Fine TiC dispersed Al2O3 composites fabricated via in situ reaction synthesis and conventional process

To further improve the mechanical performance and reduce the percolation threshold by controlling microstructures, Al₂O₃-TiC composites containing 0-20 vol% TiC were fabricated via in situ reaction synthesis. Graphite (ATC) and carbon nanotubes (ATCT) were used as carbon sources. The composites were also fabricated via a conventional process using a TiC starting powder (AT). X-ray diffraction analysis and scanning electron microscopy observation results indicated successful fabrication of the composites with various microstructures. TiC particles in ATCT were completely dispersed at grain boundaries, whereas in ATC and AT, these particles were either intragranular or intergranular dispersed. The composites could be listed as follows, ATCT > ATC > AT, that is, in descending order of the reinforcing flexural strength and fracture toughness. The nanoindentation measurement indicated the optimum hardening effect of ATCT. The ATCT composite also exhibited the highest fracture toughness, which was 49% higher than that of the monolithic Al₂O₃. Crack deflection was considered as the main toughening mechanism while crack bridging behavior also occurred in ATCT. For a given TiC content, ATCT exhibited the lowest electrical resistivity, owing mainly to the complete grain-boundary dispersion of the relatively large TiC particles. The similarity of the Al₂O₃ grain size and TiC particle size of ATCT contributed to the lowest percolation threshold achieved (11.2%), which (to date) is the lowest value that has been reported for the Al₂O₃-TiC system.     

Supercritical CO2 extraction of essential oils and cuticular waxes from peppermint leaves

Essential oils and cuticular waxes were extracted from peppermint leaves with supercritical carbon dioxide in a semicontinuous-flow extractor. The effects of CO₂ flow rate and pressure on the extraction rate were studied within the flow rate range of (4·1–9·8) × 10⁻⁵ kg s⁻¹ and the pressure range of 10–30 MPa. Flow rate effect indicated that the intraparticle diffusion resistance was not dominant in this process. The extraction rate of cuticular waxes increased remarkably with the pressure, whereas that of essential oils was almost constant as compared with cuticular waxes. The concentration of cuticular waxes at the exit of the extractor was close to the solubility of triacontane while that of essential oils was much lower than the solubility of 1-menthol.     

The effect of w/c ratio and curing temperature on the permeability of hardened cement paste

The importance of concrete permeability is discussed relative to its effect on durability. Experimental studies were made of the effect of water/cement ratio and curing temperature on the porosity, pore size distribution and permeability of cement pastes. Although total porosities of samples cured at 60°C are smaller than in those cured at 27°C, the pore volume larger than 750Å radius is greater in the 60°C samples and is related to higher permeabilities also in the latter.     

Mid-infrared spectroscopic measurement of ionic dissociative materials in the metabolic pathway

We determine the pH dependency of the mid-infrared spectra in aqueous solution of the organic dissociative materials in the metabolic pathway: saccharide phosphates (G6P, F6P), adenosine, and its phosphates (ATP, ADP, AMP). The series of molar absorbance spectra for these reagents were obtained in a pH range of about 2 to 11 with a Fourier transform infrared (FT-IR) spectrometer equipped with a horizontal diamond attenuated total reflection (ATR) sampling accessory. We also provide a method of infrared spectral extraction of ionic dissociative materials by performing a linear least-square fitting utilizing the formulas of ionic dissociation equilibrium shift, and we obtain the infrared spectrum of each ionic species of the dissociative materials: G6P-, G6P2-; F6P-, F6P2-; ATP2-, ATP3-, ATP4-; ADP-, ADP2-, ADP3-; AMP, AMP-, AMP2-; and adenosine+, adenosine0. The infrared spectral structure of each ionic species of the dissociative materials in the metabolic pathway are discussed. Additionally, the possibility for a quantification system of the concentrations of the organic dissociative materials in varying pH is suggested.     

Cu-NMR study on high-T c cuprate La1.89Ca1.11Cu2O6+δ (La2126)

Cu-NMR spectra and the nuclear spin-lattice relaxation rate T ₁ ^-1 have been studied intensively on the bilayer type high-T_c cuprate La_1.89Ca_1.11Cu₂O₆₊ (La2126). The resonance line shift showed a monotonic decrease with lowering temperature in the normal state, indicating that this compound belongs to the lightly-doped region. The Curie-Weiss temperature dependence of (T₁T)^–1 in the normal state shows that the pseudo spin-gap does not always exist in the light-doped bilayer systems.     

Role of granulosa and theca cell interactions in ovarian follicular maturation

We developed a culture system in which two types of ovarian follicular cells were allowed to attach to opposite sides of a collagen membrane. Using this in vitro cell culture system, we studied the effects of granulosa- and theca-cell interaction on the morphology, structure, and function of bovine ovarian follicular cells. In the first part of the study, we explored how the interaction between theca and granulosa cells affects the morphology and structure of the cells. This study was done using follicular cells collected from bovine ovarian follicles at the early developmental stage. Granulosa cells cultured alone were flattened, and formed a monolayer sheet. By contrast, granulosa cells cultured with theca cells were convex, and formed multilayer sheets. Theca cells cultured alone were thin, flat, and spindle-shaped. Theca cells cultured with granulosa cells were also spindle-shaped; however, they appeared convex and more densely packed when compared with theca cells cultured alone. In the second part of the study, the possible role of the cellular interaction in the control of differentiation and growth of granulosa and theca cells was investigated. When follicular cells were isolated from the early stage of follicular development, theca cells reduced progesterone and inhibin production by granulosa cells and augmented the growth of granulosa cells. When the cells were isolated from the late stage of follicular development, by contrast, theca cells augmented hormonal production by granulosa cells, and did not affect the growth of granulosa cells. The growth and androstenedione production by theca cells were increased by the presence of granulosa cells, irrespective of the origin of follicular cells. These results demonstrated that communication between two types of follicular cells results in reciprocal modulation of their morphology, structure, growth, and function. Cellular interactions seem to be one of the major factors controlling the differentiation and growth of the follicular cells during the follicular maturation process. In contrast to granulosa and theca cells cultured alone, cells in the coculture seemed to possess morphological and functional characteristics more similar to those of cells in the growing follicular wall in vivo. Thus, we speculate that the interaction between these two types of follicular cells is essential for the maintenance of original structure and function of the bovine follicular wall.     

Study on chemical structures of poly (tetrafluoroethylene-co-perfluoroalkylvinylether) by soft-EB irradiation in solid and molten state

Poly (tetrafluoroethylene-co-perfluoroalkylvinylether) (PFA) was irradiated by soft electron beam (soft-EB) under nitrogen gas atmosphere in solid-state and its molten state, respectively. The changes of thermal property and chemical structures of irradiated PFA in solid-state and molten state were studied by differential scanning calorimetric analysis (DSC) and solid-state ¹⁹F magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. By DSC analysis, the melting temperature shifted to lower temperatures, and crystallinity decreased with increasing soft-EB dose. By solid-state ¹⁹F MAS NMR spectroscopy, the new signals was observed and the detected new signals in irradiated PFA at 315 °C and at 30 °C were due to the tertiary carbon group with branching site (Y-type crosslinking site), perfluoro-propylene site and chain end methylene groups, respectively.Moreover, the molar ratio of perfluoroalkylvinylether (FAVE) structure to -CF₂- units decreased with increasing dose.     

Heat-resisting TCO films for PV cells

We developed new heat-resisting transparent conductive oxide (TCO) films with resistivity of 1.4×10⁻⁴ Ω cm, an optical transmittance of above 80% (at 550 nm) and heat-resisting temperature at above 600 °C. The TCO films consists of fluorine-doped tin oxide films coated on indium–tin oxide films. They were prepared by a spray pyrolysis deposition method on glass substrates. The 100×100 mm² dye-sensitized solar cells (DSCs) were prepared with the TCO films. An energy conversion efficiency of the DSC was improved drastically in comparison to the case with conventional TCO films.