Regeneration characteristics of desiccant rotor with microwave and hot-air heating

Microwave heating, because of its advantages of direct and rapid heating of materials, has the potential to be employed as a novel regeneration method of desiccant rotors in humidity conditioners. We proposed a combined regeneration process, which combines microwave heating and conventional hot-air heating. The system is expected to achieve high heating rate during an initial regeneration period by assisting water desorption using the additional energy of the microwave. In this study, the regeneration characteristics of a desiccant rotor were experimentally investigated under conditions of microwave heating, hot-air heating, and combined heating at various microwave powers and hot-air temperatures. The effectiveness of the combined regeneration was evaluated in terms of the regeneration ratio, the initial regeneration rate, the temperature distribution in the rotor, and finally in terms of the energy consumption. It was demonstrated that combined heating was effective at leveling non-uniform temperature distribution in the rotor. Combined heating achieved higher ratios and initial rates in regeneration compared to just microwave and hot-air heating. This result was obviously attributed to the additional input of microwave energy, resulting that average rotor temperature increased by microwave absorption of rotor. Moreover, it was also effective for enhancement of regeneration to level the temperature distribution in the rotor by combination of two heating methods with different heating mechanisms. Both the initial regeneration rate and the equilibrium regeneration ratio for combined heating were found to increase as the microwave power increased. A linear relationship was observed with respect to microwave power. From the viewpoint of energy consumption, it may be possible to apply combined and microwave heating to humidity control systems that switch between adsorption and regeneration in short cycle times, if the conversion and absorption efficiencies of the microwave are significantly improved.     

Purification and characterization of a novel glutamyl aminopeptidase from chicken meat

A novel glutamyl aminopeptidase (aminopeptidase A, EC 3.4.11.7) was purified from chicken meat by ammonium sulfate fractionation, ethanol fractionation, heat treatment, and successive column chromatographies of DEAE-Sepharose CL-6B and Sephadex G-200. The purified enzyme migrated as a single band on SDS-PAGE. The molecular weight of this enzyme was found to be 55,000 and 550,000 by SDS-PAGE and Sephadex G-200 column chromatographies, respectively. This enzyme hydrolyzed Glu- and Asp-, but not Leu-, Arg-, and Ala-2-naphthylamide (-2NA) at all. The optimum pH and temperature for hydrolysis of Glu-2NA was 7.5. and 70°C, respectively. Reducing agents such as cysteine and dithiothreitol inhibited the activity of this enzyme at concentrations of 1 mM. However, the activation by Ca(2+) and the inhibition by amastatin were not observed.     

Identification of Aloe species by random amplified polymorphic DNA (RAPD) analysis

Juice and integument of leaves of 3 Aloe species, Aloe vera, A. ferox and A. africana, are not allowed to be used as food according to the Pharmaceutical Affairs Law in Japan. On the other hand, whole leaves of A. arborescens can be used as food. The present study was designed to distinguish Aloe species by random amplified polymorphic DNA (RAPD) analysis. DNA was isolated from fresh and dried leaves of the 4 Aloe species. Five out of 32 different 10-mer primers examined were useful for analysis. By comparison of the characteristic bands of PCR products on agarose gel, it was possible to distinguish the 4 species. Thus, the botanical species of Aloe in commercial food products can be identified by RAPD analysis.     

Effect of treatment of activated carbon fiber cloth electrodes with cold plasma upon performance of electric double-layer capacitors

Charge/discharge behavior of electric double-layer capacitors composed of activated carbon fiber cloth (ACFC) electrodes and an organic electrolyte was investigated. The modification of the ACFC electrodes was performed using cold plasma generated in argon-oxygen atmosphere. The effect of the cold plasma treatment of the ACPC electrodes on the capacitor performance was discussed on the basis of the physical and chemical properties of the ACFC surface such as pore radius distribution and surface atom concentration.     

CoCl(2) inhibits neural differentiation of retinoic acid-treated embryoid bodies

The effects of CoCl(2) on retinoic acid (RA)-treated embryoid bodies (EBs) were investigated. Four-day EBs were treated with 5x10(-6) M of RA for 4 d, then subjected to attached culturing for 7 d in the presence of CoCl(2) at 0, 20, and 100 microM. Differentiation into MAP2- and GFAP-immunopositive cells was inhibited by CoCl(2) in a dose-dependent manner. Next, RA-treated EBs were dissociated into single cells and cultured for 7 d at an initial cell density of 1x10(3)/cm(2). The number of cells increased in a CoCl(2)-dose dependent fashion. In cultures with 100 microM of CoCl(2), more than 90% of the cells were immunopositive for nestin and nestin-immunopositive cells formed clusters, while there were few cells immunopositive for MAP2 or GFAP. These results suggest that CoCl(2) inhibits neural differentiation of RA-treated EB cells and promotes the proliferation of nestin-immunopositive cells, i.e., embryonic stem (ES)-derived neural stem-like cells.     

Antioxidant effects of flavonoids used as food additives (purple corn color, enzymatically modified isoquercitrin, and isoquercitrin) on liver carcinogenesis in a rat medium-term bioassay

To clarify the effects of purple corn color, enzymatically modified isoquercitrin (EMIQ), and isoquercitrin (IQ), registered as natural food additives in Japan, on liver carcinogenesis in vivo, a medium-term bioassay was employed. A total of 100 male F344 rats were divided into 5 groups; groups 1 to 4 were given a single intraperitoneal injection of diethylnitrosamine (200 mg/kg b.w.) on day 1. From weeks 2 to 8, they were administered basal diet purple corn color, EMIQ, or IQ as containing test chemicals at doses of 1.0% (groups 1 and 5), 0.1% (group 2), 0.01% (group 3), or 0% (group 4) (experiments 1, 4, and 5). All rats were subjected to two-thirds partial hepatectomy at week 3 and were sacrificed at week 8. Purple corn color exerted no significant modifying effects on GST-P positive foci, preneoplastic foci, development in the liver. However, serum of rats treated with purple corn color provided evidence of antioxidant power significantly by potential antioxidant (PAO) test in vivo (experiment 2). And microarray analyses showed purple corn color to induce RNA expression such as P450 (cytochrome) oxidoreductase, phosphatidylinositol 3-kinase, and phospholipase A2 (experiment 3). Higher doses of EMIQ or IQ with strong antioxidant power in vivo by PAO test treated groups were correlated with smaller numbers of GST-P positive foci, with Spearman's rank correlation coefficients of P= 0.002 and P= 0.049, respectively (experiments 4 and 5). Therefore, the tested food additives may be effective as antioxidants in vivo and have chemopreventive potential against liver preneoplastic lesion development.     

Aggregate formation of rCHO cells and its maintenance in repeated batch culture in the absence of cell adhesion materials

Aggregate formation of recombinant Chinese hamster ovary (rCHO) cells capable of producing granulocyte colony-stimulating factor (G-CSF), using medium lacking cell adhesion materials in a repeated batch culture, was examined together with cell growth, cell viability and G-CSF production. The rCHO culture was conducted in a rotary shaker and the medium was changed every five days. The formation of stable cell aggregates with high reproducibility was observed after the first medium change. The size of the cell aggregates (consisting of several 10s to 40,000 cells) formed during the repeated batch culture ranged from 30 to 600 microm. The cell density of the aggregates reached as high as 2 x 10(6) cells/ml and the viability was maintained at more than 80% for 19 d. Changing the medium to avoid glucose exhaustion effectively maintained the cell density, cell viability and G-CSF productivity at high levels.     

Impingement heat transfer by jet issuing from a cross-shaped nozzle

Heat transfer characteristics and flow patterns were measured over a plate for various separation distances between the nozzle exit and target plate when air issues from a sharp-edged cross-shaped nozzle and impinges on a plate. The local heat transfer coefficients in the radial direction for different circumferential positions were calculated using the wall temperatures measured by means of thermocouples, and flow patterns were observed using an oil-titanium IV oxide method. The isotherms of the infrared images were also measured using an infrared radiometer with a two-dimensional array of indium-antimony (InSb) sensors. The geometric axes were switched as a result of the self-induced velocity of a vortex filament; the convex corners became flat and the concave corners generated outward ejection. The distributions of the iso-heat transfer coefficient contours correspond well to the flow pattern and the isotherm contours. These contours extended diagonally and demonstrated the St. Andrew's cross pattern for short separations, subsequently changing to an octagonal pattern, and then becoming circular at large separations. The correspondence of the heat transfer characteristics to the flow behavior, as well as the heat transfer mechanism are also described. © 1998 Scripta Technica, Heat Trans Jpn Res, 27(3): 192–204, 1998     

Effect of proton irradiation on electrical properties of CuInSe2 thin films

High-energy proton irradiation (380 keV and 1 MeV) on the electrical properties of CuInSe₂ (CIS) thin films has been investigated. The samples were epitaxially grown on GaAs (0 0 1) substrates by Radio Frequency sputtering. As the proton fluence exceeded 1×10¹³ cm⁻², the carrier concentration and mobility of the CIS thin films were decreased. The carrier removal rate with proton fluence was estimated to be about 1000 cm⁻¹. The electrical properties of CIS thin films before and after irradiation were studied between 80 and 300 K. From the temperature dependence of the carrier concentration in CIS thin films, we found N_D=9.5×10¹⁶ cm⁻³, N_A=3.7×10¹⁶ cm⁻³ and E_D=21 meV from the fitting to the experimental data on the basis of the charge balance equation. After irradiation, a defect level was created, and N_T=1×10¹⁷ cm⁻³ for a fluence of 3×10¹³ cm⁻², N_T=5.7×10¹⁷ cm⁻³ for a fluence of 1×10¹⁴ cm⁻² and E_T=95 meV were also obtained from the same fitting. The new defect, which acted as an electron trap, was due to proton irradiation, and the defect density was increased with proton fluence.     

Effect of 8 MeV electron irradiation on electrical properties of CuInSe2 thin films

Radiation damages due to 8 MeV electron irradiation in electrical properties of CuInSe₂ thin films have been investigated. The n-type CuInSe₂ films in which the carrier concentration was about 3×10¹⁶ cm⁻³, were epitaxially grown on a GaAs(0 0 1) substrate by RF diode sputtering. No significant change in the electrical properties was observed under the electron fluence <3×10¹⁶ e cm⁻². As the electron fluence exceeded 10¹⁷ e cm⁻², both the carrier concentration and Hall mobility slightly decreased. The carrier removal rate was estimated to be about 0.8 cm⁻¹, which is slightly lower than that of III–V compound materials.