Mechanical behavior of a circular micro plate subjected to uniform hydrostatic and non-uniform electrostatic pressure

Circular micro plates are used in the many Microelectromechanical devices as micropumps and micro pressure sensors. All such systems exhibit a static instability phenomenon (Divergence) which is known as the “pull-in” instability. In this paper a distributed model was used to investigate the pull-in instability of a circular micro plate subjected to non-uniform electrostatic pressure and uniform hydrostatic pressure. The non-linear governing equation was derived and in order to linearize the obtained governing equations, step by step linearization method was used, then the linear system of equation was solved by finite difference method. The obtained results for only electrostatic actuation were compared with the existing results and good agreement has been achieved. There are exist two method of actuation. The pull-in voltages for these two actuation mechanism were investigated and the obtained results exhibited different effects on each actuation mechanism.     

Original Mineralogy and Recognition of Upper Boundary of the Sarvak Formation Based on Geochemistry and Isotope Studies

Carbonate sequence of upper cretaceous (Cenomanian) of Sarvak Formation is a part of Bangestan Group with the thickness of 760 m in Ahvaz oil field (well no. 63). This formation is overlain by the Kazhdumi Formation and is uncomfortably underlain by the Ilam Formation. In this study major and minor elements and carbon and oxygen isotope values and bivariate plot of them indicate that aragonite was the original carbonate mineralogy of the Sarvak Formation. Variations of Sr/Ca and δ¹⁸O values versus Mn also illustrate that they were affected by nonmarine diagenesis in a nearly closed system. Recognition of the exact boundary between the Sarvak and Ilam Formations is difficult, due to similar lithologies. So in this study, elemental and oxygen and carbon isotope analysis were used to determine the exact boundary between these Formations. Geochemical data clearly indicate a sub aerial exposure surface, below which meteoric diagenesis effected the sediments.     

Soil organic matter in restored rangelands following cessation of rainfed cropping in a mountainous semi-arid landscape

Agricultural abandonment is known to influence plant cover composition and C inputs into the soil with a consequence for changes in soil organic matter (SOM) storage and dynamics in rangeland ecosystems. This study was conducted on a chronosequence of high altitude rangelands (1) cultivated with rainfed wheat (CR0), (2) abandoned for 4 (AR4), 12 (AR12) and 45 (AR45) years and (3) uncultivated (reference) rangelands (UR) with three replicates in Zagros Mountains, Central Iran. We studied the changes in the concentrations and stocks of bulk soil organic carbon (OC), total N, particulate organic C (POC) and N (PON), dissolved organic C (DOC), microbial biomass C (MBC), and potentially mineralizable C (Min-C) at 0–0.15 and 0.15–0.3 m soil depths. Results showed that the concentrations and stocks of OC, N, and labile fractions increased with the abandonment of agriculture at both soil sampling depths. After 4–45 years of agricultural abandonment, soil OC and N stocks increased logarithmically by 3.8–46 % and 2.8–32 % in the whole 0–0.3 m, respectively. Although, the stocks of labile fractions decreased slightly 4 years after agricultural abandonment, there were considerable increases (logarithmic) in these fractions after 12–45 years of abandonment (POC, 65–148 %; PON, 68–147 %; DOC, 76–139 %; MBC, 24–62 %). The study shows that rangelands abandoned for 45 years contained lower soil OC and N concentrations and stocks compared to uncultivated rangelands, reflecting 45 years of abandonment would not be sufficient for SOM to attain the level of uncultivated rangelands. The present study provided evidence that the rate of increases in POC and DOC stocks was greater than that of OC and MBC stocks, demonstrating POC and DOC fractions of total SOM pool may be suitable and sensitive indicators for detecting the effects of agricultural abandonment on soil OC changes and storage in these restored semi-arid rangelands. Soil bulk density decreased, while the mean weight diameter (MWD) and aggregate ratio as measures of aggregate stability increased considerably within the abandoned rangelands with increasing time of abandonment. Results from a multivariate analysis suggested that soil variables such as bulk density, OC, TN, DOC, POC, PON, MBC, MWD and metabolic quotient (qCO₂) were successful in separating land uses. In brief, the abandonment of agricultural activities in previously cultivated high altitude rangelands can potentially lead to an increase of total and labile SOM and also sequestration of C in these semi-arid rangelands.     

Magnetoelectric effect in Pb(Zr0.95Ti0.05)O3 and CoFe2O4 heteroepitaxial thin film composite

Multiferroic epitaxial films, include SrRuO₃/Pb(Zr_0.95Ti_0.05)O₃/CoFe₂O₄ has been successfully deposited on SrTiO₃ substrate by pulsed-laser deposition technique. The results show that the prepared films exhibit a single phase. The Pb(Zr_0.95Ti_0.05)O₃ (PZT) film was highly textured with (1 0 0) orientation and gives good ferroelectric properties with saturated polarization of 15 μC/cm². The magnetic coercivity of CoFe₂O₄ film on Pb(Zr_0.95Ti_0.05)O₃ has been dampened to 0.9 kOe. The anisotropic magnetically behavior of CoFe₂O₄ film was changed to isotropic by using high Zr concentrated PZT as underneath layer. Heterostructure films show a good ferromagnetic and ferroelectric coupling that lead to the large magnetoelectricity of 287 mV/cm Oe.     

Influence of plasmon destructive interferences on optical properties of gold planar quadrumers

Arrays of planar symmetric gold quadrumers consisting of a central nano-disc surrounded by three similar nano-discs belonging to the D(3h) point group were designed and fabricated. Since the geometrical configuration of quadrumers is the same as planar trigonal molecules, nano-discs can play the roles of artificial atoms to study the coupling trends among them. The plasmonic properties of the nano-disc structures are investigated by reflection spectrum measurement and finite-difference time-domain calculation with good agreement. Plasmon interaction among the nano-discs is also studied via a mass-spring coupled oscillator model. A pronounced Fano resonance (FR) is observed for the fabricated nano-discs with inter-disk gaps of around 18 nm during light irradiation at normal incidence. Although the obtained FR is independent of the excitation polarization, the near-field energy spatial distribution can be flexibly tuned by the polarization direction. This has potential applications in nano-lithography, optical switching and nonlinear spectroscopy.     

Incorporation of Iron Nanoparticles into Silicon Carbide Nanoparticles as Novel Antimicrobial Bimetallic Nanoparticles

Silicon - Zero valent iron nanoparticles have an attracting and ever growing interest in various research fields due to the fascinating potential. In the present work, antimicrobial activity of...     

Elastic buckling of uniaxially loaded skew plates containing openings

The paper is concerned with elastic buckling behavior of uniaxially loaded skew plates with openings. Simply supported and clamped plates subject to uniaxial compression in the longitudinal direction are studied. Two different shapes of openings, circular and skew of different sizes, are considered. The finite element software package ABAQUS has been employed to analyze the plates. Effects of parameters such as skew angle, size, shape and position of openings and aspect ratio of the plates are examined. Results are presented in the form of plots showing the variation of buckling coefficient against the parameters studied.     

Calculation of Electrical Potential and Dust Particle Charge in a Double Dusty Plasma Device

Dusty plasma consists of macroscopic particles of nanometer to micrometer size immersed in a gaseous plasma environment. It can be observed by introducing a flow of molecular impurity in a double plasma device. The impurity particles will be charged quickly, while keeping relatively in low temperature. The particles typically attain several hundred or thousand elementary charges due to the inflow of plasma electron and ions. The dust particles potential and electrical charge in plasma with two ions at different temperatures is calculated. Electrical charge of dust particles is self consistently determined by local plasma electron and ion currents. It is found out that the dust particle potential is strongly affected by the mass and temperature difference of plasma ions.     

Effect of short annealing times on the magnetoelectronic properties of Co/Pd-based pseudo-spin-valves

We investigated the effects of short annealing times on the magnetoelectronic properties of pseudo-spin-valves (PSV) with perpendicular magnetic anisotropy based on Co/Pd multilayers using a contact hot plate. In order to study the time scale at which the degradation of film properties occurs for possible application in perpendicular MgO-based magnetic tunnel junctions (MTJ), the results were compared against our previous study of Co/Pd PSV based on vacuum annealing. With contact annealing for up to 90 s, no significant changes to the current-in-plane giant magnetoresistance (CIP-GMR), interlayer coupling, sheet resistance and layer coercivities were observed for up to 200 degrees C. At 350 degrees C, a 39 to 46% decrease in CIP-GMR was observed for annealing times of 30 to 90 s, respectively, slightly lower than that observed for vacuum annealing at 230 degrees C for 1 h. Similar results were also obtained for interlayer coupling, sheet resistance and layer coercivities, indicating that short annealing times allow for reduced interlayer diffusion at higher temperatures. However, it is clear that significant degradation of GMR performance occurs at 350 degrees C and above even for annealing times as short as 30 s, indicating the potential difficulty of realizing Co/Pd-based perpendicular MgO-MTJ.     

Modeling of the Seedless Grape Drying Process using the Generalized Differential Quadrature Method

Mathematical modeling of the grape drying process is important in understanding the transport phenomena involved in the production and processing of dried grapes. Drying models proposed in the literature have simplifying assumptions, and thus ignore important phenomena such as shrinkage and changes in transport properties which occur during the drying process. Consequently, a mathematical model is developed for the seedless grape drying process, which considers the effects neglected in previous models. Since an analytic solution to this nonlinear model is impossible, the generalized differential quadrature method is used to solve the models' equations. The model is validated with experimental data obtained from a laboratory scale convective tray dryer operating at 50–70 °C and an air velocity of 1.5 m/s. Model predictions are in close agreement with experimental data due to the inclusion in the model of shrinkage and variation in moisture diffusivity. Model results can serve as a framework to improve the performance of existing and novel dryers, and also in the design of process simulators for dryers.