Modeling and economic analysis of CO<Subscript>2</Subscript> separation process with hollow fiber membrane modules

The main purpose of the study was to develop a model using ASPEN and Excel simulation method to establish optimum CO₂ separation process utilizing hollow fiber membrane modules to treat exhaust gas from LNG combustion. During the simulation, optimum conditions of each CO₂ separation scenario were determined while operating parameters of CO₂ separation process were varied. The characteristics of hollow fibers membrane were assigned as 60 GPU of permeability and 25 of selectivity for the simulation. The simulation results illustrated that 4 stage connection of membrane module is required in order to achieve over 99% of CO₂ purity and 90% of recovery rate. The resulted optimum design and operation parameters throughout the simulation were also correlated with the experimental data from the actual CO₂ separation facility which has a capacity of 1,000 Nm³/day located in the Korea Research Institute of Chemical Technology. Throughout the simulation, the operating parameters of minimum energy consumption were evaluated. Economic analysis of pilot scale of CO₂ separation plant was done with the comparison of energy cost of CO₂ recovery and equipment cost of the plant based on the simulation model. This work was presented at the 6 ^th Korea-China Workshop on Clean Energy Technology held at Busan, Korea, July 4–7, 2006.     

Ce3+/Tb3+-coactived NaMgBO3 phosphors toward versatile applications in white LED,FED, and optical anti-counterfeiting

Ce³⁺/Tb³⁺ co-doped NaMgBO₃ phosphors were successfully synthesized by solid-state method. Under 381 nm excitation, the cyan emission owing to the 5d → 4f of Ce³⁺ ions and green emissions arising from the ⁵D₄ → ⁷F_J (J = 6, 5, 4, and 3) transitions of Tb³⁺ ions were seen in all the phosphors. Through theoretical analysis, one knows that the energy transfer from Ce³⁺ to Tb³⁺ ions with high efficiency of 83.74% was contributed by dipole–dipole transition. Furthermore, the internal quantum efficiency of NaMgBO₃:0.01Ce³⁺,0.03Tb³⁺ phosphor was 54.28%. Compared with that of at 303 K, the emission intensity of the developed products at 423 K still kept 73%, revealing the splendid thermal stability of the studied phosphors. Through utilizing the resultant phosphors as cyan-green components, the fabricated white-LED device exhibited an excellent correlated color temperature of 2785 K, high color-rendering index of 85.73, suitable luminance efficiency of 25.00 lm/W, and appropriate color coordinate of (0.4279, 0.3617). Aside from the superior photoluminescence, the synthesized phosphors also exhibited excellent cathode-luminescence properties which were sensitive to the current and accelerating voltage. Furthermore, the NaMgBO₃:0.01Ce³⁺,0.03Tb³⁺ phosphors with multi-mode emissions were promising candidates for optical anti-counterfeiting. All the results indicated that the Ce³⁺/Tb³⁺ co-doped NaMgBO₃ phosphors were potential multi-platforms toward white-LED, field emission displays, and optical anti-counterfeiting applications.     

Comparison of liquid-phase and methanol-swelling crosslinking processes of polyimide dense membrane for CO2/CH4 separation

To overcome the plasticization effect in polyimide membranes, many researchers have proposed crosslinking method. This can reduce an inter-segmental mobility by tightening and rigidifying the polymer chains. However, it is difficult to modify the whole polymer chains throughout the membrane because the reaction can be hindered by the diffusion rate of the crosslinker. In particular, it is hard for bulky crosslinker to penetrate a dense membrane with a small d-spacing. This study investigated the effect of crosslinking a dense Matrimid membrane with p-phenylenediamine (p-PDA) via two different crosslinking methods (i.e., methanol-swelling crosslinking process [M-SCP] and liquid-phase crosslinking process [L-PCP]). Most of the crosslinking reaction in M-SCP occurs on the membrane surface due to difficulty in penetration of the bulky p-PDA into the Matrimid dense membrane. In contrast, the L-PCP allows uniform crosslinking across the membrane. The membranes crosslinked using L-PCP showed excellent chemical resistance. Furthermore, the plasticization phenomenon was not observed in the membranes crosslinked using L-PCP with p-PDA more than 15%. Meanwhile, the membrane crosslinked using M-SCP exhibited poor plasticization and chemical resistance properties. These results showed that the L-PCP method can be more effective for the crosslinking of dense membrane to deliver both high plasticization and chemical resistance.     

Superplastic deformation and crystallization behavior of Cu54Ni6Zr22Ti18 metallic-glass sheet

Superplastic deformation and crystallization behavior of a Cu₅₄Ni₆Zr₂₂Ti₁₈ metallic glass were investigated. A maximum elongation of 650% was obtained at 733 K at 1 × 10⁻² s⁻¹ from the sheet fabricated by squeeze copper-mold casting method. At low strain rates, the strain-rate-sensitivity exponent value was close to 1, suggesting that Newtonian-like behavior governed the plastic flow. At a high strain rate around 10⁻² s⁻¹, a transition from Newtonian to non-Newtonian behavior took place with decrease in m value. Large strain hardening by crystallization occurred during the course of deformation. The strain hardening was found to be caused by crystallization according to the analyses of the relation of true stress vs. testing time, T-T-T diagram and DSC characteristics. The time periods up to the strain before strain hardening at 733 K for the Cu₅₄Ni₆Zr₂₂Ti₁₈ metallic glass were similar to that of the Zr₆₅Al₁₀Ni₁₀Cu₁₅ metallic glass at 696 K as 180–300 s (3–5 min). This coincidence could be explained by comparison of their T-T-T diagrams showing that the incubation times for crystallization of the Cu BMG at 733 K and for Zr BMG at 696 K are similar.     

Densification and compressive strength ofin-situ processed Ti/TiB composites by powder metallurgy

In the present study, the densification of Ti/TiB composites, the growth behavior ofin-situ formed TiB reinforcement, the effects of processing variables — such as reactant powder (TiB₂, B₄C), sintering temperature and time — on the microstructures and the mechanical properties ofin-situ processed Ti/TiB composites have been investigated. Mixtures of TiB₂ or B₄C powder with pure titanium powder were compacted and presintered at 700°C for 1 hr followed by sintering at 900, 1000, 1100, 1200, and 1300°C, respectively, for 3hrs. Some specimens were sintered at 1000°C for various times in order to study the formation behavior of TiB reinforcementin-situ formed within the pure Ti matrix. TiB reinforcements were formed through different mechanisms, such as the formation of fine TiB and the formation of coarse TiB by Ostwald ripening or the coalescence of fine TiB. There was no crystallographic relationship between TiB reinforcement and the matrix. There were voids at the interface between the TiB reinforcement and the Ti matrix due to the preferential growth of coarse TiB without a particular crystallographic relationship with pure Ti matrix and the surface energy between the Ti matrix and TiB reinforcements. Therefore, the densification of Ti/TiB₂ compacts was hindered by the preferential growth of coarse TiB reinforcements. The mechanical properties ofin-situ processed composites were evaluated by measuring the compressive yield strength at ambient and high temperatures. The compressive yield strength of thein situ processed composites was higher than that of the Ti-6A1-4V alloy. It was also found that the compressive yield strength of the composite made from TiB₂ reactant powder was higher than that of the composite made from B₄C at the same volume fraction of reinforcement. A crack path examination suggested that the bonding nature of interface between matrix and reinforcement made from TiB₂ reactant powder was better than that made from B₄C.     

Measurement of self-diffusion coefficients in Li ionic conductors by using the short-lived radiotracer of 8Li

For the effective use of short-lived radioactive beams, soon to be available at the Tokai Radioactive Ion Accelerator Complex, the authors have developed a radiotracer method for diffusion studies in solids. The experimental test was performed by the measurement of the diffusion coefficients of Li in a sample of the compound βLiAl using an α-emitting radiotracer of ⁸Li (T_1/2=0.84 s). It was found that the time-dependent yields of the α particles from the diffusing ⁸Li that was initially implanted in the sample could be used as a measure of the diffusivity of the tracer in a nondestructive way. The method was applied to measure the self-diffusion coefficients of Li in βLiGa, and for investigating how the Li diffusion in the Li ionic conductors is affected by the concentration of atomic defects (i.e., the existence of the atomic vacancies of Li and the defects in Ga sites that are replaced by Li).     

Quantum teleportation between a single-rail single-photon qubit and a coherent-state qubit using hybrid entanglement under decoherence effects

We study quantum teleportation between two different types of optical qubits using hybrid entanglement as a quantum channel under decoherence effects. One type of qubit employs the vacuum and single-photon states for the basis, called a single-rail single-photon qubit, and the other utilizes coherent states of opposite phases. We find that teleportation from a single-rail single-photon qubit to a coherent-state qubit is better than the opposite direction in terms of fidelity and success probability. We compare our results with those using a different type of hybrid entanglement between a polarized single-photon qubit and a coherent state.     

Formation stabilization and resizing based on the control of inter‐agent distances

We propose a control strategy that could steer the group of mobile agents in the plane to achieve a specified formation. The control law could be implemented in a fully decentralized manner so that each agent moves on their own local reference frame. Under the acyclic minimally persistent graph topology, each agent measures the relative displacements of neighboring agents and then adjusts the distances between them to achieve the desired formation. As well as achieving a fixed formation, we could resize the formation only by changing the leader edge, which connects the leader with the first‐follower in acyclic minimally persistent graph, without changing the structures of the control law. Copyright © 2014 John Wiley & Sons, Ltd.     

Exploring the Relationship Between Green Consumption Value,Satisfaction, and Loyalty to Hybrid Car in Elderly Consumers

The study aimed to examine the relationship between green consumption value, satisfaction, and loyalty of driving hybrid cars among elderly consumers. Data were collected from a cross‐sectional survey of 314 elderly consumers who purchased hybrid cars in the United States. A partial least squares analysis revealed that elderly consumers’ social, price, and quality values positively influenced the satisfaction of their hybrid car experience, and their satisfaction significantly influenced their loyalty of hybrid car. The relationship between green consumption value, satisfaction, and loyalty toward driving hybrid cars among elderly consumers revealed insight into their value orientations toward the hybrid car. Special efforts are suggested in promoting hybrid car use to elderly consumer groups. Marketers should pay attention to changing beliefs and increasing perceived values of driving a hybrid car for consumers to encourage them to use green products.     

P2P-based u-health cluster service model for silver generation in PBR platform

As the number of the silver generation increases, u-health service has evolved into more preventive services accessible in any type of service environment based on service platforms from the previous treatment and management-oriented services for specific diseases. U-health service used to solely provide remote diagnosis and counseling or biometrics monitoring, facing limitations in preventing or managing potential chronic disease cases. In this recognition, the research seeks to propose a P2P-based u-health cluster service model for silver generation in PBR(Personal Bio Record) platform. The proposed u-health service herein utilizes PCs and smart phones to provide health, dietary and exercise information regardless of time and space. Based on the PBR platform, the system effectively connects the EMR system and users’ service systems in order to understand service targets’ lifestyle patterns and offer further customized services. This u-health cluster service model is expected to realize useful services to user in a multi-platform environment and contribute to enhanced health status of senior patients with chronic disease.