A New Aqmeoes Injection Molding Method of Fabricating W-Cu Parts

The present work illustrates the use of water-soluble cupric(II) salts as ingredients of binder for injection molding of W-10 wt.% Cu. The parts produced are dense, homogeneous and have good surface finish, compared to those produced using conventional binder systems. This new binder system, named Cu-containing binder (CCB), also provides process-simplification benefits. CuCl₂ and Cu(NO₃) ₂ with the purity of 98% were selected for this study. A rapid two-stage process involving drying and thermal decomposition was successful in removing nonmetatlic constituents from 2 to 3 hours. Final density that is above 97% of theoretical value was obtained.     

Nitrogen solubility in CaO-CaF2-SiO2 melts

The preceding paper^[5] demonstrated that nitrogen dissolves in silicate melts either as a free ion or complex anion, being incorporated into silicate networks. In the present study, the influence of CaF₂ addition to CaO-SiO₂ melts on the nitrogen solubility was investigated along the liquidus at 1573 K and within the liquidus at 1723 K at constant CaF₂ levels. In the latter case, as the SiO₂ content increases from CaO saturation, the total nitrogen content decreases to reach the minimum and then starts to increase up to the SiO₂ saturation. This is in accord with the abovementioned mechanism of nitrogen dissolution, which is supported by the changing behavior of free and incorporated nitrogen contents with the slag composition. The role of CaF₂ is complicated through the formation of fluorosilicates. The CaF₂ seems not to function simply as a diluent but to enhance the dissolution of nitrogen by releasing oxygen from silicate networks, promoting the formation of free nitride ions. Formerly Graduate Student, Department of Metallurgy, The University of Tokyo.     

Degeneration at the insertion weakens the tensile strength of the supraspinatus tendon: a comparative mechanical and histologic study of the bone-tendon complex

The purpose of this investigation was to determine the relationship between the degree of degeneration at the supraspinatus insertion, the tensile strength, and the site of failure of this tendon. Thirty-three fresh cadaveric shoulders (average age: 62 years; range: 39-83 years) were examined. A tensile load to failure was applied at a constant crosshead speed of 25.4 mm/min to a 10 mm wide strip of the supraspinatus tendon that remained attached to the bone. Preexisting degenerative changes at the insertion were assessed and scored histologically and compared with the ultimate tensile stress. Twenty tendons failed at the insertion (the insertion group), and 11 failed in the midsubstance (the midsubstance group). The histologic score of degeneration for the insertion group was significantly higher than that for the midsubstance group (p = 0.0026). There was a negative correlation between the ultimate tensile stress at the insertion and the degeneration score for the insertion group (r = -0.60; p = 0.013). Histologic observations revealed that disruptions of tendon fibers were located mostly in the articular half of the tendon and that they enlarged during mechanical testing in 90% of the specimens of the insertion group. It seems that degenerative changes at the supraspinatus insertion reduce the tensile strength of the tendon and constitute a primary pathogenetic factor of rotator cuff tear.     

A super-dynamic flip-flop circuit for broad-band applications up to24 Gb/s utilizing production-level 0.2-μm GaAs MESFETs

This paper describes a novel dynamic flip-flop (FF) circuit that can operate 30% faster than conventional clocked inverter-type FFs. A new wideband clock buffer is introduced to cover the FF operation range. An 8- to 24-Gb/s decision circuit and a 9- to 26-GHz 1/2 frequency divider were developed utilizing production-level 0.2-μm GaAs MESFET technology     

Environmental protection: researches in National Institute of Radiological Sciences

Some studies for radiological protection of the environment have been made at the National Institute of Radiological Sciences (NIRS). Transfer of radionuclides and related elements has been investigated for dose estimation of non-human biota. A parameter database and radionuclide transfer models have been also developed for the Japanese environments. Dose (rate)-effect relationships for survival, growth and reproduction have been investigated in conifers, Arabidopsis, fungi, earthworms, springtails, algae, duckweeds, daphnia and medaka. Also genome-wide gene expression analysis has been carried out by high coverage expression profiling (HiCEP). Effects on aquatic microbial communities have been studied in experimental ecosystem models, i.e., microcosms. Some effects were detected at a dose rate of 1 Gy day(-1) and were likely to arise from interspecies interactions. The results obtained at NIRS have been used in development of frameworks for environmental protection by some international bodies, and will contribute to environmental protection in Japan and other Asian countries.     

Thermodynamics of antimony,arsenic, and tin in CaO—CaF2 melts

In view of the importance of tramp element contamination of steel products through a large volume of scrap consumption in the near future, the thermodynamic behaviour of Sb, As, Sn and Cu in CaO—CaF₂ melts under reducing conditions was studied by examining the dependences of distribution of each element between Cu, Ag or Sn alloys and CaO—CaF₂ melts on the CaO activity, oxygen partial pressure and temperature around 1 500°C. As a result, the reaction products on treatment by Ca compounds were demonstrated to be Ca₃Sb₂, Ca₃As₂, Ca₂Sn and CaCu. Experimentally obtained distributions were extrapolated to lower oxygen partial pressures less than 10^?18 atm to estimate the feasibility of removing those tramp elements from molten iron. It is thermodynamically indicated that if the prevailing oxygen partial pressure of the environment is below 10^?23 atm, these impurities, except Cu, would be substantially removed from molten steel.     

Low-power 1:16 DEMUX and one-chip CDR with 1:4 DEMUX using InP-InGaAs heterojunction bipolar transistors

Using InP-InGaAs heterojunction bipolar transistor (HBT) technology, we have successfully designed and fabricated a low-power 1:16 demultiplexer (DEMUX) integrated circuit (IC) and one-chip clock and data recovery (CDR) with a 1:4 DEMUX IC for 10-Gb/s optical communications systems. The InP-InGaAs HBTs were fabricated by a nonself-aligned process for high uniformity of device characteristics and producibility. The 1:16 DEMUX IC and the one-chip CDR with the 1:4 DEMUX IC consist of approximately 1200 and 460 transistors, respectively. We have confirmed error-free operation at 10 Gb/s for all data outputs of both ICs. The 1:16 DEMUX IC and the one-chip CDR with the 1:4 DEMUX IC consume only 1 W and 950 mW, respectively. These results demonstrate the feasibility of InP-InGaAs HBTs for low power high-integration optical communication ICs.     

EM574, an erythromycin derivative, is a potent motilin receptor agonist in human gastric antrum

Erythromycin and its derivatives are known to induce phase III-like contractions, which are similar to those induced by motilin, in the human gastrointestinal tract during the interdigestive state, but few detailed in vitro studies have been reported. We evaluated EM574, an erythromycin derivative, as a motilin receptor agonist in the human gastric antrum in vitro, using contraction studies of muscle strips and isolated myocytes, receptor binding assay and tissue section autoradiography. EM574 stimulated contractions of muscle strips in a concentration-dependent manner (10(-7)-10(-5) M), and this contractile effect was unaffected by pretreatment with atropine or tetrodotoxin. Isolated myocytes contracted in response to EM574 with a peak shortening at 10(-7) M, which was comparable to the response to motilin. EM574 displaced specifically 125I-motilin bound to smooth muscle homogenates with a Kd value of 7.8 x 10(-9) M, compared with 4.5 x 10(-9) M for motilin. Film autoradiograms showed that 125I-motilin-binding sites were localized in the muscle layers, and that the labeling disappeared in the presence of a 1000 times molar concentration of EM574. We conclude that EM574 directly stimulates smooth muscle cell contraction by acting on motilin receptors in the human gastric antrum in vitro.     

Malignant mesenchymoma in the scrotum. A case report

A 67-year-old man visited our hospital with the chief complaint of painless swelling of the left scrotal content. An elastic hard mass was palpable in the left scrotum. Resection of the tumor, including the left scrotal skin, was performed. The tumor originated from the scrotal wall and did not communicate with the testis, the epididymis or spermatic cord. Histologically, the tumor was diagnosed as a malignant mesenchymoma composed of liposarcoma, chondrosacoma and osteosarcoma. Malignant mesenchymoma is very rare, especially in the scrotum. Our case that originated from the scrotal wall is the first one reported in Japan.     

Device modeling and simulations toward sub-10 nm semiconductordevices

This paper overviews the fundamental problems encountered in device modeling and simulations of sub-10 nm Si metal-oxide-semiconductor field-effect-transistors (MOSFETs). We focus on the two fundamental problems: the quantum effects and the effects associated with the long-range Coulomb potential. It is pointed out that these problems are profoundly related to the basic principles of device physics and even pose a question on the validity of the basic transport equation which the present device simulations are based on. We also review various approaches and methods taken to tackle those problems