Transient thermal stresses in a composite hollow cylinder subjected to γ-ray heating

Transient temperature and thermal-stress distributions arising in an infinite long composite hollow circular cylinder subjected to internal heat generation decaying exponentially along the wall thickness resulting from γ-ray radiation are analyzed, under the thermal conditions of cooling by convection on the inner surface and insulation on the outer surface. Numerical calculations of the transient temperature and thermal-stress distributions are carried out for the case of a composite cylinder of stainless steel and carbon steel. The influence of the absorption coefficient, the Biot number and the splicing radius on the results are considered.     

Creep rupture properties of homopolymer,copolymer, and terpolymer based on poly(oxymethylene)

Polyacetal copolymers were prepared by cationic ring‐opening copolymerizations of 1,3,5‐trioxane (TOX) with 1,3‐dioxolane (DOX), and polyacetal terpolymers were prepared by terpolymerizations of TOX, DOX, and 2‐ethylhexyl glycidyl ether (EHGE). Polyacetal polymers with three different structures such as polyacetal homopolymers, polyacetal copolymers, and polyacetal terpolymers were compared in the mechanical properties and the creep characteristics, and discussed from the view point of the polymer structure. The polyacetal copolymers and the polyacetal terpolymers were determined by ¹H‐MNR measurement. About 80 mol % of DOX and EHGE amounts in feed were incorporated randomly into the each polymer. From the plots of the degree of crystallinity (X_c) versus the tensile strength, the tensile strength and crystallintiy of the polyacetal homopoymers are higher than those of the polyacetal copolymers and the polyacetal terpolymers. However, the tensile strength does not decrease linearly with a decrease in the crystallinity among the polyacetal polymers with three different structures, the polyacetal homopolymer, the polyacetal copolymers, and the polyacetal terpolymers. Creep rupture was characterized by the activation volume, υ_c, value in Zhurkov's equation, which can be estimated from the slope in the plots of load versus log (rupture time) at 80°C. The polyacetal polymers with higher molecular weight have larger values of the activation volume than those with lower molecular weight. When the activation volume values are compared among the polyacetal polymers with the same molecular weights, they increase in the following order: the polyacetal homopolymers < the polyacetal copolymers < polyacetal terpolymers. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Proton-conducting electrolyte membranes based on hyperbranched polymer with a sulfonic acid group for high-temperature fuel cells

The hyperbranched polymers (HBP-SA-Acs) with both a sulfonic acid group as a functional group and an acryloyl group as a cross-linker at terminals in different ratios of sulfonic acid group/acryloyl group (SO₃H/Ac) were successfully synthesized as a new thermally stable proton-conducting electrolyte. The cross-linked hyperbranched polymer electrolyte membranes (CL-HBP-SAs) were prepared by thermal polymerizations of the HBP-SA-Acs using benzoyl peroxide, and their ionic conductivities under dry condition and thermal properties were investigated. The ionic conductivities of the CL-HBP-SAs were found to be in the range of 2.2 × 10⁻⁴ to 3.3 × 10⁻⁶ S/cm, depending upon the SO₃H unit contents, at 150 °C under dry condition, and showed the Vogel-Tamman-Fulcher (VTF) type temperature dependence, indicating that proton transfer is cooperated by local polymer chain motion. All CL-HBP-SAs were thermally stable up to 260 °C, and they had suitable thermal stability as electrolyte membranes for the high-temperature fuel cells under dry condition. Fuel cell measurement using a single membrane electrode assembly cell with a cross-linked electrolyte membrane was successfully performed under non-humidified condition. It was demonstrated that applying the concept of dry polymer system to proton conduction is one possible approach toward high-temperature fuel cells.     

Effects of rice straw returning methods on N<Subscript>2</Subscript>O emission during wheat-growing season

A field experiment was conducted in Jurong of Nanjing, Jiangsu Province, China from 2006 to 2008 to investigate N₂O emission during the wheat-growing season as affected by various rice straw returning methods prior to wheat cultivation. The study was designed to have four treatments: no rice straw applied (CK), rice straw burnt in situ (RB), rice straw evenly incorporated into the topsoil (RI), rice straw evenly spread over the field as mulch (RM). Results showed that N₂O emission was decreased by 24–29% in Treatment RB and by 3–18% in Treatment RI, but increased by 15–39% in Treatment RM, compared with that in Treatment CK. The contents of soil total C and N at wheat harvest were significantly increased by 7–13% and by 8–12% in Treatment RI, respectively, compared with that in Treatment CK. The wheat grain yield in Treatment RI was 1.0–1.2 times that in the Treatment CK. Based on these results, the best management practice of returning rice straw to the soil prior to wheat cultivation is evenly incorporating rice straw into the topsoil, as the method tended to reduce N₂O emission during the wheat-growing season and increase wheat yield and soil fertility.     

Effect of Absolute Configuration on the Optical and NMR Properties of Oligonucleotides Containing Benzo[a]Pyrene Adducts at N 6 of Deoxyadenosine

For oligonucleotide duplexes derived from trans opening of benzo[a]pyrene diol epoxides (BaP DEs) by the exocyclic N⁶-amino group of deoxyadenosine (dA), the hydrocarbon is intercalated toward the 5′-end of the modified strand when the configuration at the site of attachment of the base to the hydrocarbon (C-10) is R, and toward the 3′-end when this configuration is S. In oligonucleotide 11-mer duplexes modified by BaP DE-1 (benzylic 7-OH and epoxide oxygen cis) and DE-2 (7-OH and epoxide oxygen trans), as well as 7,8,9,10-tetrahydro BaP 9,10-epoxide, 10R adducts had consistently higher (5–9d°C) T_m values than the corresponding 10S adducts. Dodecamer duplexes from the HPRT gene with trans opened 10S (but not those with 10R) BaP DE-2 adducts at either of two adjacent dA residues exhibited blue shifts at ～350 nm at temperatures well below the T_m. We propose that these blue shifts result from a conformation in which the hydrocarbon is not stacked with the DNA bases.     

Geology and fluid chemistry of the Fushime geothermal field, Kyushu, Japan

The Fushime geothermal field is located in a depression close to the coast line. The system is characterized by very high reservoir temperature (>350°C), and a high salinity production fluid. Geological analysis shows that the main reservoir in this field occurs in a fractured zone developed around a dacite intrusion located in the center of the field. High permeability zones recognized by drilling data are found to be associated with fault zones. One of these zones is clearly associated with a NW–SE trending andesite dike swarm which was encountered in some wells.Alteration in the system can be divided into four zones, in order of increasing temperature, based on calcium–magnesium aluminosilicate mineral assemblages: i.e., the smectite, transition, chlorite and epidote zones. The feed zone is located in the chlorite and epidote zones, which can be further divided into three sub-zones according to their potassium or sodium aluminosilicate mineralogy, from the center of the discharge zone: K-feldspar–quartz, sericite–quartz, and albite–chlorite zones.Chloride concentration of the sea-water is 19,800 mg/l, and Br/Cl mole ratio is 1.55. Based on geochemical information, the reservoir chloride concentration of this field ranges from 11,600 to 22,000 mg/kg. The Clres (Cl in reservoir), Br/Cl ratios and stable isotope data indicate that the Fushime geothermal fluid originated from sea-water and is diluted by ground water during its ascent. Some fluids produced from geothermal wells show low pH (about 4). It is thought that sulfide mineral (PbS, ZnS) precipitation during production produces this acidic fluid.     

Long-term evaluation of combined antihypertensive therapy with lisinopril and a thiazide diuretic in patients with essential hypertension

For the treatment of hypertension, the combination of an angiotensin-converting enzyme (ACE) inhibitor and a thiazide diuretic is supported by multiple lines of evidence, because these drugs have synergistic action and are expected to cancel out each other's adverse side effects. However, the long-term outcome of this combination antihypertensive therapy is not entirely clear. In the present multicenter open trial, we investigated the long-term efficacy and safety of combined antihypertensive therapy with an ACE inhibitor, lisinopril, and a thiazide diuretic, trichlormethiazide. A total of 466 patients with essential hypertension were treated with lisinopril alone (monotherapy group, n = 360) or with a combination of lisinopril with trichlormethiazide (combination therapy group, n = 106) for 1 year. The average blood pressure was effectively lowered to below 150/90 mmHg in both the monotherapy and the combination therapy groups throughout the study period. The average maintenance dose of lisinopril was lower when combined with thiazide than when given alone (9.8 vs. 11.5 mg/day, p < 0.001). Dry cough was the major side effect of lisinopril; no severe adverse effects were observed. The incidence of cough was not significantly different between the monotherapy group (13.1%) and the combination therapy group (11.3%). The increase in serum potassium observed in the monotherapy group was reversed by the concurrent use of the thiazide diuretic in the combination therapy group. Fasting blood glucose was significantly reduced in the monotherapy group; the reduction observed in the combination therapy group was not significant. Thus, the present results provide useful information as to the effectiveness and safety of combined antihypertensive therapy with lisinopril and a thiazide in comparison with monotherapy with lisinopril.     

Growth and photoreactive properties of a- and c-axis cerium-doped strontium barium niobate single-crystal fibers

The authors report on the photorefractive properties of cerium-doped strontium barium niobate (Ce:SBN60) single-crystal fibers grown by the laser-heated pedestal growth method. Single-crystal fibers, 250 mu m in diameter, were successfully grown along both the a- and c-axes. The diffraction efficiency and grating formation time results for each fiber in two beam coupling experiments are compared, with emphasis on their crystal orientation and relevant figure of merit. It is found that the hologram efficiency of the a-axis fiber is larger than that of the c-axis fiber and that its grating formation time is faster. The results suggest that Ce-doped SBN single-crystal fiber grown along the a-axis is a promising candidates for holographic storage, parallel data processing, and phase-conjugation mirrors.<>     

Real-Time Omnidirectional Image Sensors

Conventional T.V. cameras are limited in their field of view. A real-time omnidirectional camera which can acquire an omnidirectional (360 degrees) field of view at video rate and which could be applied in a variety of fields, such as autonomous navigation, telepresence, virtual reality and remote monitoring, is presented. We have developed three different types of omnidirectional image sensors, and two different types of multiple-image sensing systems which consist of an omnidirectional image sensor and binocular vision. In this paper, we describe the outlines and fundamental optics of our developed sensors and show examples of applications for robot navigation.