A mass separation of chondrocytes from cartilage tissue utilizing an automatic crushing device

Porcine articular cartilage tissue was crushed using Multi-Beads-Shocker^™ and digested with trypsin and collagenase type II. Chondrocyte cell yield was maximized by automatic crushing for 10 s, which was 4 times that by manual dicing with a surgical blade and might be useful for the automation of the cell processing.     

A 65 nm Single-Chip Application and Dual-Mode Baseband Processor With Partial Clock Activation and IP-MMU

Supporting both WCDMA with HSDPA and GSM/GPRS/EDGE, the 9.3 times 9.3 mm² SoC fabricated in triple-Vth 65 nm CMOS, has three CPU cores and 20 separate power domains. Unused power domains can be powered down to reduce the leakage power. Partial clock activation scheme especially focused on music playback scene dynamically stops a PLL and clock trees when not necessary and reduces power consumption from 33.6 mW to 19.6 mW. IP-MMU translates virtual address to physical address for 18 hardware-IPs and virtual address space can be allocated when necessary and can be freed after its operation, reducing external memory by 43 MB. Video performance of D1 (720 times 520) size with 30 frames per second for MPEG/AVC decoding and encoding can be achieved under mixed virtual and physical address usage.     

Molecular structures of gellan gum imaged with atomic force microscopy (AFM) in relation to the rheological behavior in aqueous systems in the presence of sodium chloride

Aqueous solutions of gellan gum with comparable molecular mass but with different acyl contents were investigated by atomic force microscopy and rheological measurements in the presence of sodium chloride (NaCl). Results obtained were discussed in relation to our previous report using potassium chloride (KCl) as an added salt. For a low-acyl sample, continuous fibrous network structures were identified microscopically as in the case of KCl. The network structures were more heterogeneous than those formed with KCl in terms of the height distribution of molecular assemblies. Rheological thermal hysteresis between sol–gel transitions was detected as in the case of KCl. The storage modulus (G′) of the gelled system was ca. 15% of the corresponding data with KCl at 20 °C. For a high-acyl sample, no continuous network structures were identified but branches with observable ends were identified as in the case of KCl. The hysteresis was less evident than the corresponding data with KCl and for the low-acyl sample with NaCl. Also, G′ values at 20 °C were ca. 30% and 20% of the corresponding data with KCl and for the low-acyl sample with NaCl, respectively. Continuousness and homogeneity of network structures related to the hysteresis and elasticity of the system, respectively.     

Photocatalytic hydrogenation of acetophenone derivatives and diaryl ketones on polycrystalline titanium dioxide

In the absence of molecular oxygen, various aromatic ketones such as acetophenone derivatives and diaryl ketones were photocatalytically hydrogenated on polycrystalline titanium dioxide (Degussa P25) under UV light irradiation (> 340 nm). The desired secondary alcohols were obtained with excellent chemical efficiency (almost 100% yields for 10 examples) by choosing ethanol as a sacrificial hole scavenger, which was oxidized into acetaldehyde.     

Parity induced edge-current saturation and current distribution in zigzag-edged graphene nano-ribbon devices

We show computationally that the current-voltage characteristics of the zigzag-edged graphene nanoribbon (ZGNR) with the even width exhibit remarkable current saturation behavior in spite of the absence of the bandgap. Mechanism of such current-saturation behavior can be understood to be originated from the symmetries of the wavefunctions corresponding to the edge states in ZGNR. We further demonstrate that the current-voltage characteristics of ZGNR can be drastically changed even by the presence of a single lattice vacancy, with the strong dependence on the position of the vacancy. The origin of such properties is intuitively understood by analyzing the transmission probabilities through such systems.     

A method to determine direct‐ and quadrature‐axis inductances of permanent magnet synchronous motors

The equivalent circuit constants of permanent magnet synchronous motors are needed in the calculation of operation characteristics, construction of a control system, etc. These constants can be computed from the data on structural form and materials. However, measurements are necessary to obtain highly precise values. Methods for measurement of the d‐ and q‐axis inductances can be roughly divided into rotational and standstill methods. The standstill methods have the advantage that they are easy to carry out. However, it is difficult to consider magnetic saturation and distortion of the change in the armature winding inductance. The accuracy of the standstill method can be improved if these effects can be readily taken into account. This paper describes a standstill method for measuring accurate d‐ and q‐axis synchronous inductances of permanent magnet synchronous motors. By utilizing the fact that the EMF interference terms in the motor voltage equation considering the distortion of the inductance change are equal to zero when the rotor is in a specific position, the proposed method determines the inductances considering both magnetic saturation and inductance distortion effects from simple off‐line standstill testing. In addition, this method is capable of taking cross‐magnetic saturation into account when used with the necessary testing equipment. The proposed method was implemented on a 0.4‐kW interior permanent magnet synchronous motor with concentrated stator winding. The validity of the proposed method was demonstrated by comparing the measured and calculated results of the no‐load and on‐load characteristics. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 171(3): 41–50, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20969     

Cloning and characterization of a β-N-acetylglucosaminidase (BmFDL) from silkworm Bombyx mori

In insects, β-N-acetylglucosaminidase (GlcNAcase) participates in critical physiological processes such as fertilization, metamorphosis, and glycoconjugate degradation. Insects produce glycoproteins carrying paucimannosidic-type N-glycans, the terminal GlcNAc residue of which is cleaved by a GlcNAc-linkage specific GlcNAcase, also known as the fused lobes (FDL) protein. To obtain information on the structure of GlcNAcases and insight into their contribution to physiological processes, we cloned Bombyx mori FDL (BmFDL) from silkworm larvae. The full-length cDNA (1.9 kb) encoded a protein of 633 amino acids with 42% amino acid sequence identity to Drosophila melanogaster FDL (DmFDL). Recombinant BmFDL cleaved only β-1,2-linked GlcNAc residues from the α-1,3 branch of biantennary N-glycan. This substrate specificity was similar to that of DmFDL. Microsomal FDL activity was inhibited by anti-BmFDL antibodies. Taken together, our results suggest that BmFDL is a N-glycan-processing GlcNAcase in B. mori.     

Template-free hydrothermal synthesis of hollow hematite microspheres

Hollow hematite (α-Fe₂O₃) microspheres with an average diameter of 3-4 μm and a shell thickness of approximate 150 nm was synthesized by a simple hydrothermal route using FeCl₃·6H₂O solution and acetic acid without using any templates. The hollow microspheres were composed of α-Fe₂O₃ nanoparticles with the diameter range from 20 to 40 nm. The effects of reaction parameters such as reaction time, temperature, concentration of FeCl₃·6H₂O solution, and initial pH on the morphology of the final products were investigated. A possible formation mechanism of hollow α-Fe₂O₃ microspheres was also proposed, where the acetic acid played a role of etching in the formation of hollow structure.     

Involvement of cytochrome P450 in hydroxylation of propylbenzene by Fusarium moniliforme strain MS31

Fusarium moniliforme strain MS31 can oxidize propylbenzene to (R)-1-phenylpropanol with what may be a cytochrome P450. Hydroxylation of propylbenzene needed molecular oxygen, and NADPH as a coenzyme gave a higher yield than NADH. The hydroxylation proceeded further when FAD and FMN were added than in their absence, suggesting that the enzyme was a flavo-protein. Carbon monoxide inhibited the hydroxylation, as did other cytochrome P450 inhibitors such as SKF 525A and miconazole. These characteristics matched those of a microsomal cytochrome P450 monooxygenase system that contained NADPH-cytochrome P450 reductase.     

Dependence of ion selectivity on ordered orientation of neutral carriers in ion-sensing membranes based on thermotropic liquid crystals

Thermotropic liquid-crystalline compounds were applied as membrane materials (membrane solvent and neutral carrier) for neutral carrier-type ion sensors to investigate how the ordered arrangement of neutral carriers affects the property of the resulting ion sensors. Nematic, smectic, and cholesteric liquid-crystalline compounds were used as the membrane solvents and crown ether derivatives with a molecular structure similar to the liquid-crystalline solvent as the K+ neutral carriers. Polarized IR spectroscopy and X-ray diffraction experiments confirmed that the highly ordered arrangement of membrane components was retained in the liquid-crystal-based ion-sensing membranes containing a neutral carrier and a lipophilic salt. The ordered arrangement of neutral carriers in the liquid-crystalline membranes enhanced the ion selectivity significantly, probably due to the efficient cooperation of two adjacent crown ether moieties in the highly ordered and aggregated state.