Extremely narrow spectral linewidth and low chirping of theMQW-DFB-PPIBH laser diode

The low threshold current of 9 mA, the high side-mode suppression ratio of more than 45 dB, the extremely narrow spectral linewidth of 1.1 MHz, and the low chirping of 2.8 Å at -20 dB at 2 Gb/s nonreturn to zero (NRZ) modulation have been achieved in the multiple quantum well (MQW) distributed feedback (DFB) p-substrate partially inverted buried heterostructure (PPIBH) laser diode. The spectral linewidth of 1.1 MHz is the narrowest value among 300-μm-length solitary laser diodes. These results suggest that the MQW-DFB laser diodes are a promising light source for longer distance and higher bit-rate optical communication systems and coherent optical communication systems     

Thermoelectric Properties of Multifilled Skutterudites with La as the Main Filler

Bulk multifilled n- and p-type skutterudites with La as the main filler were fabricated using the spark plasma sintering (SPS) method. The thermoelectric properties and thermal stability of these skutterudites were investigated. It was found that the interactions among the filling atoms also play a vital role in reducing the lattice thermal conductivity of the multifilled skutterudites. ZT = 0.76 for p-type La_0.8Ba_0.01Ga_0.1Ti_0.1Fe₃CoSb₁₂ and ZT = 1.0 for n-type La_0.3Ca_0.1Al_0.1Ga_0.1In_0.2Co_3.75Fe_0.25Sb₁₂ skutterudites have been achieved. Furthermore, the differential scanning calorimetry (DSC) results show that there is no skutterudite phase decomposition till 750°C for the La_0.8Ba_0.01Ga_0.1Ti_0.1Fe₃CoSb₁₂ sample. The thermal stability of the La_0.8Ba_0.01Ga_0.1Ti_0.1Fe₃CoSb₁₂ skutterudite is greatly improved. Using the developed multifilled skutterudites, the fabricated module with size of 50 mm × 50 mm × 7.6 mm possesses maximum output power of 32 W under the condition of hot/cold sides = 600°C/50°C.     

Sulfated Hyaluronan Binds to Heparanase and Blocks Its Enzymatic and Cellular Actions in Carcinoma Cells

We examined whether sulfated hyaluronan exerts inhibitory effects on enzymatic and biological actions of heparanase, a sole endo-beta-glucuronidase implicated in cancer malignancy and inflammation. Degradation of heparan sulfate by human and mouse heparanase was inhibited by sulfated hyaluronan. In particular, high-sulfated hyaluronan modified with approximately 2.5 sulfate groups per disaccharide unit effectively inhibited the enzymatic activity at a lower concentration than heparin. Human and mouse heparanase bound to immobilized sulfated hyaluronan. Invasion of heparanase-positive colon-26 cells and 4T1 cells under 3D culture conditions was significantly suppressed in the presence of high-sulfated hyaluronan. Heparanase-induced release of CCL2 from colon-26 cells was suppressed in the presence of sulfated hyaluronan via blocking of cell surface binding and subsequent intracellular NF-κB-dependent signaling. The inhibitory effect of sulfated hyaluronan is likely due to competitive binding to the heparanase molecule, which antagonizes the heparanase-substrate interaction. Fragment molecular orbital calculation revealed a strong binding of sulfated hyaluronan tetrasaccharide to the heparanase molecule based on electrostatic interactions, particularly characterized by interactions of (−1)- and (−2)-positioned sulfated sugar residues with basic amino acid residues composing the heparin-binding domain-1 of heparanase. These results propose a relevance for sulfated hyaluronan in the blocking of heparanase-mediated enzymatic and cellular actions.     

Mutated KIT Tyrosine Kinase as a Novel Molecular Target in Acute Myeloid Leukemia

KIT is a type-III receptor tyrosine kinase that contributes to cell signaling in various cells. Since KIT is activated by overexpression or mutation and plays an important role in the development of some cancers, such as gastrointestinal stromal tumors and mast cell disease, molecular therapies targeting KIT mutations are being developed. In acute myeloid leukemia (AML), genome profiling via next-generation sequencing has shown that several genes that are mutated in patients with AML impact patients’ prognosis. Moreover, it was suggested that precision-medicine-based treatment using genomic data will improve treatment outcomes for AML patients. This paper presents (1) previous studies regarding the role of KIT mutations in AML, (2) the data in AML with KIT mutations from the HM-SCREEN-Japan-01 study, a genome profiling study for patients newly diagnosed with AML who are unsuitable for the standard first-line treatment (unfit) or have relapsed/refractory AML, and (3) new therapies targeting KIT mutations, such as tyrosine kinase inhibitors and heat shock protein 90 inhibitors. In this era when genome profiling via next-generation sequencing is becoming more common, KIT mutations are attractive novel molecular targets in AML.     

Syndiotactic‐specific radical polymerization of N‐isopropylacrylamide in toluene at low temperatures in the presence of silyl alcohols

The radical polymerization of N‐isopropylacrylamide was carried out in toluene at low temperatures in the presence of silyl alcohols, such as triethylsilanol. Poly(N‐isopropylacrylamide) with a racemo dyad content of 75% was obtained at ? 80 °C with a 4:1 triethylsilanol to monomer ratio loading. NMR analysis suggests that the mechanism for syndiotactic induction, in the presence of silyl alcohols, may be similar to that observed with alkyl alcohols. In this case, a 1:2 complex formation, via hydrogen bonding interactions, leads to the induction of syndiotactic specificity. Copyright © 2012 Society of Chemical Industry     

WO3/BiVO4 composite photoelectrode prepared by improved auto-combustion method for highly efficient water splitting

We report on the improvement in the water splitting efficiency of a WO₃/BiVO₄ composite photoelectrode by the application of an improved auto-combustion method to the preparation of porous BiVO₄ thin films. The unique feature of this preparation method is the addition of both NH₄NO₃, as a strong oxidizing agent, and an organic additive into BiVO₄ precursor solution. The local decomposition heat of the organic additive and oxidizing agent created a porous film with small, highly crystalline BiVO₄ particles. The photoelectrode has many advantages over existing ones, such as the high light-harvesting efficiency (LHE), a single BiVO₄ phase, the facile access of the holes to the photoelectrode/electrolyte interface, and the ease of water and oxygen diffusion. The maximum incident photon-to-current efficiency (IPCE) was estimated to be 64% (at 440 nm, 1.23 V vs. RHE) and the applied bias photon-tocurrent efficiency (ABPE) reached as high as 1.28%. This ABPE value is highest among all oxide semiconductor photoelectrodes reported previously, except for the case of a stacking photoelectrode system.     

Simulation of a chemical reaction, 2LiH→Li2+H2, driven by doubly excitation

A direct computer simulation of reaction dynamics at the electronic excited states is not easy to perform, because nonadiabatic equations must be solved as a function of time. Here we present a simple simulation to integrate directly the time-dependent Schrödinger equation within the framework of the time-dependent density functional theory (for electrons) coupled with the Newtonian equation of motion (for nuclei). We find that a chemical reaction, 2LiH→Li₂+H₂, takes place by the doubly excitation. Along the reaction, a level crossing occurs automatically between the highest occupied and lowest unoccupied levels. The simulation demonstrates a mechanism for relaxation for the reactions driven by doubly excitation: electronic excited state changes smoothly into the electronic ground state leaving a kinetic energy of the atoms.     

Selective Raman Scattering Detection of the Dirac Node and the Anti-node of the Spin Density Wave Gap and Magnetic Excitations in BaFe2As2

The electronic and magnetic excitations at the spin density wave (SDW) transition are investigated by Raman scattering. The multi-orbital electronic states induce the Dirac nodes in the SDW gap. The excitations near the nodes and anti-nodes are separately detected in accordance with the two-orbital tight-binding model. The exchange interactions are found to be given by the second derivative of the total energy with respect to the angle of the moment from two-magnon scattering. The two-magnon peak has the large spectral weight above twice the maximum energy of magnon. It is interpreted by the magnetic self-energy of the electron spectral function in the localized spin model or particle-hole excitations in the itinerant spin model.     

Catalyst‐Free GaN Nanorods Synthesized by Selective Area Growth

GaN nanorod formation on Ga‐polar GaN by continuous mode metalorganic chemical vapor deposition selective area growth (MOCVD SAG) is achieved under a relatively Ga‐rich condition. The Ga‐rich condition, provided by applying a very low V/III ratio, alters the growth rates of various planes of the defined nanostructure by increasing relative growth rate of the semi‐polar tilted m‐plane {1–101} that usually is the slowest growing plane under continuous growth conditions. This increased growth rate relative to the non‐polar m‐plane {1–100} and even the c‐plane (0001), permits the formation of GaN nanorods with nonpolar sidewalls. In addition, a new growth mode, called the NH₃‐pulsed mode, is introduced, utilizing the advantages of both the continuous mode and the lower growth rate pulsed mode to form nanorods. Finally, nanorods grown under the different growth modes are compared and discussed.     

Quantitative Magneto-Optical Imaging of Supercurrents in Heavy-Ion Irradiated Cuprate and Pnictide Superconductors

Spatial distributions of magnetic field and of current density in superconductors are obtained, in real-time, by the magneto-optical imaging technique with an indicator film. Quantitative values of the local magnetic field and then of the local current density were achieved by a careful optical calibration and custom algorithms for the inversion of Biot–Savart law. An iterative procedure was developed for the correction of artifacts due to the coupling of the indicator film magnetization with the in-plane magnetic field generated by the superconducting sample. This technique is highly valuable when the sample under study has nonuniform properties. Several cases of such systems are shown. Particular attention is devoted to the local variation of structural and chemical properties by means of heavy-ion irradiation. A comparative study of swift-ion irradiation effects between cuprate and pnictide superconductors is addressed. For the case of cuprate materials, some successful applications of the heavy ion irradiation engineering are presented and discussed.