降低烧结返矿率的途径与实践

通过对影响烧结返矿率的因素进行分析，从优化配料、强化制粒和造球、提高料层厚度、实现低碳低水均质烧结等几个方面着手，使烧结返矿率从1998年的23．6％降到了2003年的16．9％。     

Effect of Y2O3, CeO2 on Sintering Properties of Si3N4 Ceramics

The effect of rare earth oxides Y203 or Ce02 on sintering properties of Si3N4 ceramics was studied and the mechanism of assisting action during sintering was analyzed. The results in dicate that the best sintering properties appear in Si3N4 ceramics with 5% Y203 or 8% CeO2. Secondary crystallites are formed at grain boundaries after heat treatment,which decreases the amount of glass phase and contributes to the improvement of high-temperature mechanical properties of silicon nitride.     

微波仪器远程自动测试系统的设计与实现

针对大多通信测试仪器仅局限于本地测试监控的现状,提出了一种将本地测试仪器用于对远程微波设备进行测试监控的开发模式,从而实现了远程仪器的自动化测试。分别就系统中的关键技术和交互方式作了详细的介绍,得出系统具有较强的可扩展性,且简单易操作的特点,相信该系统会有广阔的的应用前景。     

本钢炼焦煤最佳配比分析

结合本钢的生产实际，对炼焦煤的最佳配比作了比较具体的分析，同时对资源，质量、成本也作了比较详细的调查，并提出了本钢焦化厂最佳配煤比方案，由此可看出，最大限度地降低采购成本，继续开发合理的配煤比例，具有广阔的前景。     

A probabilistic method for the design of power grounding systems

An improved multivariable, probabilistic method for the safety analysis of power grounding systems is presented. The application of this method is demonstrated in four examples. The first three examples illustrate the practical evaluation of one new and two existing substation grounding grids when the substation is connected to an overhead distribution system. The fourth example ascertains the relative impact of a difference between the S curve of IEC Publication 479 and Dalziel's equation for the allowable body current used in ANSI/IEEE Std 80-1986 on the validity of an exposure model based on the requirements of Std 80. In this example, the statistical data on ground faults have been taken from actual system records. Further possible refinements of the exposure model are discussed     

新型复合弹簧的研究

提出一种金属圆锥弹簧与橡胶圆锥弹簧复合而成的弹簧．分析表明：它可以应用于弹性耦合激励振动筛和座式直线振动筛。     

Enhanced electron emission from phosphorus-doped diamond-cladsilicon field emitter arrays

Undoped and phosphorus (P)-doped diamond-clad Si field emitter arrays have been successfully fabricated using microwave plasma chemical vapor deposition (MPCVD) technology. The electron emission from the blunt diamond-clad microtips are much higher than those for the pure Si tips with sharp curvature due to a lower work function. Furthermore, the characteristics of emission current against applied voltage for the P-doped diamond-clad tips show superior emission at lower field to the undoped ones. After the examination of Auger electron spectroscopy (AES) and electrical characteristics of as-grown diamond, such a significant enhancement of the electron emission from the P-doped diamond-clad tips is attributed to a higher electron conductivity and defect densities     

Exact evaluation of laser linewidth requirements for optical PSKhomodyne communication systems with balanced PLL receivers

The power penalty induced by imperfect phase recovery in PSK homodyne communication systems with balanced phase-locked loop receivers are exactly evaluated. Optimum phase deviations between the mark-state and the space-state bits are used in this study. This study for the first time shows the imperfect-phase-recovery-induced power penalty as a function of laser linewidth with optimum phase deviations considered. It can be estimated from the theoretical result that an optimal balanced PLL receiver requires the laser linewidth as Δν⩽1.15×10^-6× (bit rate) in contrast to the previous reported one Δν⩽5.88×10^-6× (bit rate). We also point out here that the previously reported laser linewidth requirement was wrongly estimated     

Role of macrophage overactivation in the development of acute pancreatic injury in rats

PURPOSE: To report quantitative changes in the anterior chamber configuration after small-incision cataract surgery with implantation of a posterior chamber intraocular lens by means of ultrasound biomicroscopy. METHODS: We examined the anterior chamber configuration of 20 eyes of 20 patients before and 3 months after small-incision cataract surgery (phacoemulsification and aspiration plus foldable intraocular lens implantation through a 3.0- to 4.0-mm self-sealing wound) by means of ultrasound biomicroscopy. The following variables were measured: the anterior chamber depth at the center of the cornea, the angle-opening distance 250 microns from the scleral spur (AOD250), the angle-opening distance 500 microns from the scleral spur (AOD500), and the trabecular-iris angle. RESULTS: The anterior chamber depth at the center of the cornea, AOD250, AOD500, and trabecular-iris angle increased significantly after surgery. The preoperative anterior chamber depth at the center of the cornea and trabecular-iris angle were negatively correlated with the differences between the postoperative and preoperative values (P < .01). The preoperative values of all variables examined were negatively correlated with the ratios of the postoperative value to the preoperative value (P < .002). CONCLUSIONS: The present results showed that small-incision cataract surgery significantly deepened the anterior chamber and widened its angle. The more shallow the preoperative anterior chamber was, the greater the postoperative change of the chamber was; and the more narrow the preoperative angle was, the greater the postoperative change of the angle was.