Deposition of BaTiO3 thin films by plasma MOCVD

Barium titanium trioxide (BaTiO₃) thin films were deposited on fused silica or silicon wafer substrate from barium dipivaloylmethanate (II) (Ba(dpm)₂) and titanium tetraisopropoxide (IV) (TTIP) used as precursors in an oxygen microwave plasma. The substrates were dielectrically heated and the substrate temperatures were around 900 K during the film deposition. The deposition was performed for 15 min and the deposits were identified as BaTiO₃ by means of X-ray diffraction, X-ray photoelectron spectroscopy, infrared spectroscopy, and ellipsometry. Oxygen and barium atoms and TiO and CO molecules were identified in the plasma. These species would produce higher deposition rates at lower substrate temperatures than those did in the usual thermal metalorganic chemical vapor deposition (MOCVD). The dielectric constant of the BaTiO₃ thin film that was directly deposited on the silicon wafer substrate was as low as 10¹ order of magnitude. Because the deposit reacted with the substrate and an interdiffusional layer was formed, the platinum layer was coated on the silicon wafer substrate in order to prevent the formation of an interdiffusional layer. The dielectric constant then increased to 10³ order of magnitude.     

High-velocity impact experiment of aluminum foam sample using powder gun

Porous materials such as aluminum foam have been investigated for possible use as impact shock absorbers in transportation aeronautic applications. However, the response of aluminum foam during impacts at high velocities of more than 100 m/s is not yet fully understood. A high-velocity impact experiment was therefore carried out to clarify impact shock absorption properties of aluminum foam. A one-stage powder gun was used to accelerate an aluminum foam sample to impact a rigid wall. Velocity and deformation of the aluminum foam sample during impact was studied using a digital high-speed video camera, while the pressure wave in the aluminum foam sample was measured using a PVDF gauge. The experimental observations revealed uneven collapse of the aluminum foam sample structure during high speed impact with a general stress plateau effect, typical for cellular material structures when subjected to quasi-static loading.     

Differential regulation of mitogen-activated protein kinase kinase 4 (MKK4) and 7 (MKK7) by signaling from G protein beta gamma subunit in human embryonal kidney 293 cells

Heterotrimeric G protein beta gamma subunit (Gbeta gamma) mediates signals to two types of stress-activated protein kinases, c-Jun NH2-terminal kinase (JNK) and p38 mitogen-activated protein kinase, in mammalian cells. To investigate the signaling mechanism whereby Gbeta gamma regulates the activity of JNK, we transfected kinase-deficient mutants of two JNK kinases, mitogen-activated protein kinase kinase 4 (MKK4) and 7 (MKK7), into human embryonal kidney 293 cells. Gbeta gamma-induced JNK activation was blocked by kinase-deficient MKK4 and to a lesser extent by kinase-deficient MKK7. Moreover, Gbeta gamma increased MKK4 activity by 6-fold and MKK7 activity by 2-fold. MKK4 activation by Gbeta gamma was blocked by dominant-negative Rho and Cdc42, whereas MKK7 activation was blocked by dominant-negative Rac. In addition, Gbeta gamma-mediated MKK4 activation, but not MKK7 activation, was inhibited completely by specific tyrosine kinase inhibitors PP2 and PP1. These results indicate that Gbeta gamma induces JNK activation mainly through MKK4 activation dependent on Rho, Cdc42, and tyrosine kinase, and to a lesser extent through MKK7 activation dependent on Rac.     

Formation mechanism of monodispersed spherical core-shell ceria/polymer hybrid nanoparticles

Very unique core-shell ceria (cerium oxide)/polymer hybrid nanoparticles that have monodispersed spherical structures and are easily dispersed in water or alcohol without the need for a dispersant were reported recently. The formation mechanism of the unique nanoparticles, however, was not clear. In order to clarify the formation mechanism, these nanoparticles were prepared using a polyol method (reflux heating) under varied conditions of temperature, time, and concentration and molecular weight of added polymer (poly(vinylpyrrolidone)). The size of the resultant nanoparticles was strongly and complicatedly dependent on the set temperature used during reflux heating and the poly(vinylpyrrolidone) molecular weight. Furthermore, the size of the nanoparticles increased by a 2-step process as the reflux heating time increased. The IR spectral changes with increasing reflux time indicated the increase in the number of cross-linked polymers in the shell. From these results, the formation mechanism was discussed and proposed.     

Oral Sustained Delivery of Theophylline and Cimetidine from In Situ Gelling Pectin Formulations in Rabbits

ABSTRACT

The aim of this study was to evaluate the potential of an in situ gelling pectin formulation as a vehicle for the oral sustained delivery of theophylline and cimetidine. In vitro studies demonstrated diffusion-controlled release of theophylline from 1, 1.5, and 2% w/v pectin gels. Release of this drug from 1.5% w/v pectin gels formed in situ in rabbit stomach was sustained over a period of 12 hours giving a theophylline bioavailability some seven fold higher than when administered from a commercial syrup. In contrast, interactions between cimetidine and pectin led to weak gelation of the pectin sols that prevented any meaningful determination of in vitro release characteristics. Similarly, in vivo release profiles from pectin formulations containing cimetidine were similar to that from a solution of this drug in buffer, indicative of weak gelation. Examination of the content of the rabbit stomach 5 hours after administration of 1.5% w/v pectin sols containing drug confirmed gel formation, but gels containing cimetidine were noticeably softer than those containing theophylline.     

Changes of activity inducing chromosomal aberrations and transformations of chlorinated humic acid.

The change of the toxicity of chlorinated water after chlorine injection was examined. For the measurement of toxicity, chromosomal aberration test and transforming test were carried out as indexes to initiating activity and to promoting activity in the carcinogenesis process, respectively. Activity inducing chromosomal aberrations of chlorinated humic acid gradually decreased with time after chlorination. In contrast, activity inducing transformations measured by the two-stage assay gradually increased. Thus, the toxicity that decreases or increases is present in chlorinated water. Furthermore, activity inducing transformations measured by the non-two-stage assay gradually decreased. This direction of change was reverse to that of activity inducing transformations by the two-stage assay and consistent with that of activity inducing chromosomal aberrations. It is speculated that the main reason of decreasing activity inducing transformations by the non-two-stage assay is because initiating activity detected as activity inducing chromosomal aberrations in chlorinated water decreases drastically. Directions of changes of total organic halogen and carbonyl group were qualitatively consistent with that of activity inducing chromosomal aberrations. Directions of changes of chloroform and dichloroacetic acid were qualitatively consistent with that of activity inducing transformations by the two-stage assay. Findings of this study suggest that further research is necessary to compare carcinogenicity of tap water near water purification plant and distant tap water.     

Reduction of return current noise by energy‐compensating active control

A newly proposed energy‐compensating active control is implemented to reduce the return current noise which is caused by inverter‐driven electric car systems. The energy‐compensating active control detects the energy charged at the filter capacitor, and reduces the energy and current of the noise frequency component by simple feedback loop incorporated with the conventional motor torque controller. No additional sensors or circuit arrangements are necessary; therefore, the return current can be attenuated effectively without any further cost. The return current with an inverter system is measured using a current probe and an FFT analyzer, and it is shown that the 25‐Hz noise current is reduced by up to 10 dB with the control. The results reveal that the low‐frequency return current noise can be attenuated with the simple control scheme, which would expectedly reduce the size of filter reactors and capacitors to meet the current limit level of the signaling system's track relays. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 165(4): 84–91, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20615