Thermomechanical behavior of Ti-Ni shape memory alloy films deposited by DC magnetron sputtering

In this study, thermomechanical properties of titanium-nickel (Ti-Ni) shape memory alloy (SMA) films are investigated in order to derive constitutive relations. Ti-Ni SMA films, deposited by DC magnetron sputtering under controlled film composition, are characterized by uniaxial tensile tests. At room temperature (R.T.), Ti-Ni films having Ti contents less than 50 at% exhibit superelastic behavior, and those having Ti contents greater than 50 at% exhibit shape memory behavior. However, the Ni—53.2 at% Ti film fractured at a tensile strain of 0.8% because of an increase in brittleness with increasing Ti content. At elevated temperatures, Ti-Ni films having Ti contents of 50.2 to 52.6 at% undergo phase change from martensite to austenite. The Young's modulus of the Ti-Ni films depends on temperature at each phase, regardless of film composition. Film composition does, however, affect the measured material constants b_A, b_M, c_A, and c_M. Stress-strain curves calculated from the constructed constitutive equation closely agree with those obtained from tensile tests, for both the martensite and austenite phases. The constitutive equations are expected to find great utility in the design of Ti-Ni film-actuated microelectromechanical systems (MEMS).     

Optical pulse compression based on stationary rescaled pulse propagation in a comblike profiled fiber

In this paper, optical pulse compression using a comblike profiled fiber (CPF) is theoretically and experimentally studied, in which highly nonlinear fibers and single-mode fibers are alternately concatenated. Stationary rescaled pulse (SRP), is the main focus, which is a recently discovered nonlinear stationary pulse in CPF. The fundamental characteristics of SRP are investigated, and SRP propagation is applied to the design of the CPF pulse compressor. Using the proposed design method, the specifications of the CPF can easily be controlled, such as the compression ratio per step of the CPF or the pedestal of the output pulse. Two experimental results of pulse compression using the CPF based on the proposed design method are shown: 1) pulse compression with a large compression ratio per step of the CPF and 2) low-pedestal and wideband wavelength-tunable compression. A parametric noise-amplification phenomenon occurring in a compression process for an optical pulse sequence is also numerically analyzed.     

气体辅助法陶瓷薄膜的制备

Ceramics （alumina） coating on sevaral materials has been successfully achieved at room temperature by gas - assisted deposition （ GAD） technique. In the GAD process the alumina powder was accelerated by jet flow with velocity of - 1000 m/s and impaeted to a substrate, thereby a fiat and dense film was deposited up to 10 μm on the substrate without arty additional heating. The crystal structttre of the alumina in an obtained GAD films seemed as amorphous like. The crystalline phase was recovered by post nnnenling at 1 300 ℃ , however, the matrix resulted in a hollow structure.     

Preparation of ferroelectric Ba(Ti/sub 0.85/Sn/sub 0.15/)O/sub 3/ thin films by metal-organic decomposition

Ferroelectric Ba(Ti/sub 0.85/Sn/sub 0.15/)O/sub 3/ (BTS/sub 15/) thin film is newly prepared on the Pt/Ti/SiO/sub 2//Si substrate by metal-organic decomposition. The firing condition is determined by thermogravimetric and differential thermal analysis. The BTS/sub 15/ thin film with a flat surface and uniform thickness is obtained by spin coating in N/sub 2/ atmosphere that avoids moisture. The BTS/sub 15/ film has a perovskite phase and a preferential [110] texture. It is also found that the crystalline structure is cubic at 24/spl deg/C with a lattice constant of 4.01 /spl Aring/, and a grain size of about 30 nm was estimated by Scherrer equation and SEM image. From P-E hysteresis loop at 20/spl deg/C, the polarization at E=0 and the electric field at P=0 are found to be 1.07 /spl mu/C/cm/sup 2/ and 24.0 kV/cm, respectively. It is observed that the dielectric constant decreases monotonously from about 830 to 630 with increasing temperature ranging from 20/spl deg/C to 50/spl deg/C. Finally, it is found that the BTS/sub 15/ thin film shows a sufficient ferroelectricity and is an attractive material for functional ferroelectric devices, such as thermal-type infrared sensors.     

Inside Front Cover: Fabrication of Ideally Ordered Nanoporous Alumina Films and Integrated Alumina Nanotubule Arrays by High‐Field Anodization (Adv. Mater. 17/2005)

A simple, low‐cost approach to fabricating large‐area highly ordered nanoporous alumina films in sulfuric acid solutions through a single‐step high‐field anodization, without the assistance of any additional process, is reported on p. 2115 by Chu and co‐workers. The critical high anodizing potential in the adopted electrolyte system increases with the ageing of solutions after a long period of anodization. Correspondingly, the applicable current density for stable anodization rises significantly, thus leading to high‐speed film growth. Uniform porous anodic alumina films in sulfuric acid solutions under a high electric field of 40–70 V and 1600–2000 A m^–2 are achieved.     

Novel screen technology for high‐contrast front‐projection display by controlling ambient‐light reflection

Abstract— One problem with front‐projection displays is that the screen contrast ratio decreases in bright ambient light. In this paper, we propose a new front‐projection display system that incorporates the control of reflection of ambient light in the screen design, providing a high contrast ratio even in a brightly lit room.     

Charge behavior in flowing oil in oil/ pressboard insulation system by electro-optic field measurement

The electrical insulation structure of most power transformers is a combination of insulating oil and solid materials. One of the crucial problems we face in transformer operation is flow electrification, which occurs at a flowing oil/solid material interface. Thus, for the transformer insulation design, we need to clarify the now electrification phenomena. In this paper, we measured the electric field strength in an oil/pressboard composite insulation system using an electro-optic method of the Kerr effect. We obtained the time variation of electric field distribution in both flowing uncharged and charged oil. It is notable that we could quantitatively clarify the electric field distortion in flowing charged oil by flow electrification. Furthermore, we measured the leakage current from divided electrodes and derived a charge density distribution along the flow direction. Finally, we quantitatively discussed the electric field distribution and the charge behavior from the measurement results.     

High-efficiency photon-number detection for quantum information processing

The visible light photon counter (VLPC) features high quantum efficiency (QE) and low pulse height dispersion. These properties make it ideal for efficient photon-number state detection. The ability to perform efficient photon-number state detection is important in many quantum information processing applications, including recent proposals for performing quantum computation with linear optical elements. In this paper, we investigate the unique capabilities of the VLPC. The efficiency of the detector and cryogenic system is measured at 543 nm wavelengths to be 85%. A picosecond pulsed laser is then used to excite the detector with pulses having average photon numbers ranging from 3-5. The output of the VLPC is used to discriminate photon numbers in a pulse. The error probability for number state discrimination is an increasing function of the number of photons, due to buildup of multiplication noise. This puts an ultimate limit on the ability of the VLPC to do number state detection. For many applications, it is sufficient to discriminate between 1 and more than one detected photon. The VLPC can do this with 99% accuracy.     

Human-like natural behavior generation based on involuntary motions for humanoid robots

Human behaviors consist of both voluntary and involuntary motions. Almost all behaviors of task-oriented robots, however, consist solely of voluntary motions. Involuntary motions are important for generating natural motions like those of humans. Thus, we propose a natural behavior generation method for humanoid robots that is a hybrid generation between voluntary and involuntary motions. The key idea of our method is to control robots with a hybrid controller that combines the functions of a communication behavior controller and body balancing controllers. We also develop a wheeled inverted pendulum type of humanoid robot, named “Robovie-III”, in order to generate involuntary motions like oscillation. By applying our method to this robot and conducting preliminary experiments, we verify its validity. Experimental results show that the robot generates both voluntary and involuntary motions.