Study of crater formation and sputtering process with large gas cluster impact by molecular dynamics simulations

Molecular dynamics (MD) simulations of large argon clusters impacting on silicon solid targets were performed in order to study the transient process of crater formation and sputtering. The MD simulations demonstrate that the initial momentum of incident cluster is transferred to target surface atoms through multiple collision mechanism, where the initial momentum, which is along to the surface normal before impact, is deflected to lateral direction. This momentum transfer process was analyzed by the calculation of the velocity at the crater edge (the interface between cluster and target). In the case of Ar₁₀₀₀ cluster impact on Si(1 0 0) target at low energy per atom less than 40 eV/atom, the maximum value of lateral velocity of the crater edge increases in proportional to the velocity of incident cluster atoms. On the other hand, the crater edge velocity saturates over 40 eV/atom of incident energy per atom. In this case, the whole of constituent cluster atoms are implanted into the target and expand in both lateral and reflective directions at the subsurface region of the target. These MD simulations demonstrated that this collisional process result in the high yield sputtering of the target atoms.     

Reaction joining of SiC ceramics using TiB2-based composites

SiC ceramics were reaction joined in the temperature range of 1450–1800 °C using TiB₂-based composites starting from four types of joining materials, namely Ti–BN, Ti–B₄C, Ti–BN–Al and Ti–B₄C–Si. XRD analysis and microstructure examination were carried out on SiC joints. It is found that the former two joining materials do not yield good bond for SiC ceramics at temperatures up to 1600 °C. However, Ti–BN–Al system results in the connection of SiC substrates at 1450 °C by the formation of TiB₂–AlN composite. Furthermore, nearly dense SiC joints with crack-free interface have been produced from Ti–BN–Al and Ti–B₄C–Si systems at 1800 °C, i.e. joints TBNA80 and TBCS80, whose average bending strengths are measured to be 65 MPa and 142 MPa, respectively. The joining mechanisms involved are also discussed.     

Space charge field effect on light emitting from tetracene field-effect transistor under AC electric field

By applying square wave AC voltage to the Au source electrode of tetracene based field-effect transistor (FET), electroluminescence (EL) was obtained. The results suggest that electrons and holes were injected alternately from the source electrode and recombined each other, and lead to the EL. This type of EL was localized at the interface between the source electrode and tetracene, and enhanced periodically with two relaxation times in accordance with the applied AC voltage cycle. We modeled the carrier behavior in the FET and explained the decay of EL, taking into account the space charge field contribution. Finally, using an AC voltage superposed on DC bias voltage, it was shown that electron injection was prompted only by space charge field.     

Highwall Stability due to Punch Mining at Opencut Coal Mines

Conventional highwall mining extracts coal with an auger machine or a continuous miner from exposed seams at the base of opencut or strip operations. However, under poor strata and high stress conditions, highwall mining cannot be conducted due to pillar and roof failures. In such cases, punch highwall mining is more effective than the conventional highwall mining. This paper describes conventional highwall mining and punch highwall mining systems and discusses the stability of the highwall due to punch highwall mining at opencut coal mines.     

Lipid components,fatty acid distributions of triacylglycerols and phospholipids in rice brans

Endogenous tocochromanols in extracted lipids from rice brans of the five cultivars were determined by high-performance liquid chromatography, and were investigated in relation to the fatty acid (FA) distribution of triacylglycerols (TAG) and phospholipids (PL). The dominant tocols were α-tocopherol and γ-tocotrienol, followed by α-tocotrienol and with much smaller amounts of γ-tocopherol and δ-tocotrienol. The lipids of these rice brans comprised mainly TAG (80.6–86.0 wt.%), free FA (4.2–9.0 wt.%), and phospholipids (5.5–6.7 wt.%), whilst other components were also detected in minor proportions (0.2–2.1 wt.%). The PL components included phosphatidyl choline (31.8–46.8 wt.%), phosphatidyl ethanolamine (25.0–38.9 wt.%) and phosphatidyl inositol (20.2–23.2 wt.%). Comparison of these different cultivars showed, with a few exceptions, no significant differences (P > 0.05) in FA distribution. FA distribution of TAG among the five cultivars was evident in the rice brans: unsaturated FA were predominantly concentrated at the sn-2 position and saturated FA primarily occupying the sn-1 or sn-3 position. These results suggest that the tocopherol content, lipid component, and FA distribution in rice brans are not dependent on the cultivation areas during the growing season.     

Proposal of Design Criteria for Gas Entrainment from Vortex Dimples Based on a Computational Fluid Dynamics Method

Design criteria for gas entrainments (GE) from the liquid surface in a fast breeder reactor system were proposed in this paper for the two types of GE phenomena from a vortex dimple based on a computational fluid dynamics (CFD) method. The first gas entrainment phenomenon is a gas core extension directly to the outlet piping level, which induces large amount of GE to the flow system. The second is continuous bubble detachments from the tip of the vortex dimple. Based on CFD calculations for elemental experiments of the surface vortex, local CFD non-dimensional numbers were defined as the design criteria to prevent GE. In conclusion, it was found that the CFD non-dimensional numbers are useful for the design parameters of GE prevention.     

Treatment capability of an up-flow anammox column reactor using polyethylene sponge strips as biomass carrier

The feasibility of applying a polyethylene (PE) sponge as a biomass carrier in an anaerobic ammonium oxidation (anammox) reactor and its nitrogen removal performance were also investigated. Experiments were carried out in an up-flow column reactor with synthetic inorganic wastewater. Experimental results indicate that reactor containing PE sponge biomass carriers showed a high nitrogen removal capability and exhibited stable performance. In addition, the reactor with 8 strips PE sponge as biomass carrier exhibited greater adaptation capacity compared to that with 6 strips and could achieve a high TN removal rate within a very short period. The ratio of NO₂-N removal and NO₃-N production to NH₄-N removal for the reactor was 1.26:0.21. Furthermore, to investigate the bacterial composition of the mature community, 16S rRNA sequences were amplified by PCR and analyses were conducted using DNA databases. Results showed that a new kind of anammox microorganism (Kumadai-1) was the dominant species in the reactor when using PE sponge as a biomass carrier.     

Evaluation of selective plating media for the detection of heat- or freeze-injured Staphylococcus aureus

The efficacy of Baird-Parker (BP) agar, mannitol-salt-egg yolk (MSEY) agar and mannitol salt (MS) agar in detecting Staphylococcus aureus FRI-100 heated at 52 degrees C for 20 min in 100 mmol/L potassium phosphate buffer was determined. Brain heart infusion agar with 1% pyruvate (BHIP agar) supported the highest recovery of injured cells and was used as the control medium. Of the three selective media, significantly higher recovery of heat-injured cells was observed on BP agar than MSEY agar, and the poorest recovery was observed on MS agar (p < 0.05). Low recovery of unheated cells was obtained for MS compared with other media (p < 0.05). A reduction in populations occurred gradually in reagent-grade water stored for 14 days at -20 degrees C. There was no significant difference between BHIP agar and MS agar in the number of freeze-injured cells recovered from 1 to 14 days.     

Standardized evaluation of chemical compositions of LiTaO3 single crystals for SAW devices using the LFB ultrasonic material characterization system

The line-focus-beam ultrasonic material characterization (LIFB-UMC) system is applied to compare and evaluate tolerances provided independently for the Curie temperature T/sub C/ and lattice constant /spl alpha/ to evaluate commercial LiTaO/sub 3/ single crystals by measuring the Rayleigh-type leaky surface acoustic wave (LSAW) velocities V/sub LSAW/. The relationships between VLSAW, and T/sub C/ and /spl alpha/ measured by individual manufacturers were obtained experimentally using 42/spl deg/YX-LiTaO/sub 3/ wafers as specimens from three crystal manufacturers. In addition, the relationship between VLSAW and SH-type SAW velocities V/sub SAW/ that are actually used for the SAW device wafers was obtained through calculations, using the chemical composition dependences of the acoustical physical constants for LiTaO/sub 3/ crystals reported previously. The result of a comparison between the T/sub C/ tolerance of /spl plusmn/3/spl deg/C and the /spl alpha/ tolerance of /spl plusmn/0.00002 nm through the common scale of VLSAW or VSAW demonstrated that the /spl alpha/ tolerance is 1.6 times larger than the T/sub C/ tolerance. Furthermore, we performed a standardized comparison of statistical data of T/sub C/ and /spl alpha/ for LiTaO/sub 3/ crystals grown by two manufacturers during 1999 and 2000, using VLSAW. The results clarified the differences of the average chemical compositions and of the chemical composition distributions among the crystal ingots between the two manufacturers. A guideline for the standardized evaluation procedure has been established for the SAW-device wafer specifications by the LFB-UMC system.     

Two-color photorefractive effect in Mg-doped lithium niobate

The two-color photorefractive response of near stoichiometric lithium niobate (SLN) doped with Mg above a critical threshold has been investigated. Striking differences as compared with non Mg-doped material were observed: The intermediate level in the two-color writing process has approximately a two orders of magnitude longer lifetime in SLN:Mg than in nominally undoped SLN, the grating is written in a shallower level but can be fixed via a simple thermal process and complementary electron-hole gratings are formed. It is proposed that the Fe impurity level moves from below the small-polaron level in nonMgO-doped material to above it, resulting in the increased lifetime of the small polaron. These changes are associated with a shift of the Fe from a Li site to a Nb site. The two-color sensitivity is higher than in the absence of MgO but the dynamic range is much lower.