Sieving of aerosol particles with metal screens

Metal screens with uniform micrometer-sized opening were employed to sieve aerosol particles by suppressing the adhesion of particles smaller than the openings. The collection efficiencies of monodispersed polystyrene latex (PSL) particles were experimentally determined using the metal screens with 1.2, 1.8, 2.5, and 4.2 μm openings at various filtration velocities. The particles smaller than the mesh opening adhered on the metal screen at a low filtration velocity, but the bounce-off of particles on the mesh surface suppressed the adhesion at a high velocity. As a result, we found that the adhesion of PSL particles larger than 0.3 μm mostly suppressed at a filtration velocity higher than 10 m s^?1 and therefore we can sieve aerosol particles according to the opening size of metal screens. We also found that the particle number concentration could be determined by measuring the increase in pressure drop since the clogging of metal screen openings takes place by the individual particles.

© 2016 American Association for Aerosol Research     

Wettability of a microgrid‐structured polymer film with microfabrication utilizing the stick–slip phenomenon

A microgrid structure was formed on the surface of a polyethylene terephthalate (PET) film with an original microfabrication method (termed SS processing) utilizing the stick–slip (SS) phenomenon, and the effect of this surface structure on wettability was evaluated. Microgrid‐structured films could be fabricated by two‐axis SS processing. Moreover, an arbitrary parallelogram microgrid structure could be formed by selecting the direction of the second SS processing with respect to that of the first SS processing. Both water contact angle and water sliding angle of the SS‐processed film were larger than that of the PET film. Hence, the SS‐processed film showed a petal‐like effect. Furthermore, the water sliding angle of the microgrid‐structured film showed anisotropy due to the pinning effect derived from the microgrid structure. As a result, it is revealed that a hydrophobic PET film with a petal‐like effect and anisotropic wettability can be fabricated by SS processing. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45140.     

Time-resolved DXAFS study on the reduction processes of Cu cations in ZSM-5

The time-resolved reduction process of copper cations in/on ZSM-5 during temperature-programmed reduction (300–700 K) was studied by energy-dispersive X-ray absorption fine structure (DXAFS) as well as transmission electron microscopy (TEM). Two Cu-ZSM-5 samples with different Cu loadings were prepared by an ion-exchange method. The Cu K-edge DXAFS spectra for isolated Cu₂₊ species in the channels of ZSM-5 and CuO particles on the outer surfaces of ZSM-5 were recorded at an interval of 1 s during the reduction. The curve fitting analysis of the EXAFS data and the XANES analysis revealed that the isolated Cu₂₊ species in the channels were reduced stepwise. They were reduced to isolated Cu₊ species at 400–450 K and the Cu₊ species to Cu₀ metallic clusters at 550–650 K. Small clusters like Cu₄ were initially formed, followed by particle growth. A small part of them went out to the outer surfaces of ZSM-5 during the reduction. In contrast, CuO particles on the outer surfaces were reduced directly to Cu₀ metallic particles around 450 K.     

Improvement in mechanical properties of poly(p‐phenylene sulfide) fibers by high‐tension multiannealing method

High‐tension multiannealing (HTMA) was applied to improve the tensile properties of poly(p‐phenylene sulfide) fibers, which was furthermore applied to the fibers produced and improved with the zone‐drawing and zone‐annealing treatments. The HTMA treatment was repeatedly applied to the fibers under the conditions of a 250°C temperature and an applied tension of between 201.0 and 188.0 MPa. As a result, at the 13th treatment the degree of crystallinity increased to 40%. On the other hand, the orientation factor of crystallites increased dramatically to 0.982 during the zone‐drawing treatment, but increased only slightly during the subsequent treatments of zone annealing and HTMA. The finally obtained fiber had a tensile modulus of 10.4 GPa and a tensile strength of 0.73 GPa. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 1569–1576, 2000     

Molecular aggregation of PEEK with PES blends and the block copolymers composed of PEEK and PES components

Polymer blends of PEEK with PES were prepared by the solution blending method. Copolymers composed of PEEK and PES components were synthesized from these oligomers. The formation conditions exerted an influence over the molecular aggregation and the crystallization behaviors of the blend films and block copolymers which were examined by X-ray diffractometry and DSC analysis. As a result, phase-separation in the blend films was found when the formation temperature was high. The blend films formed at 340°C, quenched and annealed at 180°C, exhibited the same crystallization behavior as those of PEEK. In the case of the blend films formed at 300°C, the annealing of the films at 250°C was required to crystallize the blend films. The T_g of a copolymer with a PEEK component content of more than 50% tends to shift toward a higher temperature than the T_g of PEEK itself, and the T_m of the copolymer toward a lower temperature than that of PEEK ist.     

The selective thermal cis-trans isomerization of 1,2-diphenylsulfonyl ethylene in the presence of carbon dioxide

The selective isomerization of cis-1,2-diphenylsulfonyl ethylene to trans-1,2-diphenylsulfonyl ethylene proceeded in supercritical carbon dioxide above 393 K without an addition of catalyst. The product yield increased with increasing temperature and was almost constant against carbon dioxide density. The 73% of product yield was obtained at 493 K and 10 MPa of carbon dioxide pressure for 60 min. The product yield obtained in supercritical carbon dioxide was larger than those obtained in organic solvents. The supercritical carbon dioxide was a dilute solvent compared with organic solvent, which probably reduced the suppression of the reaction by dense solvent. Further, only cis-sulfonyl ethylenes isomerized among several cis-ethylene derivatives. The sulfonyl group played an important role for the isomerization.     

Hydrolysis of Cellulose Selectively into Glucose Over Sulfonated Activated-Carbon Catalyst Under Hydrothermal Conditions

A sulfonated activated-carbon (AC-SO₃H) catalyst selectively hydrolyzes cellulose with β-1,4-glycosidic bonds into glucose in the catalytic hydrothermal reactions at temperatures around 423 K. The AC-SO₃H catalyst with the hydrothermal pre-treatment has the excellent catalytic properties attributed to the high hydrothermal stability and the strong acid sites of sulfo functional groups.     

Characterization of highly dispersed Ni/Al2O3 catalysts by EXAFS analysis of higher shells

The size and morphology of Ni/Al₂O₃ catalysts in the oxidic, reduced, and passivated state were determined by EXAFS analysis of the higher shells around the Ni atoms. In the oxidic state, the Ni cations were present in small NiO_x particles with predominant (111) plane. Below 4.5 wt% Ni loading, the NiO_x particles consisted of one Ni layer, and of two or three Ni layers above 4.5 wt% Ni. A Ni–Al contribution was observed in samples with low Ni loading. The layer which is in contact with the Al₂O₃ surface is affected by the support surface and its structure is highly distorted, while the other layers were not distorted and have a structure similar to that in bulk NiO. In the reduced state, the number of Ni metal atoms in the reduced Ni particles was smaller than 100 with a narrow distribution below a loading of 15.6 wt% Ni. Above this loading, the particle size suddenly increased and the distribution became wider. The distances and Debye–Waller factors were similar to those of bulk nickel which suggested a weak interaction between the particles and the support. In the passivated state, Ni kernels with 20–40 metal atoms were covered by a one layer thick NiO skin. This revised version was published online in June 2006 with corrections to the Cover Date.     

The Versatile Manipulations of Self-Assembled Proteins in Vaccine Design

Protein assemblies provide unique structural features which make them useful as carrier molecules in biomedical and chemical science. Protein assemblies can accommodate a variety of organic, inorganic and biological molecules such as small proteins and peptides and have been used in development of subunit vaccines via display parts of viral pathogens or antigens. Such subunit vaccines are much safer than traditional vaccines based on inactivated pathogens which are more likely to produce side-effects. Therefore, to tackle a pandemic and rapidly produce safer and more effective subunit vaccines based on protein assemblies, it is necessary to understand the basic structural features which drive protein self-assembly and functionalization of portions of pathogens. This review highlights recent developments and future perspectives in production of non-viral protein assemblies with essential structural features of subunit vaccines.