Vapor-phase kinetics and its contribution to global three-phase reaction rate in hydrogenation of 1-methylnaphthalene

It has been considered that the contribution of the vapor-phase reaction (VPR) to the global three-phase reaction rate may become much lower as the catalyst effectiveness factor approaches unity. In this study, the hydrogenation of 1-methylnaphthalene was performed as an example of slow reactions using a laboratory-scale trickle-bed reactor (TBR) at 583 K, 8.0 MPa. It was qualitatively confirmed that VPR contributed to the product yields in TBR even in this slow reaction system when the liquid velocity was low and the volatility of the liquid was high. Langmuir–Hinshelwood type kinetic equations were established for the vapor-phase reaction. The product yields in TBR neither be explained by liquid- vapor-phase kinetics without external effects, nor the conventional partial wetting model. Therefore, a partial wetting model considering the contribution of VPR was proposed where the catalyst bed composed of externally partial and internally complete wet particles, and completely dry particles was assumed. Using this model, the product yields in TBR were suitably explained.     

Fracture Strength and Microstructure of β-SiAlON with Hafnia Addition

The influence of HfO₂ addition on the fracture strength and microstructure of ß-SiAlON ceramics sintered from Si₃N₄ and Al₂O₃ powders was investigated. The strength was increased by the addition of HfO₂, from ∼500 MPa to 700 MPa, and was almost constant from ambient temperature to 1300°C. Monoclinic HfO₂ grains that were distributed in the SiAlON grain boundaries had a flat shape (∼20 nm thick) and were surrounded by an amorphous phase. The aluminum concentration in ß-SiAlON in the samples with an Al₂O₃ starting composition of 15 wt% was decreased by the addition of HfO₂. The amount of secondary phases was very small at grain boundaries between the SiAlON grains; amorphous phases were observed infrequently at the triple points but were very small (∼20 nm). The effects of HfO₂ addition on the mechanism of the microstructure development and fracture strength are discussed.     

Applications of hydrothermal electrolysis for conversion of 1-butanol in wastewater treatment

Hydrothermal electrolysis of organic compound in the presence of electrolyte was conducted for a woody biomass model compound. The reaction behavior of 1-butanol as a woody biomass model compound was studied in subcritical conditions at 200-250 °C and 8-12 MPa with a batch autoclave. The autoclave volume was 500 mL and equipped system with agitation stirrer, electric current control, electric heating and temperature control and a pressure gauge. The chemical species in aqueous products were identified by gas chromatography mass spectrometry (GC-MS) and quantified using gas chromatography flame ionization detector (GC-FID). The gaseous products were analyzed by gas chromatography with a thermal conductivity detector (GC-TCD). The effects of reaction temperature, pressure and applied constant current on the conversion process of 1-butanol were presented. The main products from the conversion of 1-butanol were butanal, butyric acid, hydrogen and carbon dioxide. Additionally, the values of reaction rate constant for butanal and butyric acid formation were calculated at 200 and 250 °C by kinetic study.     

Fine TiC dispersed Al2O3 composites fabricated via in situ reaction synthesis and conventional process

To further improve the mechanical performance and reduce the percolation threshold by controlling microstructures, Al₂O₃-TiC composites containing 0-20 vol% TiC were fabricated via in situ reaction synthesis. Graphite (ATC) and carbon nanotubes (ATCT) were used as carbon sources. The composites were also fabricated via a conventional process using a TiC starting powder (AT). X-ray diffraction analysis and scanning electron microscopy observation results indicated successful fabrication of the composites with various microstructures. TiC particles in ATCT were completely dispersed at grain boundaries, whereas in ATC and AT, these particles were either intragranular or intergranular dispersed. The composites could be listed as follows, ATCT > ATC > AT, that is, in descending order of the reinforcing flexural strength and fracture toughness. The nanoindentation measurement indicated the optimum hardening effect of ATCT. The ATCT composite also exhibited the highest fracture toughness, which was 49% higher than that of the monolithic Al₂O₃. Crack deflection was considered as the main toughening mechanism while crack bridging behavior also occurred in ATCT. For a given TiC content, ATCT exhibited the lowest electrical resistivity, owing mainly to the complete grain-boundary dispersion of the relatively large TiC particles. The similarity of the Al₂O₃ grain size and TiC particle size of ATCT contributed to the lowest percolation threshold achieved (11.2%), which (to date) is the lowest value that has been reported for the Al₂O₃-TiC system.     

Relation between crystal structure and lattice oxygen content of sintered reaction-bonded silicon nitride

When reaction-bonded silicon nitride containing MgO/Y₂O₃ additives is sintered at three different temperatures to form sintered reaction-bonded silicon nitride (SRBSN), the thermal conductivity increases with sintering temperature. The β-Si₃N₄ (silicon nitride) crystals of SRBSN ceramics were synthesized and characterized to investigate the relation between the crystal structure and the lattice oxygen content. The hot-gas extraction measurement result and the crystal structure obtained using Rietveld analysis suggested that the unit cell size of the β-Si₃N₄ crystal increases with the decrease in the lattice oxygen content. This result is reasonable considering that the lattice oxygen with the smaller covalent radius substitutes nitrogen with the larger one in the β-Si₃N₄ crystals. The lattice oxygen content decreased with increasing sintering temperature which also correlated with increase in thermal conductivity. Moreover, it is noteworthy from the viewpoint that it may be possible to apply the lattice constant analysis for the nondestructive and simple measurement of the lattice oxygen content that deteriorates the thermal conductivity of the β-Si₃N₄ ceramics.     

Current Understanding of the Structure,Stability and Dynamic Properties of Amyloid Fibrils

Amyloid fibrils are supramolecular protein assemblies represented by a cross-β structure and fibrous morphology, whose structural architecture has been previously investigated. While amyloid fibrils are basically a main-chain-dominated structure consisting of a backbone of hydrogen bonds, side-chain interactions also play an important role in determining their detailed structures and physicochemical properties. In amyloid fibrils comprising short peptide segments, a steric zipper where a pair of β-sheets with side chains interdigitate tightly is found as a fundamental motif. In amyloid fibrils comprising longer polypeptides, each polypeptide chain folds into a planar structure composed of several β-strands linked by turns or loops, and the steric zippers are formed locally to stabilize the structure. Multiple segments capable of forming steric zippers are contained within a single protein molecule in many cases, and polymorphism appears as a result of the diverse regions and counterparts of the steric zippers. Furthermore, the β-solenoid structure, where the polypeptide chain folds in a solenoid shape with side chains packed inside, is recognized as another important amyloid motif. While side-chain interactions are primarily achieved by non-polar residues in disease-related amyloid fibrils, the participation of hydrophilic and charged residues is prominent in functional amyloids, which often leads to spatiotemporally controlled fibrillation, high reversibility, and the formation of labile amyloids with kinked backbone topology. Achieving precise control of the side-chain interactions within amyloid structures will open up a new horizon for designing useful amyloid-based nanomaterials.     

Enhancement of Anti-Tumoral Immunity by β-Casomorphin-7 Inhibits Cancer Development and Metastasis of Colorectal Cancer

β-Casomorphin-7 (BCM) is a degradation product of β-casein, a milk component, and has been suggested to affect the immune system. However, its effect on mucosal immunity, especially anti-tumor immunity, in cancer-bearing individuals is not clear. We investigated the effects of BCM on lymphocytes using an in vitro system comprising mouse splenocytes, a mouse colorectal carcinogenesis model, and a mouse orthotopic colorectal cancer model. Treatment of mouse splenocytes with BCM in vitro reduced numbers of cluster of differentiation (CD) 20⁺ B cells, CD4⁺ T cells, and regulatory T cells (Tregs), and increased CD8⁺ T cells. Administration of BCM and the CD10 inhibitor thiorphan (TOP) to mice resulted in similar alterations in the lymphocyte subsets in the spleen and intestinal mucosa. BCM was degraded in a concentration- and time-dependent manner by the neutral endopeptidase CD10, and the formed BCM degradation product did not affect the lymphocyte counts. Furthermore, degradation was completely suppressed by TOP. In the azoxymethane mouse colorectal carcinogenesis model, the incidence of aberrant crypt foci, adenoma, and adenocarcinoma was reduced by co-treatment with BCM and TOP. Furthermore, when CT26 mouse colon cancer cells were inoculated into the cecum of syngeneic BALB/c mice and concurrently treated with BCM and TOP, infiltration of CD8⁺ T cells was promoted, and tumor growth and liver metastasis were suppressed. These results suggest that by suppressing the BCM degradation system, the anti-tumor effect of BCM is enhanced and it can suppress the development and progression of colorectal cancer.     

The Role of HECT-Type E3 Ligase in the Development of Cardiac Disease

Despite advances in medicine, cardiac disease remains an increasing health problem associated with a high mortality rate. Maladaptive cardiac remodeling, such as cardiac hypertrophy and fibrosis, is a risk factor for heart failure; therefore, it is critical to identify new therapeutic targets. Failing heart is reported to be associated with hyper-ubiquitylation and impairment of the ubiquitin–proteasome system, indicating an importance of ubiquitylation in the development of cardiac disease. Ubiquitylation is a post-translational modification that plays a pivotal role in protein function and degradation. In 1995, homologous to E6AP C-terminus (HECT) type E3 ligases were discovered. E3 ligases are key enzymes in ubiquitylation and are classified into three families: really interesting new genes (RING), HECT, and RING-between-RINGs (RBRs). Moreover, 28 HECT-type E3 ligases have been identified in human beings. It is well conserved in evolution and is characterized by the direct attachment of ubiquitin to substrates. HECT-type E3 ligase is reported to be involved in a wide range of human diseases and health. The role of HECT-type E3 ligases in the development of cardiac diseases has been uncovered in the last decade. There are only a few review articles summarizing recent advancements regarding HECT-type E3 ligase in the field of cardiac disease. This study focused on cardiac remodeling and described the role of HECT-type E3 ligases in the development of cardiac disease. Moreover, this study revealed that the current knowledge could be exploited for the development of new clinical therapies.     

Identification of Tumor Suppressive Genes Regulated by miR-31-5p and miR-31-3p in Head and Neck Squamous Cell Carcinoma

We identified the microRNA (miRNA) expression signature of head and neck squamous cell carcinoma (HNSCC) tissues by RNA sequencing, in which 168 miRNAs were significantly upregulated, including both strands of the miR-31 duplex (miR-31-5p and miR-31-3p). The aims of this study were to identify networks of tumor suppressor genes regulated by miR-31-5p and miR-31-3p in HNSCC cells. Our functional assays showed that inhibition of miR-31-5p and miR-31-3p attenuated cancer cell malignant phenotypes (cell proliferation, migration, and invasion), suggesting that they had oncogenic potential in HNSCC cells. Our in silico analysis revealed 146 genes regulated by miR-31 in HNSCC cells. Among these targets, the low expression of seven genes (miR-31-5p targets: CACNB2 and IL34; miR-31-3p targets: CGNL1, CNTN3, GAS7, HOPX, and PBX1) was closely associated with poor prognosis in HNSCC. According to multivariate Cox regression analyses, the expression levels of five of those genes (CACNB2: p = 0.0189; IL34: p = 0.0425; CGNL1: p = 0.0014; CNTN3: p = 0.0304; and GAS7: p = 0.0412) were independent prognostic factors in patients with HNSCC. Our miRNA signature and miRNA-based approach will provide new insights into the molecular pathogenesis of HNSCC.     

Excess estrogen sulfoconjugation as the possible cause for a poor sign of parturition in pregnant cows carrying somatic cell clone fetuses

We conducted this study to elucidate a factor causing a poor sign of parturition and prolonged gestation, which is frequently observed in cows carrying somatic clone fetuses. Pre-partum rises in concentrations of plasma estrone and estradiol-17beta in the recipient cows pregnant with clones were subtle. By contrast, the plasma concentration of estrone sulfate in clone pregnancies increased gradually from pre-initiation of parturition induction whereas control cows that received in vivo-derived embryos showed a significant increase at parturition. Therefore, in clone pregnancies, the ratio of estrone/estrone sulfate was low during the pre-partum period compared with control. Messenger RNA expression of estrogen sulfotransferase (SULT1E1) in the placenta at parturition was significantly higher in clone pregnancies than control pregnancies and was localized in binucleate cells (BNC). SULT1E1 mRNA abundance was negatively and positively correlated with concentrations of maternal estrone and estrone sulfate at parturition respectively. Messenger RNA expressions of estrogen sulfatase (STS) and aromatase (CYP19) were similar between clone and control pregnancies and were localized in BNC and caruncular epithelial cells. STS and CYP19 mRNA abundances showed positive correlations with maternal estradiol-17beta concentration. The population of BNC in the placenta did not differ between clone and control pregnancies. Plasma cortisol concentration of vaginally delivered newborn clone calves was comparable with those of control, although cesarean section delivered clone calves showed a low concentration. These results suggest that excess estrogen sulfoconjugation is the reason for the perturbed low ratio of active to inactive estrogens and the resulting hormonal imbalance contributes to the lack of overt signs of readiness for parturition in cows pregnant with clones.