Mechanical property degradation of high crystalline SiC fiber–reinforced SiC matrix composite neutron irradiated to ∼100 displacements per atom

For the development of silicon carbide (SiC) materials for next-generation nuclear structural applications, degradation of material properties under intense neutron irradiation is a critical feasibility issue. This study evaluated the mechanical properties and microstructure of a chemical vapor infiltrated SiC matrix composite, reinforced with a multi-layer SiC/pyrolytic carbon–coated Hi-Nicalon^TM Type S SiC fiber, following neutron irradiation at 319 and 629?°C to ～100 displacements per atom. Both the proportional limit stress and ultimate flexural strength were significantly degraded as a result of irradiation at both temperatures. After irradiation at 319?°C, the quasi-ductile fracture behavior of the nonirradiated composite became brittle, a result that was explained by a loss of functionality of the fiber/matrix interface associated with the disappearance of the interphase due to irradiation. The specimens irradiated at 629?°C showed increased apparent failure strain because the fiber/matrix interphase was weakened by irradiation-induced partial debonding.     

High-dose,intermediate-temperature neutron irradiation effects on silicon carbide composites with varied fiber/matrix interfaces

SiC/SiC composites are promising structural candidate materials for various nuclear applications over the wide temperature range of 300–1000 °C. Accordingly, irradiation tolerance over this wide temperature range needs to be understood to ensure the performance of these composites. In this study, neutron irradiation effects on dimensional stability and mechanical properties to high doses (11–44 dpa) at intermediate irradiation temperatures (?600 °C) were evaluated for Hi-Nicalon Type-S or Tyranno-SA3 fiber–reinforced SiC matrix composites produced by chemical vapor infiltration. The influence of various fiber/matrix interfaces, such as a 50–120 nm thick pyrolytic carbon (PyC) monolayer interphase and 70–130 nm thick PyC with a subsequent PyC (?20 nm)/SiC (?100 nm) multilayer, was evaluated and compared with the previous results for a thin-layer PyC (?20 nm)/SiC (?100 nm) multilayer interphase. Four-point flexural tests were conducted to evaluate post-irradiation strength, and SEM and TEM were used to investigate microstructure. Regardless of the fiber type, monolayer composites showed considerable reduction of flexural properties after irradiation to 11–12 dpa at 450–500 °C; and neither type showed the deterioration identified at the same dose level at higher temperatures (>750 °C) in a previous study. After further irradiation to 44 dpa at 590–640 °C, the degradation was enhanced compared with conventional multilayer composites with a PyC thickness of ?20 nm. Multilayer composites have shown comparatively good strength retention for irradiation to ?40 dpa, with moderate mechanical property degradation beginning at 70–100 dpa. Irradiation-induced debonding at the F/M interface was found to be the major cause of deterioration of various composites.     

ADAPTIVE LEARNING CONTROL OF CUTTING PARAMETERS FOR SCULPTURED SURFACE CUTTING BASED ON GENETIC ALGORITHMS AND NEURAL NETWORK

An adaptive learning control scheme intended to the on-line optimization of sculptured surface cutting process is presented. The scheme uses a back-propagation neural network to learn the relationships between process inputs and process states. The cutting parameters of the process model are optimized through a genetic algorithms(GA). The capacity of the proposed scheme for determining optimum process inputs under a variety of process conditions and optimization strategies is evaluated on the basis of milling of a sculptured surface using a ball-end mill. The experimental results show that the neural network could model the cutting process efficiently, and the cutting conditions such as spindle speed could be regulated for achieving high efficiency and high quality. Therefore the proposed approach can be well applied to the manufacturing of dies and molds.     

Graded‐index plastic optical fiber with high mechanical properties enabling easy network installations. I

A doped poly(methyl methacrylate) (PMMA)–based graded‐index plastic optical fiber (GI POF) with high mechanical strength is reported for the first time. Although the POF is generally believed to have a good mechanical flexibility even if it has a large‐core diameter, such a high mechanical strength has been provided by making the polymer chains in the POF highly oriented in its axial direction. If such an orientation of polymer chains is eliminated, the POF becomes brittle, which is similar to silica‐based fibers. On the other hand, too high an orientation of the polymer chains induces fiber deformation in a high‐temperature atmosphere resulting from orientation relaxation. This study reports how high mechanical strengths such as the tensile strength and the large elongation are provided to the GI POF. By selecting the optimum heat‐drawing conditions, the GI POF has a mechanical strength comparable to that of the commercially available step index (SI) POF. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 404–409, 2004     

Narrow multi-walled carbon nanotubes produced by chemical vapor deposition using graphene layer encapsulated catalytic metal particles

The use of graphene layer encapsulated catalytic metal particles for the growth of narrower multi-walled carbon nanotubes (MWCNTs) has been studied using plasma-enhanced chemical vapor deposition and conventional thermal CVD. Ni–C or Fe–C composite nanoclusters were fabricated using the dc arc discharge technique with metal–graphite composite electrodes carrying a current of 100–200 A in a stainless-steel chamber filled with He and CH₄ mixture gas at 27 kPa. Nano-sized grains with diameters less than 10 nm were fabricated and deposited on a Si substrate, and were used as a catalyst for MWCNT growth. Structural analyses of the composite nanoclusters and MWCNTs were carried out using transmission electron microscopy. The results show that the diameters of the MWCNTs were reduced from 50–100 nm for a conventional Ni thin film-evaporated Si substrate to a minimum of roughly 2–4 nm in the present study.     

Kinetically Stable Bicelles with Dilution Tolerance,Size Tunability,and Thermoresponsiveness for Drug Delivery Applications

Mixtures of a phospholipid (1,2‐dipalmitoyl‐sn‐glycero‐3‐phosphatidylcholine, DPPC) and a sodium‐cholate‐derived surfactant (SC‐C₅) at room temperature formed phospholipid bilayer fragments that were edge‐stabilized by SC‐C₅: so‐called “bicelles”. Because the bilayer melting point of DPPC (41 °C) is above room temperature and because SC‐C₅ has an exceptionally low critical micelle concentration (<0.5 mm ), the bicelles are kinetically frozen at room temperature. Consequently, they exist even when the mixture is diluted to a concentration of 0.04 wt %. In addition, the lateral size of the bicelles can be fine‐tuned by altering the molar ratio of DPPC to SC‐C₅. On heating to ≈37 °C, the bicelles transformed into micelles composed of DPPC and SC‐C₅. By taking advantage of the dilution tolerance, size tunability, and thermoresponsiveness, we demonstrated in vitro drug delivery based on use of the bicelles as carriers, which suggests their potential utility in transdermal drug delivery.     

Estimation of wood stiffness and strength properties of hybrid larch by near-infrared spectroscopy

This work was undertaken to investigate the feasibility of near-infrared (NIR) spectroscopy for estimating wood mechanical properties, i.e., modulus of elasticity (MOE) and modulus of rupture (MOR) in bending tests. Two sample sets having large and limited density variation were prepared to examine the effects of wood density on estimation of MOE and MOR by the NIR technique. Partial least squares (PLS) analysis was employed and it was found that the relationships between laboratory-measured and NIR-predicted values were good in the case of sample sets having large density variation. MOE could be estimated even when density variation in the sample set was limited. It was concluded that absorption bands due to the OH group in the semi-crystalline or crystalline regions of cellulose strongly influenced the calibrations for bending stiffness of hybrid larch. This was also suggested from the result that both alpha-cellulose content and cellulose crystallinity showed moderate positive correlation to wood stiffness.     

Production of extracellular bifidogenic growth stimulator by anaerobic and aerobic cultivations of several propionibacterial strains

Production of a bifidogenic growth stimulator (BGS) by propionic acid bacteria was investigated under anaerobic and aerobic culture conditions. To measure the concentration of extracellular BGS produced by propionic acid bacteria, we evaluated the effects of bioassay conditions using Bifidobacterium longum as a test microorganism on the formation of a growth-stimulation zone. The diameter of the growth-stimulation zone was significantly affected by both the component concentrations and the pH of a bioassay medium. The optimum component concentrations and pH of a bioassay medium were one-half of the normal values and 8.5, respectively. Using the bioassay method, we can measure the concentration of BGS produced by propionic acid bacteria ranging in concentrations from 0.1 microg/l to 1 mg/l using 1,4-dihydroxy-2-naphthoic acid (DHNA) and 2-amino-3-carboxy-1,4-naphthoquinone (ACNQ) as standards. Of six dairy propionic acid bacterial strains tested, the four strains (Propionibacterium freudenreichii ET-3, P. shermanii PZ-3, P. acidipropionici JCM 6432, and P. jensenii JCM 6433) produced BGS at a concentration range of 4-23 mg/l under the anaerobic culture conditions. Analysis of high performance liquid chromatography (HPLC) showed that more than 70% of total BGS produced in supernatant samples was DHNA and no ACNQ was produced by the strains. The effect of oxygen supply on BGS production was investigated for the four BGS-producing strains. The aerobic conditions exerted in positive effects on BGS production by only P. acidipropionici JCM 6432. The concentration of BGS obtained in the aerobic cultivation of P. acidipropionici JCM 6432 was 1.3-fold than that in anaerobic cultivation. Different properties (BGS production as well as cell growth and glucose metabolism) occurring in response to the aerobic conditions were observed, depending on the propionic acid bacterial strain used. This paper is the first report on BGS production by propionibacterial strains except for P. freudenreichii.