Cooling condition dependence on ion etching rate in a softmagnetic metallic glass

Taking into consideration the knock-on cascade mechanism and the free volume theory, the cooling condition dependentR _s (ion etching rate) is investigated for a liquid-quenched Fe-10at%Si-15at%B alloy glass. A highR _s is found in a slow cooled glass.     

Gain saturation dependence on signal wavelength in a travelling-wave semiconductor laser amplifier

Gain saturation dependence on signal wavelength in a 1.5 ?m InGaAsP travelling-wave semiconductor laser amplifier is experimentally studied. Saturation output powers were 6.9dBm, 8.3dBm and 10.6dBm for signal wavelengths of 1490 nm, 1510 nm and 1540 nm, respectively. This saturation dependence on wavelength, i.e. higher saturation output power for longer signal wavelength, results from signal gain peak shift towards longer wavelength with increasing input power.     

Using precise data sets on farming and pesticide properties to verify a diffuse pollution hydrological model for predicting pesticide concentration.

Verification of a diffuse pollution model involves comparing results actually observed with those predicted by precise model inputs. Acquisition of precise model inputs is, however, problematic. In particular, when the target catchment is large and substantial estimation uncertainty exists, not only model verification but also prediction is difficult. Therefore, in this study, rice-farming data were collected for all paddy fields from all farmers in a catchment and pesticide adsorption and degradation rates in paddy field soil samples were measured to obtain precise model inputs. The model inputs successfully verified the model's capability to predict pesticide concentrations in river water. Sensitivity analyses of the model inputs elucidated the processes significantly affecting pesticide runoff from rice farms. Pesticide adsorption and degradation rates of the soil did not significantly affect pesticide concentrations, although pesticide discharge to river water accounted for less than 50% of the total quantity of pesticide applied to fields, possibly owing to pesticide adsorption and degradation. The timing of increases in pesticide concentrations in river water was affected mostly by the farming schedule, including the time of pesticide application and irrigation, and secondarily by rainfall events.     

Silicon nitride thin-film deposition by LPCVD with in situ HF vaporcleaning and its application to stacked DRAM capacitor fabrication

Silicon nitride film deposited by LPCVD with newly developed in situ HF vapor cleaning has been studied and applied to fabricate dielectric films for stacked DRAM capacitors. Using this method, an oxide-free surface of underlaid poly-Si can be obtained. Silicon nitride film deposited on this surface has been verified by FTIR measurement to have the stoichiometrically proper composition of Si₃N₄ . However, the film was found to be selectively deposited on poly-Si electrodes. This selective deposition degrades the reliability of the stacked capacitor, because the silicon nitride can not completely cover the periphery of poly-Si electrodes on SiO₂. We propose a simple process that avoids the problem making it possible to apply silicon nitride film to stacked-capacitor fabrication. Stacked capacitors fabricated by this process exhibit very low leakage current and high electrical reliability even for ultra-thin silicon nitride films less than 5 nm thick     

A 64-Mb DRAM with meshed power line

A 64-Mb dynamic RAM (DRAM) has been developed with a meshed power line (MPL) and a quasi-distributed sense-amplifier driver (qDSAD) scheme. It realizes high speed, t_RAS=50 ns (typical) at V_cc=3.3 V, and 16-b input/output (I/O). This MPL+qDSAD scheme can reduce sensing delay caused by the metal layer resistance. Furthermore, to suppress crosstalk noise, a V_SS shield peripheral layout scheme has been introduced, which also widens power line widths. This 64-Mb DRAM was fabricated with 0.4-μm CMOS technology using KrF excimer laser lithography. A newly developed memory cell structure, the tunnel-shaped stacked-capacitor cell (TSSC), was adapted to this 64-Mb DRAM     

The effects of leukotrienes C4 and D4 on ciliary activity of human paranasal sinus mucosa in vitro

The effects of leukotrienes C4 and D4 on ciliary activity of human paranasal sinus mucosa were investigated in vitro. Normal mucosa was surgically obtained from human paranasal sinuses and incubated in the form of tissue culture. Ciliated cells were magnified under an inverted microscope, and ciliary activity was photoelectrically measured. LTD4 progressively inhibited ciliary activity, and showed a more potent effect on ciliary activity compared to LTC4. The concentrations of LTC4 and LTD4 in the incubation medium were determined by radioimmunoassay when the mucosa was incubated with 10(-8) M LTC4. The concentration of LTD4 gradually increased and after 90 min reached the maximum of 0.71 x 10(-8) M, while that of LTC4 was reduced to about 10% of its initial concentration within 60 min. These results suggested the possible conversion of LTC4 to LTD4 on the mucosa, and that LTC4 can inhibit ciliary activity by means of LTD4.     

Optical filtering to reduce chirping influence in LD wavelength conversion

The use of an optical filter to reduce chirping influence in LD wavelength conversion is demonstrated. A part of broadened spectrum of wavelength-converted light is eliminated by a narrow-band optical filter, and sensitivity degradation due to frequency chirping is reduced as a result. In an experiment using a fiber Fabry-Perot filter, the sensitivity was improved by about 1.5 dB in 1.55-/spl mu/m transmissions with normal dispersion fibers when an LD converter was biased at two times the threshold current.     

Athermal silica-based arrayed-waveguide grating multiplexer

A temperature dependent channel wavelength shift in a silica-based arrayed-waveguide grating multiplexer is successfully suppressed from 0.95 to 0.05 nm in the 0-85°C temperature range, which means that it can be used in practical WDM systems without the need for temperature control