMA led to the maximum increase in the elongation-at-break (about three times the value of uncompatibilized blend) and in the impact strength, but a marginal improvement was observed for tensile strength. SEM micrographs confirmed that the enhancement of mechanical properties is due to the improvement of the interfacial adhesion between different phases owing to the presence of EGMA. The microhardness values of the different blends (uncompatibilized or compatibilized) were in good agreement with the macroscopic mechanical properties (tensile and impact strengths).     

Characterization of Asphaltenes and Resins Separated from Water-in-Oil Emulsions

Abstract

Knowledge of the properties and behavior of asphaltenes and resins is indispensable for the design of preventive and curative measure for emulsion problems created by the presence of asphaltene, resins, and other organic and inorganic solids. In order to understand the phenomena of water-oil emulsions formed in Kuwaiti oil fields and determine the factors involved in the stabilization of these emulsions, the role of asphaltenes, resins and wax separated from various samples of oil field emulsions formed in Burgan oil field have been evaluated. Physicochemical properties of asphaltenes, resins, wax, and de-asphalted de-resined (DADR) oil samples have been studied via FT-IR, ¹H, and ¹³C NMR, elemental analysis, and differential scanning calorimetry (DSC). These emulsion samples contain different amounts of water ranges from 24 to 35%, asphaltene content ranges from 0.9 to 1.7%, and resin content from 3.7 to 4.6%. IR-FT spectra were performed to identify the various functional groups which have an effect on the stability of water-oil emulsions. The freezing behavior of an emulsion was characterized by differential scanning calorimetry to determine whether the water in the emulsion is free water or emulsified water.     

New Unsymmetrically Benzene-Fused Bis (Tetrathiafulvalene): Synthesis,Characterization, Electrochemical Properties and Electrical Conductivity of Their Materials

The synthesis of new unsymmetrically benzene-fused bis (tetrathiafulvalene) has been carried out by a cross-coupling reaction of the respective 4,5-dialkyl-1,3-dithiole- 2-selenone 6–9 with 2-(4-(p-nitrophenyl)-1,3-dithiole-2-ylidene)-1,3,5,7-tetrathia-s-indacene- 6-one 5 prepared by olefination of 4-(p-nitrophenyl)-1,3-dithiole-2-selenone 3 and 1,3,5,7-tetrathia-s-indacene-2,6-dione 4. The conversion of the nitro moiety 10a–d to amino 11a–d then dibenzylamine 12a–d groups respectively used reduction and alkylation methods. The electron donor ability of these new compounds has been measured by cyclic voltammetry (CV) technique. Charge transfer complexes with tetracyanoquino-dimethane (TCNQ) were prepared by chemical redox reactions. The complexes have been proven to give conducting materials.     

[NH3(CH2)2NH3][Co(SO4)2(H2O)4]: Chemical preparation, crystal structure, thermal decomposition and magnetic properties

Cobalt ethylenediammonium bis(sulfate) tetrahydrate, [NH₃(CH₂)₂NH₃][Co(SO₄)₂(H₂O)₄], has been synthesised by slow evaporation at room temperature. It crystallises in the triclinic system, space group , with the unit cell parameters: a = 6.8033(2), b = 7.0705(2), c = 7.2192(3) Å, α = 74.909(2)°, β = 72.291(2)°, γ = 79.167(2)°, Z = 1 and V = 317.16(2) Å³. The Co(II) atom is octahedrally coordinated by four water molecules and two sulfate tetrahedra leading to trimeric units [Co(SO₄)₂(H₂O)₄]. These units are linked to each other and to the ethylenediammonium cations through OW-H…O and N-H…O hydrogen bonds, respectively. The zero-dimensional structure is described as an alternation between cationic and anionic layers along the crystallographic b-axis. The dehydration of the precursor proceeds through three stages leading to crystalline intermediary hydrate phases and an anhydrous compound. The magnetic measurements show that the title compound is predominantly paramagnetic with weak antiferromagnetic interactions.     

Role of Zinc Oxide and Nickel Nanoparticles on EMI Shielding Behavior of Chopped Carbon Fibre/Electrospun Fibrous Cobalt Epoxy Composites in X and Ku Band Microwave Frequencies

Silicon - This work investigated the microwave scattering parameters along with mechanical properties of a wave shielding magnetic nickel nanoparticles Ni-chopped carbon fibre CCF-Electrospun...     

Synthesis of Mg-stabilized nitrogen-rich alpha-sialons along Si3N4–0.5Mg3N2:3AlN line via field-assisted sintering

The present study reports for the first time the synthesis and evaluation of magnesium (Mg)-doped nitrogen-rich (N-rich) sialon ceramics exploring the possible existence of Mg-stabilized single-phase alpha-sialon (on the Mg-alpha-sialon plane). Mg-stabilized N-rich sialons, with the general formula of Mg_xSi_12−2xAl_2xN₁₆ having x value in the range of 0.2–2.2 for the composition laying along the Si₃N₄–0.5Mg₃N₂:3AlN line, were synthesized at 1500°C, using nano-size starting powder precursors and field-assisted (or spark plasma) sintering technique. Consolidated sialon ceramic samples were characterized for their microstructure, phase stability regime, and physical and mechanical properties. Although a relatively low synthesis temperature was adopted, well densified sialon samples were achieved; however, the densification of the samples became difficult with a higher x value (containing high Mg₃N₂/AlN content). Contrary to what was expected to take place, a single-phase Mg-doped sialon was not obtained near the N-rich line (on Mg-alpha-sialon plane). Such distinctive behavior in Mg-doped sialons was supposed to be due to the formation of a highly stable Mg-containing aluminum nitride polytype phase, which consumed most of the high-temperature transient liquid phase. Mg-doped N-rich sialon sample having the maximum amount of alpha phase depicted a remarkable hardness (HV₁₀) of 21.4 GPa and a fracture toughness of 3.5 MPa m^1/2.