Structural Analysis of the Complex between Penta-EF-Hand ALG-2 Protein and Sec31A Peptide Reveals a Novel Target Recognition Mechanism of ALG-2

ALG-2, a 22-kDa penta-EF-hand protein, is involved in cell death, signal transduction, membrane trafficking, etc., by interacting with various proteins in mammalian cells in a Ca²⁺-dependent manner. Most known ALG-2-interacting proteins contain proline-rich regions in which either PPYPXnYP (type 1 motif) or PXPGF (type 2 motif) is commonly found. Previous X-ray crystal structural analysis of the complex between ALG-2 and an ALIX peptide revealed that the peptide binds to the two hydrophobic pockets. In the present study, we resolved the crystal structure of the complex between ALG-2 and a peptide of Sec31A (outer shell component of coat complex II, COPII; containing the type 2 motif) and found that the peptide binds to the third hydrophobic pocket (Pocket 3). While amino acid substitution of Phe⁸⁵, a Pocket 3 residue, with Ala abrogated the interaction with Sec31A, it did not affect the interaction with ALIX. On the other hand, amino acid substitution of Tyr¹⁸⁰, a Pocket 1 residue, with Ala caused loss of binding to ALIX, but maintained binding to Sec31A. We conclude that ALG-2 recognizes two types of motifs at different hydrophobic surfaces. Furthermore, based on the results of serial mutational analysis of the ALG-2-binding sites in Sec31A, the type 2 motif was newly defined.     

Breakdown Characteristics of N2O Gas Mixtures for Quasiuniform Electric Field under Lightning Impulse Voltage

From the viewpoint of mitigating global warming by SF₆ gas, this paper discusses breakdown (BD) characteristics of different electronegative gas mixtures with N₂O gas as SF₆ gas substitutes for quasi-uniform electric field under lightning impulse voltage applications. Experimental results revealed the positive synergism in breakdown strength of binary N₂O / CO₂ and ternary N₂O / CO₂ / O₂ gas mixtures, respectively. Furthermore, N₂ gas as a retardant gas was also mixed with the electronegative gas mixtures in order to reduce the electron energy into the effective levels of electron attachment ability by the electronegative gas mixtures. As the result, ternary N₂O / CO₂ / N₂ and quaternary N₂O / CO₂ / O₂ / N₂ gas mixtures could exhibit the significant synergistic effect in breakdown strength. The optimum mixture rate of quaternary N₂O / CO₂ / O₂ / N₂ gas mixtures was consistent with that estimated by assuming the independent contribution of component gases to the improvement of impulse BD characteristics.     

A New CMC-AA Resin/Inorganic-gel Super Absorbent Material

A super absorbent material was prepared with the super absorbent resin （ SAR ） and inorganic gel. The SAR of the carboxymethyl cellulose grafting acrylic acid （ CMC-AA ） was copolymer synthesized using the method of inverse-phase suspension polymerization. The influences of the monomer concentration, neutralization degree, the initiator, dispersion agent, cross-linking agent, reaction and drying temperature on the grafting copolymer properties were examined. Meanwhlie, its properties was investigated and the model for absorption mechanism of this absorbent composite was proposed.     

Preparation of PZT Thin Films by Liquid-Source MOCVD Using of Cyclohexane Solvent

Pb(Zr, Ti)O₃ thin films were grown on 8-inch Ir(111)/SiO₂/Si substrate by a MOCVD system aiming at application utilizing high-density ferroelectric memory (FRAM). Two types of solvents, THF and cyclohexane were used for liquid source delivery. It was found that the ferroelectric properties of the MOCVD-PZT films using cyclohexane solvent were better than them using THF solvent. By choosing cyclohexane as solvent, the MOCVD-PZT thin films showed strong ?111? preferred orientation and the Pt/PZT/Ir capacitors exhibited promising ferroelectric performances, for instance, large switching charge (Qsw) of 56.4 uC/cm².     

Vision-Based Navigation for an Electric Wheelchair Using Ceiling Light Landmark

This paper presents an autonomous wheelchair system with the capability of self-location and obstacle avoidance. The wheelchair is equipped with two TV cameras that are used for self-location and obstacle avoidance, respectively. In this system, the fluorescent ceiling lights are chosen as landmarks since they can be easily detected and do not require an additional installation. A recognition procedure of landmarks is described by which the desired landmark images in the navigational environment can be retrieved. A self-location technique using ceiling light landmarks is proposed. Using this self-location function, the wheelchair can locate itself in a world coordinate system. The path planning based on landmark and the method of generating a control scheme are presented so that the wheelchair is capable of navigating along any path from start position to goal position. A low cost and high-speed vision system for the detection and avoidance of obstacle is developed and the principal of obstacle avoidance is introduced. A number of navigation experiments are conducted for the wheelchair in an indoor environment. The experimental results indicate the effectiveness of the wheelchair system.     

Multiple fuzzy state-value functions for human evaluation through interactive trajectory planning of a partner robot

The purpose of this study is to develop partner robots that can obtain and accumulate human-friendly behaviors. To achieve this purpose, the entire architecture of the robot is designed, based on a concept of structured learning which emphasizes the importance of interactive learning of several modules through interaction with its environment. This paper deals with a trajectory planning method for generating hand-to-hand behaviors of a partner robot by using multiple fuzzy state-value functions, a self-organizing map, and an interactive genetic algorithm. A trajectory for the behavior is generated by an interactive genetic algorithm using human evaluation. In order to reduce human load, human evaluation is estimated by using the fuzzy state-value function. Furthermore, to cope with various situations, a self-organizing map is used for clustering a given task dependent on a human hand position. And then, a fuzzy state-value function is assigned to each output unit of the self-organizing map. The robot can easily obtain and accumulate human-friendly trajectories using a fuzzy state-value function and a knowledge database corresponding to the unit selected in the self-organizing map. Finally, multiple fuzzy state-value functions can estimate a human evaluation model for the hand-to-hand behaviors. Several experimental results show the effectiveness of the proposed method.     

Preparation and characterization of porous and electrically conducting carbon-clay composites

Porous and electrically conducting carbon-clay composites were prepared by firing mixtures of carbon powder (0 to 20 wt%) and clay minerals. They showed porosity of 50 to 65% and had high mechanical strength (compressive strength = 130 to 400 kg cm^–2) as well as high resistance against thermal oxidation in air. Their electrical conductivity, , increased with increasing carbon content levelling off at about 20 wt% of carbon content to give a value of about 2 S cm^–1. Formation of carbon chains is considered to be responsible for the electrical conduction in the composite, and a model to correlate the electrical conductivity with the carbon content has been proposed by modifying a model previously proposed by Scarisbrick.     

Development of a dual‐lamp projector with higher brightness

Stationary projectors mainly used in system applications have recently gained a wider application range, including general presentations in halls and large conference rooms and being used, for example, in digital signage and for monitoring purposes. Consequently, they are required to meet new market demands for durability, reliability, and flexibility in installation in addition to their conventional basic performance such as especially high brightness. To achieve especially high brightness, a new optical system with two lamps is proposed; the profile of the cover glass that prevents the glass from scattering is made aspherical, the profile of the beam‐combining mirror is improved with its position optimized, and the size of the incident plane of the integrator rod is made larger (1.1 times). These measures resulted in an optical system of an even higher efficiency with 7000 lm, which is the highest in its class (according to a June 2010 investigation). Also, the arrangement of two parallel lamps completely eliminated the effect of heat passing from one lamp to the other, which helped secure durability, reliability, and flexibility in installation. Furthermore, the combined use of the unique non‐telecentric optical system, adopted from the conventional single‐lamp model, helps maintain the class‐highest contrast ratio.^1,2     

Angular resolution of the Ohya air shower detector

Accurate measurements of the total number of muons in an air shower are important for the discrimination of showers produced by astronomical gamma rays from those produced by protons. In order to perform this discrimination, muon detectors with a total area of about 400 m² have been constructed in the Ohya stone mine. At ground level, scintillation detectors have been distributed for determining the total number of electrons in the air shower. The arrival direction of the air shower determined by usual timing information was examined using independent data on the arrival direction determined by muons in the shower. The angular resolution thus obtained at the shower maximum is 1.7° in the south-north plane and 2° in the east-west plane. The difference of the resolution is due to the asymmetric arrangement of scintillation detectors.